Beiträge zur Chemie des Phosphors. 111. 1,2-Dichlor-1,2-di-tert-butyldiphosphan

Contributions to the Chemistry of Phosphorus. 111. 1,2-Dichloro-1,2-di-tert-butyl-diphosphane The reaction of tri-tert-butyl-cyclotriphosphane, (t-BuP)₃, with phosphorus(V) chloride (molar ratio 1:2) leads to the title compound Cl(t-Bu)P? P(t-Bu)Cl ( 1 ), which is remarkably stable against disproportionation reactions. As the first 1,2-dichloro-1,2-diorganyldiphosphane, 1 has been isolated in a pure state and was thoroughly characterized. At room temperature, 1 exists in a mixture of the d,l and meso form (about 20:80). The mutual repulsion of the negative polarized Cl atoms and their preferred gauche arrangement to the free electron pairs of neighboured P atoms leads to a gauche-conformation of the lone electron pairs in the d,l- and to a trans-conformation in the meso-configuration.     

Sensitive HPLC-fluorometric and HPLC-MS determination of diarrhetic shellfish poisoning (SP)-toxins as 4-bromomethyl-7-methoxycoumarin esters

 Extracts containing the diarrhetic shellfish poisoning (DSP) toxins okadaic acid (OA), dinophysistoxin-2 (DTX₂), and dinophysistoxin-1 (DTX₁) were purified on a silica gel cartridge and derivatized with 4-bromomethyl-7 methoxycoumarin (BrMmc). After pre-column derivatization the BrMmc derivatives of the DSP toxins were directly injected into an HPLC system, isocratically eluted, and quantified by fluorescence detection. The signals of the esters showed good linearity in the fluorescence detector within the examined contamination range of 0.03 mg DSP/kg to 2.5 mg DSP/kg. The detection limits for the DSP toxins as 7-Mmc esters were 0.04 ng (corresponding to 0.05 mg DSP/kg). The chromatographic conditions allow to couple the HPLC device with mass spectrometry. The method was tested with various mussel tissue samples. Received: 14 December 1995/Revised: 26 January 1996/Accepted: 30 January 1996     

Topological study of intramolecular hydrogen bonding in beta-hydroxyethylperoxy radical and beta-hydroxyethoxy radical along its dissociation pathway

The presence of intramolecular hydrogen bond (IHB) in beta-hydroxyethylperoxy and beta-hydroxyethoxy radicals was investigated using the QTAIM topological study on UB3LYP/6-311++G(2d,2p) charge densities. Only one of the two conformers of beta-hydroxyethylperoxy radical which were previously considered to present IHB displays a bond critical point (BCP) associated to an IHB. Furthermore, the atomic energies and electron populations indicate no evidence of IHB in the second conformer. Nevertheless, very small differences in molecular energies were obtained using several one-step and multi-step methods (G3, G3B3) between both conformers. No BCP is found between the hydroxyl hydrogen and the oxygen in the most stable conformer or in the transition state for the dissociation path of beta-hydroxyethoxy radical. However, a BCP is formed in the last steps of this path, thereby yielding H-bonded products.     

THE USE OF LIQUID CHROMATOGRAPHY-MASS SPECTROMETRY TO MONITOR THE ALLOMERIZATION REACTIONS OF CHLOROPHYLL a and PHEOPHYTIN a:m IDENTIFICATION OF THE ALLOMERS OF PHEOPHYTIN a

Abstract— This paper reports a new method for monitoring the allomerization reactions of chlorophyll a and pheo-phytin a. Complex mixtures are generated from illuminating pure compounds and monitored using both diode array high-performance liquid chromatography (DAD-HPLC) and liquid chromatography-mass spectrometry (LC-MS). LC-MS allows molecular weight and fragment ion analysis of significant HPLC peaks. Five products of the degradation of chlorophyll a can be simultaneously detected in a mixture, namely the monohydroxy allomer, the methoxylactone allomer, pheophytin a and the two corresponding allomers of the pheophytin. It is demonstrated that more than one pathway must be involved in the in vitro photodegradation of chlorophyll a as shown by the simultaneous existence of several intermediates.     

