Carrier-envelope phase stabilization with sub-10 as residual timing jitter

We demonstrate carrier-envelope phase (CEP) stabilization of a mode-locked Ti:sapphire oscillator with unprecedented timing jitter of eight attoseconds. The stabilization performance is obtained by a combination of two different stabilization approaches. In a first step the drift of the CEP is stabilized with a conventional feedback loop by means of controlling the oscillator pump power with an acousto-optic modulator (AOM). In a second step we utilize a recently developed feed-forward type stabilization scheme which has a much higher control bandwith. Here an acousto-optic frequency shifter (AOFS) produces the stabilized output in the first diffraction order. Moreover, we present numerical results on the optimization of the length of the photonic crystal fiber, which is used to generate an octave-spanning spectrum, in order to optimize the sensitivity in the f-to-2f interferometers.     

Modifications of interface chemistry of LSM-YSZ composite by ceria nanoparticles

A porous composite electrode LSM-YSZ (lanthanum strontium manganite and yttria stabilized zirconia) was impregnated with different amounts of SDC (samarium substituted ceria) nanoparticles. The materials were investigated with X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy to determine the microstructure, the interface chemistry and the surface chemistry of the various impregnated samples. The SDC nanoparticles cover the surface of the LSM-YSZ backbone to a large extent; they are approximately 5-20 nm in diameter and have a cubic crystal structure. Low concentrations of lanthanum and manganese originating from LSM were detected within SDC particles. It was also observed that the relative atomic concentration of strontium increased on the LSM-YSZ surface with increasing amount of SDC nanoparticles. These findings are related to the applied nanoparticle impregnation method. It is indicated that interactions between surfactant, nanoparticles, impregnation solution and the LSM-YSZ composite take place which can locally affect the surface and interface chemistry of the investigated materials.     

Analytical modelling of the in-plane compressive behaviour of pile fibres in Spacer Fabric Composites

The mechanical behaviour of Spacer Fabric Composites (SFC) is highly influenced by their pile fibres. Within this work, the in-plane compressive behaviour of pile fibres in SFC is investigated. An analytical model is developed based on rigid hinged struts. Therefore, a representative part of the continuous fibre is chosen. The bending behaviour and the interaction of the pile fibre with facesheet fibres is modelled using rotational and extension springs respectively. The system proposed is fully defined by three generalized coordinates. The total potential energy of the system is determined and used to obtain information about the deformation behaviour. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Application of nonlinear continuum dislocation theory to antiplane shear

We apply the nonlinear dislocation theory to the problem of antiplane constrained shear in a single crystal with one slip system. By taking dissipation into account, the relaxed energy functional has to be minimized. We show that, up to a threshold strain, no dislocations are nucleated and therefore the plastic slip is zero. Since this threshold value depends on the width of the specimen, a size effect takes place. The stress strain curve turns out to be a hysteresis loop exhibiting the work hardening due to the dislocation pile-up. It is shown that the Bauschinger effect holds true. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Forbidden Configurations and Product Constructions

A simple matrix is a (0,1)-matrix with no repeated columns. For a (0,1)-matrix F, we say that a (0,1)-matrix A has F as a configuration if there is a submatrix of A which is a row and column permutation of F (trace is the set system version of a configuration). Let \({\|A\|}\) denote the number of columns of A. We define \({{\rm forb}(m, F) = {\rm max}\{\|A\| \,:\, A}\) is m-rowed simple matrix and has no configuration F. We extend this to a family \({\mathcal{F} = \{F_1, F_2, \ldots , F_t\}}\) and define \({{\rm forb}(m, \mathcal{F}) = {\rm max}\{\|A\| \,:\, A}\) is m-rowed simple matrix and has no configuration \({F \in \mathcal{F}\}}\) . We consider products of matrices. Given an m ₁ × n ₁ matrix A and an m ₂ × n ₂ matrix B, we define the product A × B as the (m ₁ + m ₂) × n ₁ n ₂ matrix whose columns consist of all possible combinations obtained from placing a column of A on top of a column of B. Let I _k denote the k × k identity matrix, let \({I_k^{c}}\) denote the (0,1)-complement of I _k and let T _k denote the k × k upper triangular (0,1)-matrix with a 1 in position i, j if and only if i ≤ j. We show forb(m, {I ₂ × I ₂, T ₂ × T ₂}) is \({\Theta(m^{3/2})}\) while obtaining a linear bound when forbidding all 2-fold products of all 2 × 2 (0,1)-simple matrices. For two matrices F, P, where P is m-rowed, let \({f(F, P) = {\rm max}_{A} \{\|A\| \,:\,A}\) is m-rowed submatrix of P with no configuration F}. We establish f(I ₂ × I ₂, I _m/2 × I _m/2) is \({\Theta(m^{3/2})}\) whereas f(I ₂ × T ₂, I _m/2 × T _m/2) and f(T ₂ × T ₂, T _m/2 × T _m/2) are both \({\Theta(m)}\) . Additional results are obtained. One of the results requires extensive use of a computer program. We use the results on patterns due to Marcus and Tardos and generalizations due to Klazar and Marcus, Balogh, Bollobás and Morris.     

A comparison of quantitative nuclear magnetic resonance methods: internal,external, and electronic referencing

The performance of three quantitative NMR methods was compared in terms of short‐term and long‐term precision and accuracy, robustness, linear range, and general applicability. The Internal Reference method employs a reference material co‐dissolved with sample; the External Reference method employs a reference material contained in a separate solution; and the third method, known as Electronic REference To access In vivo Concentrations (ERETIC), employs an externally calibrated digital reference peak. The Internal Reference method results were the most precise and remained stable within 0.1% for at least 4 weeks. The results from the External Reference and ERETIC methods were practically equivalent to each other during this time. These methods exhibited small differences relative to the standard set by the Internal Reference method and slightly lower precision, establishing them as practical alternatives to the Internal Reference method. In contrast to the Internal Reference method, the External Reference and ERETIC methods possess several advantages that address peak overlap, flexibility of calibration, and duration of applicability. The study was designed such that each spectrum contained the information needed to compare the three methods while all other variables were kept constant. Applicability of pulse width compensation is addressed. ERETIC software compensation and minor adjustments to 90° pulse width were concluded to be unnecessary for this system. Although each of the methods was applied here to specifically calculate and compare chemical purity values, this evaluation applies generally to absolute quantitation by NMR. Copyright © 2013 John Wiley & Sons, Ltd.     

Short communication: Stille coupling reactions of functionalized triorganotin halides

Convenient conditions for the Stille coupling of halide‐bearing triorganotin compounds, which do not normally react under typical Stille reaction conditions, are presented. The coupling of vinylstannanes with allyl bromide using palladium(II) catalysis is accomplished under fluoride assistance to give the substituted 2,5‐hexadien‐1‐ols in Z‐configuration. Copyright © 2004 John Wiley & Sons, Ltd.     

Book review

Ernest R. Alexander Published by Gordon and Breach Publishers, Amsterdam, Holland 1995. 355 pages. ISBN 2-88449-173-2