Continuous-time photon-stimulated desorption spectroscopy studies on soft x-ray-induced reactions of CF3Br adsorbed on Si(111)-7×7

Continuous-time core-level photon-stimulated desorption (PSD) spectroscopy was used to study the soft x-ray-induced reactions of CF(3)Br molecules adsorbed on Si(111)-7×7 near the Si(2p) edge (98-110 eV). The monochromatic synchrotron radiation was employed as a soft x-ray light source in the photon-induced reactions and also as a probe for investigating the produced fluorination states of the bonding surface Si atom in the positive-ion PSD spectroscopy. Several different surface coverages were investigated. The PSD spectra from the low-CF(3)Br-covered surfaces show the production of surface SiF species, while those from the high-CF(3)Br-covered surfaces depict the formation of surface SiF, SiF(2), and SiF(3) species. The photolysis cross section of the submonolayer CF(3)Br-covered surface is determined as ～4.3×10(-18) cm(2). A comparison with the results on CF(3)Cl/Si(111)-7×7 surface is discussed.     

Effects of amorphous poly(vinyl acetate) on crystalline morphology of poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid)

The amorphous and crystalline phase behavior, spherulite morphology, and interactions between amorphous poly(vinyl acetate) (PVAc) and poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) were examined using differential scanning calorimetry, polarized-light optical and scanning electron, atomic-force microscopy (DSC, POM, SEM, AFM), and small-angle X-ray scattering (SAXS). The PHBV/PVAc blend was found to be miscible with an almost linear T _g-composition relationship, indicating perfect homogeneity. Interaction parameter by melting point depression is a negative value of χ = −0.32, suggesting quite favorable interaction strength. With the intimate interaction between the amorphous PVAc and crystalline PHBV polymers, effects of PVAc on the spherulitic morphology of PHBV are quite significant. Owing to the higher T _g of PVAc (than that of PHBV), the spherulite growth rate of PHBV was depressed by increasing PVAc content in blends. Neat PHBV exhibits ring-banded spherulites when crystallized at T_c = 60 ~ 110^° C {T_{\rm{c}}} = {6}0\sim {11}0^\circ {\hbox{C}} ; however, with increasing PVAc content in the blends, the temperature range at which the PHBV/PVAc blends exhibit ring-banded spherulites remains similar but the regularity increases, and the inter-ring spacing significantly decreases. In addition, the spherulite size and ring-band patterns therein are strongly dependent on T _max (190 vs. 220 °C, respectively, for erasing prior nuclei), from which the blends were quenched to a T _c (60–110 °C) for crystallization. For PHBV/PVAc blends crystallized at the same T _c from different T _max, higher T _max tends to erase nuclei, leading to larger spherulites. However, such larger spherulites owing to higher T _max are not necessarily packed with thicker lamellae.     

Reactivity of 3d transition metal cations in diethylene glycol solutions. Synthesis of transition metal ferrites with the structure of discrete nanoparticles complexed with long-chain carboxylate anions

Study of the reactivity of 3d transition metal cations in diethylene glycol solutions revealed several key features that made it possible to develop a new method for synthesis of the nanocrystalline transition metal ferrites. The 3-7 nm particles of [MFe2O4]n[O2CR]m, where M = Mn, Fe, Co, Ni, and Zn, ligated on their surface with long-chain carboxylate anions, have been obtained in an isolated yield of 75-90%. The key features are the following. Complexation of the first-row transition metal cations with diethylene glycol at a presence of alkaline hydroxide is sufficient to enable control over the rate of their hydrolysis. The reaction of hydrolysis leads to the formation of metal oxide nanocrystals in colloidal solution. The nanoparticles growth is terminated by an added long-chain carboxylic acid, which binds to their surface and acts as a capping ligand. The isolated nanocrystalline powders are stable against agglomeration and highly soluble in nonpolar organic solvents.     

