Multinuclear magnetic resonance spectroscopy studies of the structuration of the tunnels of sepiolite in the presence of intracrystalline pyridine molecules

Sepiolite, a naturally occurring magnesiosilicate nanoporous clay mineral with a tunnel structure, contains two types of water molecules in the structure: zeolitic water trapped inside the tunnels and structural water molecules which interact strongly with magnesium cations. The zeolitic water was removed by heating the sepiolite to 120 degrees C. The partially dehydrated sepiolite absorbed pyridine vapor to produce an intercalated material where the pyridine takes the place of the zeolitic water. 1H solid-state MAS NMR spectroscopy showed that there is isotopic H/D exchange between pyridine-d5 and the remaining structural water molecules of the sepiolite framework. The exchange takes place at room temperature over several days. Wide line solid state 2H NMR of the sequestered pyridine-d5 showed that two populations of pyridine molecules coexist in the material: one very mobile physisorbed population, which can be removed by heating at 90 degrees C, and a population due to pyridine trapped in the tunnels. Except for small in-plane librations, the trapped pyridine was shown to be held rigidly by the sepiolite. When the pyridine intercalated material is heated at 400 degrees C the structural water and some of the pyridine is lost. The remaining pyridine takes the place of the structural water to produce a new inorganic-organic nanohybrid material with the pyridine bound to the terminal Mg(II) in the structure. The pyridine in this material as well as the intercalated material was characterized by slow-spinning 15N and 13C CP/MAS NMR spectroscopy. The 15N NMR was shown to be a very sensitive probe to characterize the various types of pyridine. The data indicate that pyridine molecules in the inorganic-organic nanohybrid material are directly bound to magnesium cations exposed in the tunnels of sepiolite.     

Application of a universal force field to mixed Fe/Mo-S/Se cubane and heterocubane clusters. 1. Substitution of sulfur by selenium in the series [Fe4X4(YCH3)4]2-; X = S/Se and Y = S/Se

A series of Fe-S and Fe-Se cubane clusters containing all four combinations of the general formula [Fe(4)X(4)(Y-CH(3))(4)](2)(-) (X = S/Se, Y = S/Se) is investigated with FTIR and Raman spectroscopy. The terminally selenolate coordinated clusters (Y = Se) are prepared by a new synthetic route. All four cluster compounds are structurally characterized by X-ray single-crystal structure determination. Infrared and Raman spectra of all compounds are presented and interpreted with normal coordinate analysis. The corresponding force fields are based on that developed for the Fe(4)S(4)-benzyl cluster (Czernuszewicz, R. S.; Macor, K. A.; Johnson, M. K.; Gewirth, A.; Spiro, T. G. J. Am.Chem. Soc. 1987, 109, 7178-7187). An empirical procedure is presented to convert Fe-S into Fe-Se force constants. Only minor changes in force constants are found upon S --> Se exchange, reflecting the similarity of the Fe-S and Fe-Se bonds. The drastic frequency shifts in the metal-ligand region observed upon substitution of sulfur by selenium are, therefore, primarily due to the corresponding mass changes.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.     

Die Kristallstrukturen von KNdTe4, RbPrTe4 und RbNdTe4 — Untersuchungen zur thermischen Stabilität von KNdTe4 sowie Bemerkungen zu einigen anderen Vertretern der Zusammensetzung ALnTe4 (A = K,Rb, Cs und Ln = Seltenerd‐Metall)

Crystal Structures of KNdTe₄, RbPrTe₄, and RbNdTe₄ — Investigations concerning the Thermal Stability of KNdTe₄ as well as some Remarks concerning Additional Representatives of the Composition ALnTe₄ (A = K, Rb, Cs and Ln = Rare Earth Metal) Of the compounds ALnQ₄ (A = Na, K, Rb, Cs; Ln = Lanthanoid; Q = S, Se and Te) the crystal structures of the three new tellurides KNdTe₄, RbPrTe₄ and RbNdTe₄ were determined by X‐ray single‐crystal structure analysis and of the three additional new ones KCeTe₄, KPrTe₄ and CsNdTe₄ by X‐ray powder diffraction experiments. All six new compounds are isotypic with KCeSe₄. Characteristic for the crystal structure of the compounds mentioned above are layers built from (Q₂)^2— dumbbells in form of 4.3².4.3 nets with embedded cations A⁺ and Ln³⁺ between them, which are coordinated eightfold in form of square‐shaped antiprisms by Q ions. The distances Te‐Te within the dumbbells were found to be 277.8(2) pm for all investigated tellurides. By combination of X‐ray diffraction and DTA measurements it was shown that the compound KNdTe₄ is metastable at ambient temperature with a limited existence range between the temperatures 260 and 498 °C.     

