Efficiency of shear surface wave transformation by the motion of the confining domain wall

The transformation of a shear surface magnetoelastic wave by the motion of the 180° confining domain wall in a ferromagnet is considered. Changes in the wave spectrum due to the motion of the wall are correlated with the variations of the energies of the elastic and magnetic subsystems. The efficiency of surface wave transformation by the domain wall motion is estimated in terms of energy. The frequency dependences of the mean energy density of the wave are found. It is shown that the energy density grows with wall velocity.     

Influence of Pretreatment of Expanded Graphite on Its Sorption Properties with Respect to Petroleum

Petroleum sorption on expanded graphite prepared from residual graphite hydrosulfate at 300-900°C was studied as influenced by pretreatment of the sorbent with water.     

Optical and photoelectric properties of helical quantum wires

The appearance of a steady current in a helical quantum wire under circularly polarized light is predicted. The effect is associated with the appearance of a travelling electromagnetic wave in the coordinate system related to the wire, the wavelength being determined by the period of the helix. The gyrotropy of a medium consisting of parallel quantum wires is considered.     

Degradation of Metal 2-Acrylamido-2-methylpropanesulfonate-N-Vinylpyrrolidine Copolymers in Aqueous Solutions Containing Different Cations

The influence of single- and double-charged cations on degradation of metal 2-acrylamido-2-methylpropanesulfonate-N-vinylpyrrolidine copolymers in aqueous solutions in the presence of potassium peroxodisulfate, K₂S₂O₈, at 50 and 70°C was studied by viscosimetry.     

Preparation and Characteristics of a Cation Exchanger Based on Oxidized Anthracite

The features of anthracite oxidation as influenced by temperature and time were determined. Physicochemical and sorption characteristics of the resulting cation exchanger were studied.     

THE SOUND FIELD OF A ROTOR IN A STATIONARY DUCT

A method is developed for the prediction of noise from rotors in an axisymmetric duct at rest. The technique combines a previously developed model for noise from disc sources with a boundary integral equation method for scattering from the duct surface. Recent developments in the theory of Gaussian quadrature and generalized elliptic integrals are used to simplify the implementation of the formulation. The sound field of a simplified model ducted rotor is then calculated and its structure examined in the framework of known features of the field around rotating sources. It is found that, as for an open rotor, the sonic radius plays an important role in the structure of the field.     

Structure–electrical property study of anisotropic polyaniline films

The relationships of the structure and electrical properties of anisotropic HCl‐doped polyaniline (PANI) films cast from N,N′‐dimethylpropylene urea (DMPU) solutions and stretched to different draw ratios were studied. The anisotropic structure of the stretched PANI films was examined by X‐ray diffraction, near‐infrared wave‐guide coupling, and polarized infrared measurements. The PANI emeraldine base (EB) films cast from DMPU solutions had a single‐phase noncrystalline structure, and stretching of the films did not cause crystallization to occur. The transition moment angles of two weakly absorbing infrared bands were determined, and the Hermans' orientation functions for the PANI EB films were calculated. The PANI films were then doped with HCl, and the electrical properties were determined by impedance spectroscopy. With a specially designed test fixture, the in‐plane and through‐plane impedance was obtained. The conductivity along the stretch direction increased with orientation. The in‐plane conductivity was significantly higher than the through‐plane conductivity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 823–841, 2003     

Magnetic properties of lanthanum orthoferrite fine powders prepared by different chemical routes

Fine powders of lanthanum iron oxide, LaFeO₃, have been prepared by solid state reaction as well as sol-gel synthesis and nebulized spray pyrolysis. Structures, morphologies and magnetic susceptibility measurements of these powders have been examined. The powders prepared by all the three low-temperature routes contain nearly spherical particles with an average diameter of 40 nm. These samples show a lower Neel temperature than the powder prepared by solid state reaction besides showing much lower magnetic susceptibility at low temperatures. Dedicated to Professor C N R Rao on his 70th birthday     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003