Molecular recognition: comparative study of a tunable host-guest system by using a fluorescent model system and collision-induced dissociation mass spectrometry on dendrimers

Host-guest interactions between the periphery of adamantylurea-functionalized dendrimers (host) and ureido acetic acid derivatives (guest) were shown to be specific, strong and spatially well-defined. The binding becomes stronger when using phosphonic or sulfonic acid derivatives. In the present work we have quantified the binding constants for the host-guest interactions between two different host motifs and six different guest molecules. The host molecules, which resemble the periphery of a poly(propylene imine) dendrimer, have been fitted with an anthracene-based fluorescent probe. The two host motifs differ in terms of the length of the spacer between a tertiary amine and two ureido functionalities. The guest molecules all contain an acidic moiety (either a carboxylic acid, a phosphonic acid, or a sulfonic acid) and three of them also contain an ureido moiety capable of forming multiple hydrogen bonds to the hosts. The binding constants for all 12 host-guest complexes have been determined by using fluorescence titrations by monitoring the increase in fluorescence of the host upon protonation by the addition of the guest. The binding constants could be tuned by changing the design of the acidic part of the guest. The formation of hydrogen bonds gives, in all cases, higher association constants, demonstrating that the host is more than a proton sensor. The host with the longer spacer (propyl) shows higher association constants than the host with the shorter spacer (ethyl). The gain in association constants are higher when the urea function is added to the guests for the host with the longer spacer, indicating a better fit. Collision-induced dissociation mass spectrometry (CID-MS) is used to study the stability of the six motifs using the corresponding third generation dendrimer. A similar trend is found when the six different guests are compared.     

Configurational bias Monte Carlo simulation of phase segregation in block copolymer networks

Cross-linked block copolymers are used as adhesives in fiber-reinforced composite material manufactures for automotive applications. Good adhesion between the polymer matrix and fibers in the interphase region is required for the structural integrity of these materials. Experimental evidence indicates that superior adhesion is obtained when phase segregation occurs between the two matrix phase block copolymers. It is therefore desirable to predict the conditions under which phase segregation is expected to occur. Configurational bias Monte Carlo simulations of two-component, trifunctional block copolymer networks were carried out to investigate phase segregation in these materials. The effects of four principal parameters on phase segregation were examined: the weight fractions of the two components, the cross-link length, the connectivity of the network, and the ratio of the square-well interactions. The molecular simulation results confirmed trends observed in laboratory measurements.     

Sequentially photocleavable protecting groups in solid-phase synthesis

[reaction: see text] A sequential solid-phase peptide synthesis was developed using both photolabile linker and protecting groups. The chromatic sequential lability between a tert-butyl ketone-derived linker (sensitive to irradiation at 305 nm) and a nitroveratryloxycarbonyl (NVOC) group (sensitive at 360 nm) was exploited to prepare Leu-Enkephalin in a 55% overall yield. This new strategy allows the preparation of peptides in essentially neutral medium, by avoiding the use of common deprotection reagents such as trifluoroacetic acid or piperidine.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Anab initio investigation of Cu2Se and Cu4Se2

Summary Experimentally known copper selenium clusters show extraordinary geometrical features, especially short Cu-Cu distances. We report the first theoretical investigation of Cu₂Se and Cu₄Se₂. Various quantum chemical methods (SCF, MP2, CPF, CCSD, CCSD(T), LDF) are applied to determine the importance of dynamic electron correlation. We find that inclusion of correlation does not essentially change the electronic structure of the clusters but has a strong influence on geometries. To reduce the computational effort we apply effective core potentials (ECPs) in combination with small, but carefully optimized basis sets. The applicability of simple modellings of correlation energies for approximate inclusion of correlation effects in SCF geometry optimizations is tested.     

Review coupling of capillary electrochromatography to mass spectrometry

This review discusses the development of capillary electrochromatography (CEC) coupled to mass spectrometric (MS) detection over the last few years. Major topics addressed are instrumental setups employed and applications of this technology published in the recent literature. The instrumental section includes a discussion of the most commonly used interfaces for the hyphenation of CEC and MS as well as ionization techniques. Applications reviewed in this paper come from a variety of different fields such as the analysis of biomolecules like proteins, peptides, amino acids or carbohydrates, chiral separations or the analysis of pharmaceutical an their metabolites in a series of matrices.