Extraction of zirconium and hafnium thiocyanate with polyurethane foam

Conditions for the extraction of zirconium and hafnium thiocyanate by polyether-type polyurethane foam were studied in detail. The composition of the extractable species was found to be dependent on both the thiocyanate and metal-ion concentrations. The extraction efficiency for zirconium and hafnium depended on the size of the counter-cation as well as on the type of anion.     

The microscopic visualisation of the sonocrystallisation of ice using a novel ultrasonic cold stage

This work reports dynamic video images of the influence of ultrasonic cavitation on the sonocrystallisation of ice at a microscopic level. This has been achieved through the construction of a unique ultrasonic system for an optical microscope. The system consists of (1). an ultrasonic cold stage, (2). a temperature control system, and (3). a microscope and imaging setup. This allows the temperature of a sample to be systematically controlled while it is subjected to simultaneous excitation with alternating pressures in the ultrasonic frequency range. Both the amplitude of excitation and the frequency can be varied. Experiments on ice crystals in pure water and sucrose solutions were conducted. Three distinct phenomena were observed. Firstly, there is a tendency for cavitation bubbles to form at the grain boundaries between ice crystals. Secondly, there is a progressive melting of ice by cavitation bubbles which appear to eat their way into the ice phase. Thirdly, the dendritic ice structures may fragment under the influence of ultrasound, thus increasing the number of nuclei which may subsequently grow (secondary nucleation). These observations form the basis of a significantly enhanced understanding and exploitation of the sonocrystallisation of ice.     

Counting derangements, involutions and unimodal elements in the wreath product Cr ? Sn

We count derangements, involutions and unimodal elements in the wreath product C _r ≀ S _n by the numbers of excedances, fixed points and 2-cycles. Properties of the generating functions, including combinatorial formulas, recurrence relations and real-rootedness are studied. The results obtained specialize to those on the symmetric group S _n and on the hyperoctahedral group B _n when r = 1, 2, respectively.     

Echo-Planar Imaging of Porous Media with Spatial Resolution below 100 μm

A modified version of the echo-planar imaging technique incorporating a Carr–Purcell train of 180° rf pulses (PEPI) has been implemented on a standard spectrometer. It is demonstrated that artifacts in the image due to cumulative errors in the rf field can be reduced by replacing each 180° pulse by a composite sequence of three rf pulses. Artifact-free 3D images at 94 μm voxel resolution are obtained within 15 min. This technique has been applied to study the drying process in an initially water-saturated model porous medium with characteristicT^*₂of order 700 μs.     

Density functional theory analysis of a mixed‐ligand iridium compound for multi‐color organic light‐emitting diodes

Electronic states and their energies are calculated for a mixed‐ligand Ir(III) compound, (5‐chloro‐8‐hydroxyquinoline) bis(2‐phenylpyridyl) iridium (called IrQ(ppy)₂‐5Cl) using time‐dependent density functional theory (TDDFT) calculations and are compared with the experimental result. A good agreement is obtained between the calculated and measured absorption spectra. The d‐π_Q* molecular orbital transition gives the lowest‐energy triplet state absorption band. Its energy is estimated as 1.84 eV (671 nm), which is close to the absorption band position of 1.86 eV (666 nm) observed for IrQ(ppy)₂‐5Cl doped in 4,4′‐N,N′‐dicarbazole‐biphenyl (CBP) host and of 1.88 eV (660 nm) observed for IrQ(ppy)₂‐5Cl doped in polystyrene (PS). The second triplet state absorption band is caused by d‐π_ppy transition. Its position is calculated as 2.51 eV (494 nm). The dipole moment is estimated as 3.45 D, which is lower than the dipole moment of fac‐Ir(ppy)₃. This is understood by a reduced charge transfer between Ir(III) and quinoline ligand. Copyright © 2008 John Wiley & Sons, Ltd.     

Numerical Study on Depinning Dynamics of Fluids Interacting with Disorder

We investigate the depinning of two-dlmensional fluids interacting with quenched disorder, based on Langevin simulations. For weak disorder the fluids depin elastically and flow in an ordered state. A power-law scaling fit between velocity and driving force can be obtained for the onset of motion in the elastic regime. This is in good agreement with that of colloid, charge density wave, and superconducting vortex systems. With an increasing strength of the disorder, we find a sharp crossover to plastic depinning, accompanied by a substantial increase in the depinning force. The scaling fit obtained in the elastic regime becomes invalid when plastic flow occurs. In the plastic regime, the fluids flow in channels and the hexatic order decays exponentially with drives.     

Catalytic Chemosensing Assay for Selective Detection of Methyl Parathion Organophosphate Pesticide

Herein, a catalytic chemosensing assay (CCA), based on a bimetallic complex, [Ru^II(bpy)₂(CN)₂]₂(Cu^II)₂ (bpy=2,2′-bipyridine), is described. This complex integrates a task-specific catalyst (Cu^I-catalyst) and a signaling unit ([Ru^II(bpy)₂(CN)₂]) to specifically hydrolyze methyl parathion, a highly toxic organophosphate (OP) pesticide. The bimetallic complex catalyzed the hydrolysis of the phosphate ester to generate o,o-dimethyl thiophosphate (DTP) anion and 4-nitrophenolate. Intrinsically, 4-nitrophenolate absorbed UV/Vis light at λ_max=400 nm, creating the first level of the chemosensing signal. DTP interacted with the original complex to displace the chromophore, [Ru^II(bpy)₂(CN)₂], which was monitored by spectrofluorometry; this was classified as the second level of chemosensing signal. By integrating both spectroscopic and spectrofluorometric signals with a simple AND logic gate, only methyl parathion was able to provide a positive response. Other aromatic and aliphatic OP pesticides (diazinon, fenthion, meviphos, terbufos, and phosalone) and 4-nitrophenyl acetate provided negative responses. Furthermore, owing to the metal-catalyzed hydrolysis of methyl parathion, the CCA system led to the detoxification of the pesticide. The CCA system also demonstrated its catalytic chemosensing properties in the detection of methyl parathion in real samples, including tap water, river water, and underground water.     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).     

Room temperature suzuki cross‐coupling polymerizations of aryl dihalides and aryldiboronic acid/acid esters with t‐Bu3P‐coordinated 2‐phenylaniline‐based palladacycle complex as the precatalyst

Room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters with t‐Bu₃P‐coordinated 2‐phenylaniline‐based palladacycle complex, [2′‐(amino‐kN)[1,1′‐biphenyl]‐2‐yl‐kC]chloro(tri‐t‐butylphosphine)palladium, as a general precatalyst is described. Such room temperature Suzuki cross‐coupling polymerization is achieved by employing six equivalents or more of the base and affords polymers within an hour, with the yields and the molecular weights in general comparable to or higher than reported results that required higher reaction temperature and/or longer polymerization time. Our study provides a general catalyst system for the room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters and paves the road for the investigation of employing other monodentate ligand‐coordinated palladacycle complexes including other electron‐rich monophosphine‐coordinated ones for room temperature cross‐coupling polymerizations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1606–1611