On the stability and decomposition of η6-(2-lithiochlorobenzene)tricarbonylchromium(0)

The decomposition of η⁶-(2-lithiochlorobenzene)tricarbonylchromium(0) (I) was found to follow first order kinetics with k_dec  5.1 x 10^-3 min^-1 at 0°C, the half life of I being 136 min at 0°C. While this dependence strongly suggests intermediacy of η⁶-(benzyne)tricarbonylchromium, trapping experiments were successful in only low yield.     

Dihydroxy(4-thiomorpholinomethyl)benzoic acid: from molecular asymmetry to diode characteristics

One of the challenges in molecular electronics is to design molecules which can be used as functional units in electronic devices. The subject of our investigations is an asymmetrical molecule, dihydroxy(4-thiomorpholinomethyl)benzoic acid (TMBA), whose structural and electronic properties are characterized. The self-assembly behavior of TMBA on Au(111) surfaces resulting in highly ordered monolayers is obtained using scanning tunneling microscopy (STM). Furthermore, investigations on the electronic properties of the combined metal/molecule system reveal an orbital mediated tunneling process and tunneling decay constants for the carboxylic and thiomorpholino group. Thus, a diode-like character of TMBA is shown to be caused by intrinsic electronic properties of different molecular moieties.     

Protein biosensors based on biofunctionalized conical gold nanotubes

There is increasing interest in the concept of using nanopores as the sensing elements in biosensors. The nanopore most often used is the alpha-hemolysin protein channel, and the sensor consists of a single channel embedded within a lipid bilayer membrane. An ionic current is passed through the channel, and analyte species are detected as transient blocks in this current associated with translocation of the analyte through the channel-stochastic sensing. While this is an extremely promising sensing paradigm, it would be advantageous to eliminate the very fragile lipid bilayer membrane and perhaps to replace the biological nanopore with an abiotic equivalent. We describe here a new family of protein biosensors that are based on conically shaped gold nanotubes embedded within a mechanical and chemically robust polymeric membrane. While these sensors also function by passing an ion current through the nanotube, the sensing paradigm is different from the previous devices in that a transient change in the current is not observed. Instead, the protein analyte binds to a biochemical molecular-recognition agent at the mouth of the conical nanotube, resulting in complete blockage of the ion current. Three different molecular-recognition agents, and correspondingly three different protein analytes, were investigated: (i) biotin/streptavidin, (ii) protein-G/immunoglobulin, and (iii) an antibody to the protein ricin with ricin as the analyte.     

Linear solvation energy relationships of anionic dimeric surfactants in micellar electrokinetic chromatography I. Effect of the length of a hydrophobic spacer

The influence of the length of a flexible hydrophobic spacer on the selectivity of anionic dimeric surfactants was investigated. Disodium 1,omega-bis(decyloxymethyl)-dioxa alkane-1,omega disulfates with a spacer containing an ethylene, butylene, hexylene, octylene, decylene or dodecylene group were synthesized, and four of these were evaluated for use in micellar electrokinetic chromatography (MEKC) via linear solvation energy relationships (LSERs). There were no significant differences in the system constants of these surfactants, indicating that their micelles all have a very similar interface with the aqueous phase, regardless of the length of the hydrophobic spacer. Compared to sodium dodecylsulfate (SDS), these dimeric surfactants are slightly more cohesive, interact better with polarizable compounds, and are somewhat better hydrogen bond acceptors and worse hydrogen bond donors, while there is no difference in dipolarity. The critical micelle concentrations (CMCs) of these surfactants were in the order of 1mM, except for the dimeric surfactant with a spacer containing an ethylene group, which had a CMC <0.03 mM.     

Microanalytical method development for Fe, Cu and Zn determination in colorectal cancer cells

Microanalytical methods suitable for the determination of Fe, Cu in HT-29 (human colon adenocarcinoma) cells treated with different iron compounds (Fe(II) sulfate, Fe(III) chloride, Fe(III) citrate and Fe(III) transferrin) and cultured in medium supplemented or not with 10% (v/v) fetal calf serum (FCS) by total reflection X-ray fluorescence spectrometry (TXRF) and simultaneous graphite furnace atomic absorption spectrometry (GF-AAS) were developed. The developed TXRF method was also suitable for Zn determination in the samples. The main advantage of the proposed methods is the execution of all sample preparation steps following incubation and prior to the elemental analysis in the same Eppendorf tubes. Sample preparation was performed at microscale (115 μL sample volume) with 65% nitric acid and 30% hydrogen peroxide. According to scanning electron microscopic measurements, the organic matrix of the cell samples could be eliminated to the extent that accurate results were obtained for Cu and Fe by analyzing the same samples by TXRF and GF-AAS. Concerning the iron uptake, HT-29 cells incubated in FCS-free medium contained Fe in cca. 5-50 times higher amounts compared to cells cultured in FCS supplemented medium. Pronounced differences in the iron uptake compared to the iron supply (inorganic vs. organic chelated as well as iron(II) vs. iron(III)) were observed in the case of cell lines incubated in FCS-free medium.     