Cyclic PNA-based compound directed against HIV-1 TAR RNA: modelling, liquid-phase synthesis and TAR binding

A cyclic molecule including a hexameric PNA sequence has been designed and synthesized in order to target the TAR RNA loop of HIV-1 through the formation of a "kissing complex". For comparison, its linear analogue has also been investigated. The synthesis of the cyclic and linear PNA has been accomplished following a liquid-phase strategy using mixed PNA and fully N-protected (aminoethylglycinamide) fragments. The interactions of this cyclic PNA and its linear analogue with TAR RNA have been studied and the results indicate clearly that no interaction occurs between the cyclic antisense PNA and TAR RNA, whereas a tenuous interaction has been detected with its linear PNA analogue.     

Die chemie der schweren carben-analogen R2M,M = Si,Ge, Sn: IX. Eigenschaften und thermolyse von neuen 7-silabicyclo[2.2.1]heptadienen

Factors governing the ease and mechanism of 7-silabicyclo[2.2.1]heptadienes thermolysis in order to generate free silylenes and the corresponding benzene derivatives are investigated. For this purpose, 29 new compounds of the types VII–X have been prepared. No indications for a polar mechanism or an intermediate biradical could be found. The degradation is exactly of first order in all cases investigated sofar, and is enhanced by phenyl groups at the bridgehead C atoms, if a conformation coplanar with the basic ring is allowed by the neighbouring substituents, but is not enhanced by phenyl groups at the Si. The X-ray structure of two typical derivatives is discussed with this respect. A special mechanism is operating in the easy thermolysis of carbomethoxy-substituted compounds leading to cyclic sila enolether intermediates.     

From anisole to 1,2,4,5‐tetramethoxybenzene: Theoretical study of the factors that determine the conformation of methoxy groups on a benzene ring

Unhindered ortho‐dimethoxy‐substituted phenyl rings often display a coplanar conformation. A theoretical study of a series of methoxybenzenes consisting of methoxybenzene (anisole), the three dimethoxybenzenes, and 1,2,4,5‐tetramethoxybenzene, at the DFT/B3LYP/6‐311++G** level of theory, allows us to identify the factors influencing the conformational preference and attribute the coplanarity of such methoxy groups to mesomeric effects. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Sulfoalkyl Ether β-Cyclodextrin Derivatives: Synthesis and Characterizations

A series of sulfoalkyl ether -cyclodextrin derivatives, including sulfoethyl, sulfopropyl and sulfobutyl ethyl -cyclodextrins, have been synthesized and characterized. Each sulfoalkyl ether -cyclodextrin is a mixture of various degrees of substitution and different positional isotherms. Elemental analysis, ¹H NMR, MS, and Differential Scanning Calorimetry analysis were used to determine the average degree of substitution for each -cyclodextrin derivative. The average degrees of substitution are 3.4, 1.6 and 2.5 for sulfoethyl, sulfopropyl and sulfobutyl ether -cyclodextrin, respectively. The water solubility of these derivatives is substantially higher than that of -cyclodextrin. ¹H NMR indicates thatsulfoethyl ether -cyclodextrin may have major substitution on the secondaryhydroxyl group while the major substitution in sulfopropyl and sulfobutyl ether-cyclodextrin could be on the primary hydroxyl group. MS spectra showthat no more than one substitution occurred on a single glucose unit.     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002     

Novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues

A series of novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues 1a–e were synthesized in good yields and high optical purities (Schemes 1 and 2). The absolute configurations of these tyrosine analogues were unambiguously determined based on the X-ray structures of the precursor diastereoisomeric peptides of type 4 and 5 . Four of these structures are described (Figs. 1–4), showing β-turn type-I geometries for dipeptides 4a, 5b , and 4c and an extended conformation for peptide 5c (Table 3). The conversion of the free amino acids 1a–c into suitably protected building blocks 11a–d and 15d,e for peptide synthesis is discussed (Schemes 3 and 4).