Effect of pressure on coupled electronic ground and excited states determined from luminescence spectra of trans-dioxorhenium(V) complexes

Pressure-dependent luminescence spectra of trans-dioxo complexes of rhenium(V) with ancillary ethylenediamine ligands exhibit resolved vibronic structure in the O=Re=O symmetric stretching mode at room temperature. The intensity distribution within the vibronic progression changes with pressure, leading to band shapes that are also pressure-dependent. These spectroscopic features arise from coupled electronic states and depend on the energy differences between ground and excited states, which vary by 2500 cm(-1) for the three complexes with ethylenediamine, tetramethylethylenediamine, and tetraethylethylenediamine ancillary ligands. We describe the pressure-dependent vibronic structure and band shapes with anharmonic adiabatic potential energy surfaces for the ground states of all complexes. The calculated spectra reveal the pressure dependence of the energies of electronic origins, luminescence band maximums, offsets between ground- and emitting-state potential minimums, and vibrational frequencies. The largest pressure effects are observed where the coupled electronic states are close in energy.     

Synthesis of cyclopentane amide DNA (cpa-DNA) and its pairing properties

We recently reported on the synthesis and pairing properties of the DNA analogue bicyclo[3.2.1]amide DNA (bca-DNA). In this analogue the nucleobases are attached via a linear, 4-bond amide-linker to a structurally preorganized sugar-phosphate backbone unit. To define the importance of the degree of structural rigidity of the bca-backbone unit on the pairing properties, we designed the structurally simpler cyclopentane amide DNA (cpa-DNA), in which the bicyclo[3.2.1]-scaffold was reduced to a cyclopentane unit while the base-linker was left unchanged. Here we present a synthetic route to the enantiomerically pure cpa-DNA monomers and the corresponding phosphoramidites containing the bases A and T, starting from a known, achiral precursor in 9 and 12 steps, respectively. Fully modified oligodeoxynucleotides were synthesized by standard solid-phase oligonucleotide chemistry, and their base-pairing properties with complementary oligonucleotides of the DNA-, RNA-, bca-DNA-, and cpa-DNA-backbones were assessed by UV melting curves and CD-spectroscopic methods. We found that cpa-oligoadenylates form duplexes with complementary DNA that are less stable by -2.7 degrees C/mod. compared to DNA. The corresponding cpa-oligothymidylates do not participate in complementary base-pairing with any of the investigated backbone systems except with its own (homo-duplex). As its congener bca-DNA, cpa-DNA seems to prefer left-handed helical duplex structures with DNA or with itself as indicated by the CD spectra.     

Wechselwirkungen in Kristallen. 106. Mitteilung. Die Klaviatur der Na⊕-Koordinationszahlen in ihren Carbazolanion-Salzen

Interaction in Crystals: The Keyboard of Na⊕ Coordination Numbers in Its Carbazole Anion Salts Some local minima in the shallow potential of the system carbazole anion, sodium cation, and the ethers tetrahydrofuran, 1,2-dimethoxyethane, diglyme, triglyme, tetraglyme, 15-crown-5 as well as 2.2.1-cryptand are explored experimentally and by quantum-chemical calculations. Three prototype contact-ion multiples of Na⊕-solvated carbazole anion M? salts have been crystallized and structurally characterized: polyether-solvated monomers [M?Na⊕_solv]₁, solvent-shared dimers [M?Na⊕_solv]₂, and solvent-separated polyions [(M?)nNa?_solv](^n?1)? [Na⊕_solv](n_?1). The Na⊕ coordination numbers stretch from 3 to 7 as illustrated by the compounds [(M?)₃Na+]??[Na+(2.2.1-crytand)]₂ for 3 and 7, [(M?)₂Na+(THF)₂]? [Na⊕(2.2.1-cryptand)] for 4 and 7, [M? Na+(diglyme)]₂ for 5, or [M? Na+(l 5-crown-5)] for 6. Structural comparison is based on literature analogies as well as on results of MNDO calculations concerning charge distribution and enthalpies of formation. Taken together, the results demonstrate the delicate energy balance, by which cation solvation can influence the formation of organic salts.     

