Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.     

The first example of a liquid crystalline side-chain polymer with bent-core mesogenic units: ferroelectric switching and spontaneous achiral symmetry breaking in an achiral polymer

A dimethylsiloxane diluted polysiloxane side chain co-polymer with non-chiral banana-shaped mesogenic units shows an optically isotropic ferroelectric switching polar smectic C phase (SmCPF) consisting of a conglomerate of homogeneously chiral domains with opposite handedness.     

Metabolic profiling of normal and hypertensive rat kidney tissues by hrMAS-NMR spectroscopy

Intact kidney tissue samples of normal and spontaneously hypertensive rats (SHRs) were analyzed by hrMAS-NMR spectroscopy and principal component analysis (PCA). Radial components (cortex, outer stripe of the outer medulla, inner stripe of the outer medulla, and papilla) were sampled from various regions across the kidney from multiple animals in order to establish inter- and intra-animal variability. The effects of temperature were also measured. Papilla was differentiated from the other tissue types, and this variation by tissue type was greater than the effect of temperature on the samples (spectra were compared from samples at 2 and 30 °C). This study also revealed long term stability issues of tissue storage at -80 °C. The PCA showed that the greatest differentiation between normal rats and SHRs was found in the cortex and the regions in the NMR spectra that were correlated with this variation were identified.Abbreviations hrMAS High-resolution magic angle spinning - NMR Nuclear magnetic resonance - PCA Principal component analysis - CSA Chemical shift anisotropy - DD Dipolar coupling - SHR Spontaneously hypertensive rat     

Role of surface crossings in the photochemistry of nitromethane

The photodissociation dynamics of nitromethane (CH(3)NO(2)) starting at the S(3) excited state has been studied at the complete active space self-consistent field level of theory in conjunction with atomic natural orbital type basis sets. In addition, the energies of all the critical points and the energy profiles connecting them have been recomputed with the multiconfigurational second-order perturbation method. It is found that the key step in the reaction mechanism is a radiationless decay through an S(3)S(2) conical intersection. The branching space spanned by the gradient difference and nonadiabatic coupling vectors of this crossing point comprises dissociation into excited nitromethane plus singlet atomic oxygen [CH(3)NO(1A")+O((1)D)] and S(3)-->S(2) deactivation, respectively. Furthermore, deactivated nitromethane S(n (n<3)) can decompose in subsequent steps into CH(3)+NO(2), where NO(2) is generated at least in two different electronic states (1 (2)B(2) and 1 (2)A(1)). It is shown that formation of excited nitric oxide NO(A (2)Sigma) arises from CH(3)NO(1A") generated in the previous step. In addition, four crossings between singlet and triplet states are localized; however, no evidence is found for a relevant role of such crossings in the photochemistry of CH(3)NO(2) initiated at S(3) state in the gas phase.     

Analysis of free and esterified sterols in vegetable oil methyl esters by capillary GC

The introduction of quality standards for vegetable oil methyl esters is gaining in importance due to their increased use as diesel fuel substitutes and as technical products. Free and esterified sterols, the main constituents of the unsaponifiable matter in vegetable oils, are recovered in vegetable oil methyl esters and may influence the technical properties of vegetable oil methyl ester products. A rapid gas chromatographic method for the qualitative and quantitative determination of free and esterified sterols in vegetable oil methyl esters has therefore been developed. The concentration of the free sterols as well as their qualitative and quantitative composition and the concentration of the sterol esters have been determined in rape seed oil methyl ester samples by GC–FID. Prior to analysis, the free sterols were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane; betulinol was used as an internal standard. Calibration was performed by analysis of standard solutions containing β-sitosterol, cholesteryl stearate, and betulinol. The reproducibility of the quantitative results has been evaluated by repeated injections of the same test solution and by repeated complete analysis of the same sample.     

Perchlorate interchange during the redox process of PPy/PVS films in an acetonitrile medium. a voltammetric and EDX study

Polypyrrole/poly(vinyl sulfonate) (PPy/PVS) films in acetonitrile containing 0.1 M LiClO4 were studied by cyclic voltammetry. Consecutive voltammograms pointed to a continuous increase in the charge involved in the process, suggesting a rise in the number of the electroactive participants involved in the redox process. However, voltammograms obtained for the PPy/ClO4 films in analogous conditions pointed to a steady-state behavior from the very early cycles. Theoretical studies based on the Nernst and Butler-Volmer equations indicated that perchlorate ions are involved during the oxidation/reduction process of the PPy/PVS films when the steady state is reached. This result was confirmed by "ex situ" energy-dispersive X-ray analysis of the films. In this regard, the electrochemical behavior of PPy/PVS polymers was similar to that of PPy/ClO4 films when a high number of cycles were carried out. The exchange of ClO4- during the redox reaction of the PPy/PVS films made it necessary to incorporate Li+ cations inside the polymer during the initial voltammetric cycles to compensate for the negative charges of PVS polyanions. Li+ cations are mainly stabilized inside the polymer by the ion pairs formed with the sulfonated groups of the PVS. An increase and shift of the voltammetric cycles indicated a restructuring of the polymeric chains with consecutive scans.     

