Compact,wide aperture X-ray preionized XeCl laser with high specific optical power

An X-ray preionized, discharge-pumped XeCl laser with a variable beam cross-section of up to 6×6 cm² is described. It uses flat electrodes and the beam width is determined by X-ray collimation. Its operation characteristics concerning reduced electric field strength (E/p) and X-ray dose are discussed in detail. The inductance of the discharge loop is minimized using a water capacitor arrangement. A very high specific optical power (90 MW/l) is achieved in an active volume of 1.2 l. The pulse energy exceeds 5 J in a 45 ns pulse (FWHM). Komatsu Ltd., Manda 1200, Hiratsuka-shi, Kanagawa 254, Japan Institute of Optics and Fine Mechanics, Department of Plasma Physics, Academia Sinica, Shanghai, P.R. China     

Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.     

Enhancing calibration models for non-invasive near-infrared spectroscopical blood glucose determination

Partial least-squares regression (PLS) and radial basis function (RBF) networks are used to compute calibration models for non-invasive blood glucose determination by NIR diffuse reflectance spectroscopy. A model computation shows that even extremely small deviations of the spectra induce increased prediction errors. Since the spectral contribution of blood glucose is much smaller than deviations resulting from the non-invasive measuring process a method based on Pearson’s correlation coefficient can be used for evaluating the quality of the recorded spectra during the prediction step. Another method is based on the leverage values from the hat matrix of the RBF network. Both methods lead to a significant decrease in prediction error.     

Fe(CO)5 thin films adsorbed on Au(111) and on self-assembled organic monolayers: I. Structure

The adsorption of Fe(CO)(5) onto Au(111)/mica and C(4), C(8), C(12), and C(16) SAMs/Au(111)/mica surfaces has been studied using infrared spectroscopy to elucidate the coverage-dependent structures of these films and the intermolecular couplings that determine the form of the spectra. For all substrates, the first layer is composed of molecules physisorbed with one axial and two equatorial carbonyl groups directed toward the substrate; subsequent layers are preferentially oriented with the C(3) molecular axis aligned perpendicular to the substrate (i.e., one axial carbonyl group directed toward the substrate). The axial vibrational band systematically shifts to higher frequencies with increasing surface coverage because of the effects of intermolecular coupling of the quasiparallel transition dipole moments. The strong effects of dipolar coupling are also witnessed by the trends of the band positions when the distance to the image plane is systematically varied using highly organized self-assembled organic substrates; no band shifts are observed when dilute Fe(CO)(5) is embedded in Xe matrixes under identical experimental conditions. The as-deposited films are structurally stable below 125 K on Au(111)/mica surfaces and below 100 K on the organic self-assembled monolayers. The instability of the films above these temperatures demonstrates that the as-adsorbed films do not form thermodynamically well-defined phases but are structurally metastable. The results presented herein and in the companion paper provide a consistent framework to interpret the spectroscopy of these systems that resolves outstanding issues concerning these films and provides a structural model that explains the dynamic properties of these films during exposure to low-energy electron beams.     

Synthesis of some substituted 3-alkenyl-1-phenylpyrazoles

The regioselective synthesis of new 3-alkenyl-1-phenylpyrazoles 4 from the reaction of phenylhydrazine with 2,3-dihydro-4H-pyran-4-ones 1 is described.     

Synthetic applications of 2-chlorooxiranes: preparation of thiazoles,dihydrothiazoles and selenazoles

The reaction of 2-chlorooxiranes 1 with thioamides and thioureas provides access to thiazoles, 4-hydroxy-4,5-dihydrothiazoles and 2-imino-2,3-dihydrothiazoles under mild conditions and with excellent yields. With 1 and selenourea, near quantitative yields of selenazoles are obtained.     

Determination of zearalenone and ochratoxin A in soil

Mycotoxins are secondary metabolites, formed by the action of fungi on agricultural crops in the field or during storage. These metabolites are highly toxic to animals and humans and high levels have been measured in agricultural crops. In order to evaluate human risks due to ingestion of mycotoxin-contaminated food different methods have been developed for analysis of mycotoxins in cereals and maize. In this project the focus was on mycotoxins in agricultural soil and the fate of these toxins in the soil-water-plant system. Two different mycotoxins were selected in the study: zearalenone (ZON) produced by species of Fusariumor Aspergillusand ochratoxin A (OTA) produced by species of Penicillium. We developed a method for analysis of these toxins in soil. Soil samples were extracted with methanol-water (9:1) and purified by solid-phase extraction (SPE, C8-columns). The final extract was analysed using high-pressure liquid chromatography (HPLC) with fluorescence detection. A Phenyl Hexyl column was used to separate the toxins. The detection limits obtained were 0.1 and 1.0 microg kg(-1) dry weight (dw) for OTA and ZON, respectively. The developed method has been used for analysis of different soils in connection with growth chamber experiments. The soil types used in the growth chamber experiments were a sandy soil, a sandy clay soil, and a soil with high content of organic matter. The recovery was determined as 85.8 and 93.4% and the repeatability to 5.1 and 12.8% for OTA and ZON, respectively. The reproducibility obtained was 8.5 and 15.0% for soil samples, representing concentration levels from 0.2-30 microg kg(-1) dw (OTA) and from 1.0-100 microg kg(-1) dw (ZON).