Ethyl (4-N-acylaminopyridin-3-yl)glyoxylate and 5-azaisatin as new synthons for a route to various new polyheterocycles

From 4-N-protected-aminopyridines which were functionalized at their 3-position, 5-azaisatin and equivalent synthons where obtained. Via the use of the Pfitzinger reaction, these compounds provided an easy route to new and various polyheterocyclic compounds.     

From terminal alkynes directly to branched amines

The one-pot synthesis of several branched secondary aliphatic amines is described. Hydroamination of terminal alkynes with aliphatic primary amines in the presence of Cp₂Ti(η²-Me₃SiCCSiMe₃) gives the corresponding aldimines as intermediates. Reaction of these in situ produced aldimines with organolithium reagents (n-BuLi, PhLi) provides the α-branched amines in an easy way in upto 78% overall yield.     

Synthesis of a simplified bryostatin C-ring analogue that binds to the CRD2 of human PKC-alpha and construction of a novel BC-analogue by an unusual Julia olefination process

[structure: see text] The synthesis of two truncated bryostatin analogues 2 and 3 is described. High-field NMR measurements on the C-ring analogue 3 in C(2)H(3)CN containing 25% (2)H(2)O have shown that it binds to the CRD2 of human PKC-alpha at virtually the same position as phorbol-13-acetate (PA) and bryostatin 1 (1). NMR titration studies have also revealed that 3 binds to the CRD2 with a potency similar in magnitude to PA but much less potently than 1.     

Dérivés propargyliques,XII et dérivés de la décahydroquinoléine,II Alkynyl-4, alkényl-4 et alkyl-4-décahydroquinolinols-4 N-substitués

The authors describe the synthesis of decahydro-4-quinolinones and N-substituted 4-alkynyl-, 4-allyl- and 4-alkyldecahydro-4-quinolinols and discuss the stereochemical problems of this compounds.     

Multinuclear magnetic resonance spectroscopy studies of the structuration of the tunnels of sepiolite in the presence of intracrystalline pyridine molecules

Sepiolite, a naturally occurring magnesiosilicate nanoporous clay mineral with a tunnel structure, contains two types of water molecules in the structure: zeolitic water trapped inside the tunnels and structural water molecules which interact strongly with magnesium cations. The zeolitic water was removed by heating the sepiolite to 120 degrees C. The partially dehydrated sepiolite absorbed pyridine vapor to produce an intercalated material where the pyridine takes the place of the zeolitic water. 1H solid-state MAS NMR spectroscopy showed that there is isotopic H/D exchange between pyridine-d5 and the remaining structural water molecules of the sepiolite framework. The exchange takes place at room temperature over several days. Wide line solid state 2H NMR of the sequestered pyridine-d5 showed that two populations of pyridine molecules coexist in the material: one very mobile physisorbed population, which can be removed by heating at 90 degrees C, and a population due to pyridine trapped in the tunnels. Except for small in-plane librations, the trapped pyridine was shown to be held rigidly by the sepiolite. When the pyridine intercalated material is heated at 400 degrees C the structural water and some of the pyridine is lost. The remaining pyridine takes the place of the structural water to produce a new inorganic-organic nanohybrid material with the pyridine bound to the terminal Mg(II) in the structure. The pyridine in this material as well as the intercalated material was characterized by slow-spinning 15N and 13C CP/MAS NMR spectroscopy. The 15N NMR was shown to be a very sensitive probe to characterize the various types of pyridine. The data indicate that pyridine molecules in the inorganic-organic nanohybrid material are directly bound to magnesium cations exposed in the tunnels of sepiolite.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.     

Die Kristallstrukturen von KNdTe4, RbPrTe4 und RbNdTe4 — Untersuchungen zur thermischen Stabilität von KNdTe4 sowie Bemerkungen zu einigen anderen Vertretern der Zusammensetzung ALnTe4 (A = K,Rb, Cs und Ln = Seltenerd‐Metall)

Crystal Structures of KNdTe₄, RbPrTe₄, and RbNdTe₄ — Investigations concerning the Thermal Stability of KNdTe₄ as well as some Remarks concerning Additional Representatives of the Composition ALnTe₄ (A = K, Rb, Cs and Ln = Rare Earth Metal) Of the compounds ALnQ₄ (A = Na, K, Rb, Cs; Ln = Lanthanoid; Q = S, Se and Te) the crystal structures of the three new tellurides KNdTe₄, RbPrTe₄ and RbNdTe₄ were determined by X‐ray single‐crystal structure analysis and of the three additional new ones KCeTe₄, KPrTe₄ and CsNdTe₄ by X‐ray powder diffraction experiments. All six new compounds are isotypic with KCeSe₄. Characteristic for the crystal structure of the compounds mentioned above are layers built from (Q₂)^2— dumbbells in form of 4.3².4.3 nets with embedded cations A⁺ and Ln³⁺ between them, which are coordinated eightfold in form of square‐shaped antiprisms by Q ions. The distances Te‐Te within the dumbbells were found to be 277.8(2) pm for all investigated tellurides. By combination of X‐ray diffraction and DTA measurements it was shown that the compound KNdTe₄ is metastable at ambient temperature with a limited existence range between the temperatures 260 and 498 °C.     

Sulfoalkyl Ether β-Cyclodextrin Derivatives: Synthesis and Characterizations

A series of sulfoalkyl ether -cyclodextrin derivatives, including sulfoethyl, sulfopropyl and sulfobutyl ethyl -cyclodextrins, have been synthesized and characterized. Each sulfoalkyl ether -cyclodextrin is a mixture of various degrees of substitution and different positional isotherms. Elemental analysis, ¹H NMR, MS, and Differential Scanning Calorimetry analysis were used to determine the average degree of substitution for each -cyclodextrin derivative. The average degrees of substitution are 3.4, 1.6 and 2.5 for sulfoethyl, sulfopropyl and sulfobutyl ether -cyclodextrin, respectively. The water solubility of these derivatives is substantially higher than that of -cyclodextrin. ¹H NMR indicates thatsulfoethyl ether -cyclodextrin may have major substitution on the secondaryhydroxyl group while the major substitution in sulfopropyl and sulfobutyl ether-cyclodextrin could be on the primary hydroxyl group. MS spectra showthat no more than one substitution occurred on a single glucose unit.     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002     

Novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues

A series of novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues 1a–e were synthesized in good yields and high optical purities (Schemes 1 and 2). The absolute configurations of these tyrosine analogues were unambiguously determined based on the X-ray structures of the precursor diastereoisomeric peptides of type 4 and 5 . Four of these structures are described (Figs. 1–4), showing β-turn type-I geometries for dipeptides 4a, 5b , and 4c and an extended conformation for peptide 5c (Table 3). The conversion of the free amino acids 1a–c into suitably protected building blocks 11a–d and 15d,e for peptide synthesis is discussed (Schemes 3 and 4).