Simple high-performance liquid chromatographic method for the determination of all seven vitamin B6-related compounds

A simple, sensitive, isocratic high-performance liquid chromatographic method has been developed for the separation of all seven vitamin B₆-related compounds. The separation is accomplished using an ODS column and a mobile phase of 0.15 M sodium dihydrogenphosphate, adjusted to pH 2.5 with perchloric acid. The concentration of the compounds is determined with a fluorescence detector (excitation, 290 nm; emission, 389 nm). Isopyridoxal is used as an internal standard. The fluorescence intensity of pyridoxal-5′-phosphate is enhanced by post-column derivatization with sodium bisulfite. All seven compounds are separated in less than 20 min at a flow-rate of 1 ml/min. Applications of this method to yeast cell-free culture media, baker's yeast extract, egg and milk are presented.     

Guest sorption and desorption in the metal-organic framework [Co(INA)(2)] (INA=isonicotinate)--evidence of intermediate phases during desorption

The metal-organic framework [Co(INA)(2)]x0.5EtOH (INA = isonicotinate, NC(5)H(4)-4-CO(2)(-)), was synthesised under solvothermal conditions. Its X-ray crystal structure shows channels containing ethanol guests which are hydrogen-bonded to carboxylate oxygens of the framework. The pyridyl rings of the framework alternate between 'open' and 'closed' positions along the channels resulting in large variation in the channel cross-sectional area from ca. 1.4 by 2.3 A at the narrowest point to 4.9 by 5.3 A at the widest. Despite the very small windows, the ethanol guests (of van der Waals diameter ca. 4.2-6.1 A) may be reversibly desorbed and sorbed into the structure quantitatively, as shown by in situ variable-temperture IR spectroscopy and XRPD. The single-crystal structure of the desolvated form [Co(INA)(2)] shows that there is no change in the overall connectivity on desolvation, but the rotational positions of the pyridine rings are altered. This suggests that pyridyl rotation may occur to allow guests to pass in and out. When the synthesis was conducted in 1-propanol solvent [Co(INA)(2)]x0.5Pr(n)OHxH(2)O, was obtained, and a single-crystal X-ray structure revealed the same overall connectivity as in but with pyridine rings disordered over closed and open positions. There was no evidence of included guests from X-ray crystallography, suggesting that they are also highly disordered. Variable-temperature XRPD performed on bulk samples showed peaks which were unsymmetrical and exhibited shoulders, suggesting that for each pattern obtained the material actually consisted of several closely-related phases. The movements of the peaks during desolvation showed the presence of intermediate phases before the final desolvated product was formed. The peak positions of the intermediate phases matched more closely with the calculated pattern for than with or, suggesting that they may have disordered structures similar to. The results also suggest that the intermediate phase represents an initial increase in volume before a larger decrease in volume occurs to give the final desolvated material.     

Estimating entropies from molecular dynamics simulations

While the determination of free-energy differences by MD simulation has become a standard procedure for which many techniques have been developed, total entropies and entropy differences are still hardly ever computed. An overview of techniques to determine entropy differences is given, and the accuracy and convergence behavior of five methods based on thermodynamic integration and perturbation techniques was evaluated using liquid water as a test system. Reasonably accurate entropy differences are obtained through thermodynamic integration in which many copies of a solute are desolvated. When only one solute molecule is involved, only two methods seem to yield useful results, the calculation of solute-solvent entropy through thermodynamic integration, and the calculation of solvation entropy through the temperature derivative of the corresponding free-energy difference. One-step perturbation methods seem unsuitable to obtain entropy estimates.     

Morphological and chemical characteristics of airborne tungsten particles of Fallon, Nevada.

Morphological and chemical characteristics were determined for airborne tungsten particles in Fallon, Nevada, a town that is distinguishable environmentally by elevated airborne tungsten and cobalt. From samples of airborne dust collected previously at six different places in Fallon, tungsten-rich dust particles were isolated and analyzed with automated electron microprobe and wavelength-dispersive spectrometry. Representative W particles were further analyzed using transmission electron microscopy. Morphologically, Fallon W particles are angular and small, with minimum and maximum sizes of < or = 1 microm and 5.9 microm in diameter, respectively. The number and size of tungsten-rich particles decrease in Fallon with distance from a hard-metal facility located near the center of town. Chemically, Fallon airborne W particles include mixtures of tungsten with cobalt plus other metals such as chromium, iron, and copper. No W-rich particles were identifiable as CaWO4 (scheelite) or MnWO4 (huebnerite). From d-spacings, Fallon particles are most consistent with identification as tungsten carbide. Based on these multiple lines of evidence, airborne W particles in Fallon are anthropogenic in origin, not natural. The hard-metal facility in Fallon processes finely powdered W and W-Co, and further investigation using tracer particles is recommended to definitively identify the source of Fallon's airborne tungsten.     