Solvent effects in microemulsion electrokinetic chromatography

The contribution of organic solvents to the mechanisms responsible for separation in microemulsion electrokinetic chromatography (MEEKC) is reviewed. Organic solvents are needed as constituents of microemulsions for a series of reasons. (i). A water-immiscible organic substance is used to form the actual oil phase of the microemulsion, (ii). a less hydrophobic solvent is commonly employed as a so-called co-surfactant, and (iii). in many cases an organic modifier is added to influence the solubility of the analytes in the aqueous phase of the microemulsion. All these organic solvents do not only participate in the separation in their actual function, but also interact with each other and the analytes. Variations in separation selectivities triggered by changes in the nature and/or concentration of these organic solvents present in microemulsions suitable for MEEKC are discussed in this work.     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

Transesterification of trialkyl phosphates from alkyl bromides

The treatment of trialkyl phosphate with different alkyl bromides provides facile access to mixed phosphate esters. The presence of substoichiometric amounts of lithium bromide was found to be critical to this transesterification process, supporting a mechanism involving initial generation of phosphate anion, followed by its nucleophilic attack on alkyl bromide.     

First enantioselective synthesis of (−)-neplanocin F

(−)-Neplanocin F, the natural isomer of a component of the neplanocin family was enantioselectively synthesized starting from d-γ-ribonolactone. The synthetic approach was based on the preparation of a suitable carbocyclic precursor bearing three hydroxyl groups orthogonally protected. The key steps of the synthesis were the regioselective protection of a secondary allylic alcohol over a homoallylic one and the coupling of the nucleobase with a triflate intermediate.     

Novel tocopheryl compounds XX. 1,3,8-Trioxaphenanthrenes derived from γ-tocopherol

Condensation of γ-tocopherol with aldehydes provides 2,4-disubstituted 1,3,8-trioxaphenanthrenes in a simple one-pot reaction. The reaction proceeded under acid catalysis according to a two-step alkylation-acetalisation mechanism in yields between 58 and 81%. The title compounds are precursors for the thermal generation of ortho-quinone methides, which can be in situ reduced to give antioxidants of the 5a-substituted α-tocopherol-type. The products were analytically characterized by NMR and HRMS.     

Biochemical reaction engineering for redox reactions

Redox reactions are still a challenge for biochemical engineers. A personal view for the development of this field is given. Cofactor regeneration was an obstacle for quite some time. The first technical breakthrough was achieved with the system formate/formate dehydrogenase for the regeneration of NADH2. In cases where the same enzyme could be used for chiral reduction as well as for cofactor regeneration, isopropanol as a hydrogen source proved to be beneficial. The coproduct (acetone) can be removed by pervaporation. Whole-cell reductions (often yeast reductions) can also be used. By proper biochemical reaction engineering, it is possible to apply these systems in a continuous way. By cloning a formate dehydrogenase and an oxidoreductase "designer bug" can be obtained where formate is used instead of glucose as the hydrogen source. Complex sequences of redox reactions can be established by pathway engineering with a focus on gene overexpression or with a focus on establishing non-natural pathways. The success of pathway engineering can be controlled by measuring cytosolic metabolite concentrations. The optimal exploitation of such systems calls for the integrated cooperation of classical and molecular biochemical engineering.     

Microanalytical investigations on optical phase gratings in K(TiO)PO4 single crystals

The Rb/K ion exchange in micro-structured K(TiO)PO₄ single crystals in contact with Rb containing nitrate melts results in ion-exchanged zones with enlarged refractive index which works as an optical phase grating. The knowledge of the diffusion behavior was the prerequisite for the generation of optimum refractive index profiles. Therefore, the local Rb/K concentration of ion-exchanged single crystals was determined with an electron probe microanalyzer (EPMA). The observed degree of ion exchange and the calculated Rb/K counterdiffusion coefficients were used to estimate the optimum ion exchange conditions. The diffusion-generated optical phase gratings show very narrow and deep ion-exchanged zones. The ratio of the ion penetration depths results in an extreme diffusion anisotropy D_Rb/K(c):D_Rb/K(b) ≈ 500:1.