Speciation Analysis of Inorganic Tin (Sn(II)/Sn(IV)) by Graphite Furnace Atomic Absorption Spectrometry Following Ion-Exchange Separation

A new method based on anion exchange resin separation and graphite furnace atomic absorption spectrometry (GFAAS) detection is proposed for the determination of inorganic tin species. The result showed that Sn(IV) was quantitatively retained on the resin when [HCl] = 9.0 mol · L⁻¹, but Sn(II) could not be adsorbed on the resin under the same condition. Thus, a separation of Sn(II) and Sn(IV) has been realized. When the concentration of NaOH solution was between 2.0–7.0 mol · L⁻¹, Sn(IV) that adsorbed on the resin could be eluated from the resin completely. Meanwhile, under the atmosphere and the nitrogen states, the translation between Sn(II) and Sn(IV) was investigated. Under the optimal conditions, the detection limit of Sn(IV) is 0.40 μg · L⁻¹ with RSD of 2.3% (n = 5, c = 2.0 μg · L⁻¹). The proposed method was applied to the speciation analysis of tin in different water samples and the recovery of total Sn was in the range of 98.7–101.7%. In order to verify the accuracy of the method, a certified reference water sample was analyzed and the results obtained were in good agreement with the certified value.     

Crystallographic report: Bis(norfloxacin)dilead(II) tetranitrate, [Pb2(H‐Norf)2(ONO2)4]

The centrosymmetric binuclear structure of [Pb₂(H‐Norf)₂(ONO₂)₄]shows the geometry around each lead(II) atom to be distorted trigonal bipyramidal with Pb–O distances ranging from 2.357(3) to 2.769(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

BAHADUR ASYMPTOTIC EFFICIENCY IN A SEMIPARAMETRIC REGRESSION MODEL

ＢＡＨＡＤＵＲＡＳＹＭＰＴＯＴＩＣＥＦＦＩＣＩＥＮＣＹＩＮＡＳＥＭＩＰＡＲＡＭＥＴＲＩＣＲＥＧＲＥＳＳＩＯＮＭＯＤＥＬ￥ＬＩＡＮＧＨＵＡ；ＣＨＥＮＧＰＩＮＧＡｂｓｔｒａｃｔ：ＴｈｅａｕｔｈｏｒＳｇｉｖｅＭＬＥθ１ＭＬｏｆθ１ｉｎｔｈｅｍｏｄｅｌＹ＝θ...     

多孔硅制备过程中B,P杂质原子的作用

采用DV-Xα方法对多孔硅形成过程中位于表层的B和P杂质原子的作用进行研究,结果表明位于顶层硅原子层中的B和P杂质原子均可削弱其邻近的Si-Si键强度,因而可能导致出现腐蚀的突破点,再通过分析杂质对表面区势场的改变,可以认为位于顶层硅原子层中的B杂质原子产生腐蚀的突破点的可能性更大。 关键词：     

SXDG-1型汽车前照灯全自动检测仪的微机控制

SXDG—1型汽车前照灯全自动检测仪是用于检测汽车前照大灯光轴的偏斜情况及发光强度并进行定量检验的专用设备。它可以自动测出有关参数,并予以数字显示和打印输出。本文介绍了该仪器的主要性能、工作原理及微机控制系统(包括硬件结构和软件设计思想等)。     

ESR方法研究高TC氧化物的超导电性

用电子顺磁共振方法研究了一些高温超导氧化物样品的零场非共振吸收信号和正常的ＥＳＲ共振信号。认为这种方法可以作为鉴别样品进入超导态的实验判据之一。利用零场非共振吸收实验给出的下临界磁场Ｈｃ１（Ｔ）很好地遵多Ｈｃ１（Ｔ）＝Ｈｃ１（０）（１－Ｔ＆＾２／Ｔｃ＾２）。     

产量──密度模型讨论

本文给出产量与密度函数关系     

煤颗粒燃烧破碎特性及其分数维理论

本文采用激光衍射法和光学显微计算机图像系统及自行开发的软件,测量了三个典型煤在快速加热初期燃烧、等温加热燃烧和火焰燃烧方式的颗粒尺寸,运用分数维理论,建立了煤燃烧颗粒破碎理论,实验和理论研究揭示了煤燃烧中颗粒尺寸变化的本质,理论计算和实验结果符合良好。     

牙齿化石中由辐照产生的陷阱电子的热稳定性研究

本文对周口店北京猿人遗址的动物牙齿化石进行了辐照产生的陷阱捕获电子的热稳定性研究和釉质样品及牙质样品的热稳定性对比实验。得到釉质样品中g=2.0016 ESR峰的寿命为7.1×10⁶年(20℃)。说明了取该峰进行ESR年代测定的可信性和用釉质样品进行ESR年代测定的必要性。