Permeation associated with three-phase-partitioning method on release of green fluorescent protein

Transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were subjected to two methods of extraction: (1) freezing/thawing/sonication (FTS) cycles prior to the three-phase partitioning (TPP) method, or (2) directly to TPP extraction. The amount of GFPuv released by the FTS plus TPP method varied: 374μg/mL (first cycle), 93–442 μg/mL (second cycle), 32–359 μg/mL (third cycle), 18–115 μg/mL (fourth cycle). The GFPuv yields by the second method (TPP only) were, 23–54 μg/mL for the first extract and 33–91 μg/mL for the second. The FTS plus TPP method released similar amounts of GFPuv to that extracted by TPP; and provided a better mixture elution through the hydrophobic interaction column: 13–63 μg/mL for FTS plus TPP methods, and 2.5–13 μg/mL for TPP. The results showed that although selective permeation is a more laborious methodology, it was more efficient for obtaining of GFPuv in relation to the direct extraction of the cells for TPP.     

Preparation of new monoanionic "scorpionate" ligands: synthesis and structural characterization of titanium(IV) complexes bearing this class of ligand

The preparation of new "scorpionate" ligands in the form of the lithium derivatives [(Li(bdmpzdta)(H(2)O))(4)] (1) [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], [Li(bdphpza)(H(2)O)(THF)] (2) [bdphpza = bis(3,5-diphenylpyrazol-1-yl)acetate], and [Li(bdphpzdta)(H(2)O)(THF)] (3) [bdphpzdta = bis(3,5-diphenylpyrazol-1-yl)dithioacetate] has been carried out. Furthermore, a series of titanium complexes has been prepared by reaction of TiCl(4)(THF)(2) with the lithium reagents [(Li(bdmpza)(H(2)O))(4)] (4) [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and 1. Under the appropriate experimental conditions neutral complexes, namely [TiCl(3)(kappa(3)-bdmpza)] (5), [TiCl(3)(kappa(3)-bdmpzdta)] (6), and [TiCl(2)(kappa(2)-bdmpzdta)(2)] (7), and cationic complexes, namely [TiCl(2)(THF)(kappa(3)-bdmpza)]Cl (8) and [TiCl(2)(THF)(kappa(3)-bdmpzdta)]Cl (9), were isolated. Complexes 8 and 9 undergo an interesting nucleophilic THF ring-opening reaction to give the corresponding alkoxide-containing species [TiCl(2)(kappa(3)-bdmpza)(O(CH(2))(4)Cl)] (10) and [TiCl(2)(kappa(3)-bdmpzdta)(O(CH(2))(4)Cl)] (11). A family of alkoxide-containing complexes of general formulas [TiCl(2)(kappa(3)-bdmpza)(OR)] [R = Me (12); R = Et (14); R = (i)Pr (16); R = (t)Bu (18)] and [TiCl(2)(kappa(3)-bdmpzdta)(OR)] [R = Me (13); R = Et (15); R = (i)Pr (17)] was also prepared. The structures of these complexes have been determined by spectroscopic methods, and in addition, the X-ray crystal structures of 3, 7, 10, and 11 were also established.     

Comparison of Si-O-C interfacial bonding of alcohols and aldehydes on Si(111) formed from dilute solution with ultraviolet irradiation

Aliphatic alcohols and aldehydes were reacted with the Si(111)-H surface to form Si-O-C interfacial bonds from dilute solution by using ultraviolet light. The resulting monolayers were characterized by using transmission infrared spectroscopy, spectroscopic ellipsometry, and contact angle measurements. The effect of different solvents on monolayer quality is presented. The best monolayers were formed from CH(2)Cl(2). The optimized monolayers were thoroughly characterized to determine the film structure and monolayer stability. The UV-promoted, alcohol-functionalized, and aldehyde-functionalized monolayers are of comparable quality to those previously prepared by other means. Although both molecules are tethered through a Si-O-C bond, the film reactivity is distinctly different with the aldehyde films being more chemically resistant. The differences in chemical reactivity, vibrational spectra, hydrophobicity, and ellipsometric thickness between the alcohol and aldehyde monolayers are attributed to a difference in molecular coverage and monolayer formation.     

The behaviour of micro-bitumen drops in aqueous clay environments

This study summarises the rheological behaviour of emulsion bitumen drops in the presence of aqueous solutions of de-ionised or process water (DIW or PW) containing montmorillonite clays (M) and/or calcium ions (Ca++). The presence of calcium ions and montmorillonite clays resulted in the plastic behaviour of bitumen drops. In a DIW+M+Ca++ system, increasing temperature and calcium ion concentration resulted in an increase in the number and degree of plastic bitumen drops. In the presence of considerable amounts of Ca++ ions and/or at higher experimental temperature, bitumen drops in a PW+M system exhibited no significant overall plasticity of their surfaces. Both calcium and sodium ions contained in process water compete with each other to occupy the montmorillonite clay surface. At the pH value of process water (pH congruent with8), increasing the temperature did not change the value of bitumen droplet zeta potential. Stability of bitumen-in-water emulsions at 22 degrees C showed that bitumen droplets coalesced upon contact in the DIW+M system. The addition of calcium ions (Ca++) led to the inhibition of coagulation and coalescence of bitumen droplets, which may indicate the formation of CaM aggregates at the bitumen-water interface.