2,7-Bis(1H-pyrrol-2-yl)ethynyl-1,8-naphthyridine: an ultrasensitive fluorescent probe for glucopyranoside

[structure: see text] A push-pull conjugated molecule, 2,7-bis(1H-pyrrol-2-yl)ethynyl-1,8-naphthyridine (BPN), has been designed to bind selectively with octyl glucopyranoside (OGU). The BPN/OGU quadruple hydrogen-bonding complex adopts a rigid BPN conformation in which the proton donor (d) and acceptor (a) relays (daad) are resonantly conjugated through the ethynyl bridge, inducing pi-electron delocalization, i.e., a charge transfer effect. The excellent photophysical properties make BPN a highly sensitive probe for monitoring glucopyranoside to a detection limit of approximately 100 pM.     

INAA determination of major and trace elements in loess,paleosol and precipitation layers in a pleistocene Loess Section,China

Instrumental neutron activation analysis was used for the determination of 31 major and trace elements in 32 samples from the Xinji Loess Section, Shaanxi Province, China. Interferences, including those from uranium fission products, were evaluated and corrections applied where necessary. The 39.7-meter deep section comprises of Lishi Loess of the middle Pleistocene (Q₂) and Malan Loess of the late Pleistocene (Q₃). The section is characterized by the presence of 5 layers of paleosol, and each paleosol is underlain by a precipitation layer. When the elemental abundances are converted to a carbonate-free basis, there is little compositional difference among the carbonate-free fractions of loess, paleosol and precipitation layers. This indicates that dissolution of carbonate minerals by downward-moving surface water was an important process in paleosol formation while other minerals were not severely weathered and elemental fractionation was minimal. The parent materials of the paleosol and precipitation layers closely resemble the loess layers in their elemental abundances, which suggests that all layers in the section have a compositionally similar source.     

三辛基氧化膦(TOPO)萃取铟的研究

本文研究了三辛基氧化膦(TOPO)自盐酸溶液中萃取铟的性能,其萃取率是随酸度的增加而增加。与P_(350)和TBP相比较,萃取能力大小顺序为:TOPO>P_(350)>TBP经斜率法和化学分析法研究确定,TOPO白盐酸溶液中萃取铟的反应为:In_((a))~(3+)+H_((a))~++4Cl_((a))~-+2TOPO_((o))F(?)HInCl_4·2TOPO_((o))IR和NMR研究证明:铟是以H[InCl_4]形式被萃入TOPO有机相中的。     

Indo-Mo Model with s·p Separation

A newly developed self-consistent-field molecular orbital theory is described and tested. The intermediate neglect of differential overlap (INDO) approximation is used, and all interaction integrals are differentiated according to their dependence upon 2s and 2p AO's. The bonding parameter β_l is reformulated so that the model is calibrated to only one specific molecular property, namely, the ionization energy of Hi. We expect that this model will not be biased toward any special families of molecules.     

Speciation of bound and free metals evaluated for lobster digestive gland extracts

A simple method is described for the speciation of metalions in biological extracts with a short desalting gel-filtration column. The system was optimized for the eluent and gel type to provide accurate free metal ion levels and minimum processing times. The four separation media studied were Sephadex G25, Bio-Gel P-6DG, controlled pore glass CPG40, and Fractogel HW40F. The best medium was the Fractogel HW40F because it was not compressible and allowed a pump to be used to obtain uniform flow rates. The eluent was 0.10 M ammonium acetate/0.01 M citric acid adjusted to pH 7.0. This eluent minimized ion/gel interactions and gave a lower salt content relative to other possible eluents. The separation time was 10 min per sample per metal ion of interest. The detection limits relative to the mass of wet tissue for the column/flame spectrometer system were 0.80 μg g^?1, 0.80 μg g^?1, and 1.6 μg g^?1 for zinc, cadmium and copper, respectively. The method is evaluated for a lobster digestive gland extract; the methodology should be applicable to other systems containing nonlabile metal species.     

Novel Rearrangements of 2,3-Dimercapto-1-propanol Derivatives: Formation of Dialkyl Sulfide, Dialkyl Disulfide, and 1,2,3-Tris(alkylthio)propane

The base alkylation of 2,3-dimercapto-1-propanol with alkyl halides leads in good yield to 2,3-bis(alkylthio)-1-propanol and dialkyl sulfide. The reaction of 2,3-bis(alkylthio)-1-propanol with catalytic concentrated sulfuric acid proceeds with rearrangement to give 1,2,3-tris(alkylthio)propane and dialkyl disulfide. The rearrangement reaction takes place through a common intermediate thiaranium intermediate 8.