Magnetic and structural investigation of Mn(2+)-doped ZnSe semiconductor nanoparticles.

X-ray magnetic circular dichroism (XMCD) experiments on diluted magnetic semiconductor nanocrystals were carried out to study the local electronic structure and magnetic properties of Mn(2+) embedded in the lattice of ZnSe nanoparticles. It is shown that Mn(2+) is exclusively present in the bulk of ZnSe nanoparticles. Neither Mn-Mn coupling nor traces of oxidation to higher Mn oxidation states was observed. This result, which is consistent with EPR spectroscopic data, provides clear proof of the location of Mn(2+) in semiconductor nanoparticles. Further, it is shown that the magnetic ions are highly polarised inside the nanocrystals, where they reach about 50 % of the theoretical value of a pure d(5) state under identical conditions.     

Tensile strengths and Young’s modulus of thin copper and copper-nickel (CuNi44) substrates

In this paper we report a method to determine tensile strengths and Young’s modulus of cubic biaxial textured metal tapes used as substrate materials for coated conductors (CC). Simplicity, rapidity and reproducibility of the procedure are important for the evaluation of continuous in-house productions. Our approach is based on the EN 10002-1 B tensile test method. A key role for satisfactory results is the sample preparation of 100–250 μm thick tapes, which will be described in detail. Copper (E-Cu57) can be successfully transformed to cubic biaxial textured substrates. Best results were achieved by annealing between 750°C and 850°C in reducing atmosphere. Best FWHM values for the ψ scan are 5.51° and for the ϕ scan are 4.5°. Pole figure analysis verified the sharp {001} <100> texture of the tape. Vickers hardness measurements (HV 0.1) for the cold worked material yielded values of 135 and for the annealed tape, values of 37. The ultimate tensile yield strength Rm of the textured substrate is 150 MPa and thus significantly lower than that for the cold worked material (413 MPa). Cubic biaxial substrates could be manufactured from Isotan CuNi44 (WM49) bars. Best results were achieved by annealing at 1200°C in reducing atmosphere. Pole figure analysis verified the {001} <100> texture with other low intensity texture components. Vickers hardness measurements (HV 0.1) for the cold worked material yielded values of 236 and for the annealed tape values of 92. The ultimate tensile yield strength R _m of the textured substrate is 300 MPa and thus significantly lower than that for the cold worked material (723 MPa).      

Synthesis and Conformational Behavior of Rhodium(I) Metallohosts Derived from Diphenylglycoluril

The design and synthesis of molecules containing both a substrate-binding cavity and a nearby catalytically active metal center is a useful approach to the development of synthetic systems that function according to the principles of enzymes. To this end the receptor molecule 2a, derived from diphenylglycoluril, was functionalized with triaryl phosphite ligands to give the receptor ligand 2d. Exchange reactions of 2d with (diketonate)Rh(CO)(2), (diketone = acetylacetone, dibenzoylmethane, or dipivaloylmethane) led to the formation of the metallohosts 3a-c, respectively. The properties and conformational behavior of these metal complexes were studied by NMR techniques. Reaction of compounds 3 with H(2) in the presence of a small excess of additional triphenyl phosphite yields the rhodium(I) hydride complex 5. The metallohosts are capable of binding dihydroxybenzene guests in their cavities by hydrogen bonding and pi-pi stacking interactions. On binding a substrate the conformational behavior of hosts 3a-c was affected considerably.     

The first example of a liquid crystalline side-chain polymer with bent-core mesogenic units: ferroelectric switching and spontaneous achiral symmetry breaking in an achiral polymer

A dimethylsiloxane diluted polysiloxane side chain co-polymer with non-chiral banana-shaped mesogenic units shows an optically isotropic ferroelectric switching polar smectic C phase (SmCPF) consisting of a conglomerate of homogeneously chiral domains with opposite handedness.