Synthesis of homoceramides, novel ceramide analogues, and their lack of effect on the growth of hippocampal neurons

The synthesis of a new series of D-erythro-homoceramide analogues is described. Several synthetic approaches were investigated. Homoceramides can be successfully synthesized from L-homoserine as chiral building block and a protected Weinreb-amide as a key intermediate. The synthesis of short-chain analogues with a heptyl side chain, as well as with a phenyl residue in the sphingoid part (instead of the naturally occurring tridecyl side chain), was effected. The homoceramides 15-17 and 24 were investigated for their potential to reverse the inhibitory effect of fumonisin B(1) on axonal growth. Unfortunately, none of the tested compounds showed any biological activity due to their lack of metabolism to glucosylhomoceramide.     

Influence of conjugated nitrogenous bases on the spectra and structure of mixed-ligand nickel(II) chelates containing β-diones

The infrared and electronic excitation spectra of a series of new nickel(II) chelates containing an-diimine (or nitrogenous base, enR) and the anion of a-dione (1,3-ketoenol or 1,3-ketoester,H) were obtained in the solid state and in solution. The composition and the overall structure of the new chelates in the solid state depends on ligand concentration, the substituents within the-dionato moiety and the counterion present. The IR and electronic excitation spectra of [Ni(enR)₂ ]NO₃ and [Ni(enR)(O₂NO)] indicate, in conjunction with other physicochemical measurements, bidentate coordination of the ligands, while the spectral shifts reveal replacement of the (O,O)nitrato group by basic solvents. The existence of the nickel(II) in an octahedral environment is confirmed by an X-ray structure analysis of [Ni(dpamH)₂acac]NO₃ · CH₃OH (monoclinic, space groupP2_l/n, a=17.296(1),b=7.462(1),c=21.604(3) å,=95.65(1),Z=4, R=0.0534,Rw=0.0600), where dpamH denotes the 2,2-dipyridylamine.     

Metal-Enhanced S(2) Fluorescence from Azulene

In this paper, we report the first observation of metal-enhanced S(2) emission at room and low temperature (77K). The S(2) emission intensity of Azulene is enhanced by close proximity to Silver island films (SiFs). In this regard, a ≈ 2-fold higher S(2) fluorescence intensity of Azulene was observed from SiFs as compared to a glass control sample. This suggests that S(2) excited states can couple to surface plasmons and enhance S(2) fluorescence yields, a helpful observation in our understanding the interactions between plasmons and lumophores, and our continued efforts to develop a unified plasmon-lumophore/fluorophore theory.     

Preparation and dilute solution properties of model gemini nonionic surfactants

Dimeric poly(ethylene oxide) surfactants (or nonionic gemini surfactants) with the structure (Cn-2H2n-3CHCH2O(CH2CH2O)mH)2(CH2)6 (or GemnEm), where n is the alkyl length and m is the average number of ethylene oxides per head group, were synthesized. Surfactants were synthesized with alkyl chain lengths n = 12, 14, and 20 and m = 5, 10, 15, 20, and 30. Water solubilities and cloud temperatures at 1 wt% were determined by measuring turbidity as a function of temperature. Cloud temperatures increase with m and decrease with n, as observed for conventional surfactants. For large m the cloud temperatures were all above 100 degrees C. Surfactants with small m (i.e., n = 12, 14, m = 5 and n = 20, m = 10) were insoluble at room temperature, forming two-phase mixtures. Critical micelle concentrations (CMCs) were measured using a pyrene fluorescence method and are all in the range of 10(-7) to 10(-6) M, with the lowest values from the surfactants with large n and small m. CMCs of mixtures with both anionic and nonionic conventional (monomeric) surfactants were well described by an ideal mixing model.     

Development of combinatorial chemistry methods for coatings: high-throughput adhesion evaluation and scale-up of combinatorial leads

Coupling of combinatorial chemistry methods with high-throughput (HT) performance testing and measurements of resulting properties has provided a powerful set of tools for the 10-fold accelerated discovery of new high-performance coating materials for automotive applications. Our approach replaces labor-intensive steps with automated systems for evaluation of adhesion of 8 x 6 arrays of coating elements that are discretely deposited on a single 9 x 12 cm plastic substrate. Performance of coatings is evaluated with respect to their resistance to adhesion loss, because this parameter is one of the primary considerations in end-use automotive applications. Our HT adhesion evaluation provides previously unavailable capabilities of high speed and reproducibility of testing by using a robotic automation, an expanded range of types of tested coatings by using the coating tagging strategy, and an improved quantitation by using high signal-to-noise automatic imaging. Upon testing, the coatings undergo changes that are impossible to quantitatively predict using existing knowledge. Using our HT methodology, we have developed several coatings leads. These HT screening results for the best coating compositions have been validated on the traditional scales of coating formulation and adhesion loss testing. These validation results have confirmed the superb performance of combinatorially developed coatings over conventional coatings on the traditional scale.