Physical Continuity and Vertical Alignment of Block Copolymer Domains by Kinetically Controlled Electrospray Deposition

The fabrication of block copolymer (BCP) thin films is reported with vertically aligned cylindrical domains using continuous electrospray deposition onto bare wafer surfaces. The out‐of‐plane orientation of hexagonally packed styrene cylinders is achieved in the “fast‐wet” deposition regime in which rapid evaporation of the solvent in deposited droplets of polymer solution drives the vertical alignment of the self‐assembled structure. Thermally activated crosslinking of the polybutadiene matrix provides kinetic control of the morphology, freezing the vertical alignment and preventing relaxation of the system to its preferred parallel orientation on the nontreated substrate. Physically continuous vertically oriented domains can be achieved over several micrometers of film thickness. The ability of electrospray deposition to fabricate well‐ordered and aligned BCP films on nontreated substrates, the low amount of material used relative to spin‐coating, and the continuous nature of the deposition may open up new opportunities for BCP thin films.

     

Secretion of adenylate kinase 1 is required for extracellular ATP synthesis in C2C12 myotubes

Extracellular ATP (exATP) has been known to be a critical ligand regulating skeletal muscle differentiation and contractibility. ExATP synthesis was greatly increased with the high level of adenylate kinase 1 (AK1) and ATP synthase beta during C2C12 myogenesis. The exATP synthesis was abolished by the knock-down of AK1 but not by that of ATP synthase beta in C2C12 myotubes, suggesting that AK1 is required for exATP synthesis in myotubes. However, membrane-bound AK1beta was not involved in exATP synthesis because its expression level was decreased during myogenesis in spite of its localization in the lipid rafts that contain various kinds of receptors and mediate cell signal transduction, cell migration, and differentiation. Interestingly, cytoplasmic AK1 was secreted from C2C12 myotubes but not from C2C12 myoblasts. Taken together all these data, we can conclude that AK1 secretion is required for the exATP generation in myotubes.     

Use of a photocatalytic membrane reactor for the removal of natural organic matter in water: Effect of photoinduced desorption and ferrihydrite adsorption

The photocatalytic degradation of natural organic matter (NOM) would be an attractive option in the treatment of drinking water. The performance of a submerged photocatalytic membrane reactor (PMR) was investigated with regard to the removal of NOM and the control of membrane fouling. In particular, this work focused on the adsorption and desorption of humic acids (HA) and lake water NOM at the surface of TiO₂ photocatalyts and ferrihydrite (FH) adsorbents in the PMR for water treatment. The addition of FH particles with a large sorption capacity helped remove the NOM released from TiO₂ particles, but FH suspended in water affected the photocatalysis of lake water NOM with a low specific UV absorbance (SUVA) value. To prevent the UV light being scattered by FH without any photocatalytic activity, FH particles were attached to a submerged microfiltration (MF) membrane, which contributed to a greater removal of NOM during long-term PMR operation. The further removal of NOM from aqueous solution was achieved due to the synergistic effect of TiO₂ photocatalysis and FH adsorption in PMR while minimizing the influence of photoinduced desorption of NOM. No significant membrane fouling occurred when the submerged PMR was operated even at high flux levels (>25 L/m² h), as long as photocatalytic decomposition took place.     

Simplest method for creating micropatterned nanostructures on PDMS with UV light

The fabrication of micropatterned structures on PDMS is a critical step in soft lithography, microfluidics, and many other PDMS-based applications. To substitute traditional mold-casting methods, we develop a simple method to create micropatterned nanostructures on PDMS in one step. After exposing a flat PDMS surface to a UV pen lamp through a photomask (such as a TEM grid), micropatterned nanostructures can be formed readily on the PDMS surface. We also demonstrate that fabricated PDMS can be used for the microcontact printing of protein immunoglobulin (IgG) on solid surfaces. This method is probably the simplest method of creating micropatterned nanostructures on PDMS reported so far because it does not need casting, surface coating, or chemical reagents. Only a UV pen lamp and a photomask are required, and this method can be performed under ambient conditions without vacuum. We expect that this method will greatly benefit researchers who use PDMS regularly in various applications such as soft lithography and microfluidics.     

Roles of gangliosides in mouse embryogenesis and embryonic stem cell differentiation

Gangliosides have been suggested to play important roles in various functions such as adhesion, cell differentiation, growth control, and signaling. Mouse follicular development, ovulation, and luteinization during the estrous cycle are regulated by several hormones and cell-cell interactions. In addition, spermatogenesis in seminiferous tubules of adult testes is also regulated by several hormones, including follicle-stimulating hormone (FSH) and luteinizing hormone (LH) and cell-cell interactions. The regulation of these processes by hormones and cell-cell interactions provides evidence for the importance of surface membrane components, including gangliosides. During preimplantation embryo development, a mammalian embryo undergoes a series of cleavage divisions whereby a zygote is converted into a blastocyst that is sufficiently competent to be implanted in the ma ternal uterus and continue its development. Mouse embryonic stem (mES) cells are pluripotent cells derived from mouse embryo, specifically, from the inner cell mass of blastocysts. Differentiated neuronal cells are derived from mES cells through the formation of embryonic bodies (EBs). EBs recapitulate many aspects of lineage-specific differentiation and temporal and spatial gene expression patterns during early embryogenesis. Previous studies on ganglioside expression during mouse embryonic development (including during in vitro fertilization, ovulation, spermatogenesis, and embryogenesis) reported that gangliosides were expressed in both undifferentiated and differentiated (or differentiating) mES cells. In this review, we summarize some of the advances in our understanding of the functional roles of gangliosides during the stages of mouse embryonic development, including ovulation, spermatogenesis, and embryogenesis, focusing on undifferentiated and differentiated mES cells (neuronal cells).     

Synthesis of poly(acrylic acid) (PAA) modified Pluronic P123 copolymers for pH-stimulated release of doxorubicin

Pluronic P123 was chain-extended at their terminal groups using atom transfer radical polymerization to form poly(acrylic acid) (PAA) tails and obtain the PAA-b-P123-b-PAA (P123-PAA) copolymer. The incorporation of PAA had the effect of increasing the carrier's drug loading capacity of an anti-cancer drug, Doxorubicin (DOX), and also allowed for pH-controlled release of the drug. Drug release assays showed that up to 60% of DOX cargo could be retained in the DOX/P123-PAA complex for 3 days at normal physiological pH (7.4). This was then followed by a secondary burst release of DOX when the environment became more acidic (pH 5). Therefore, it was possible that the more acidic physiological environment of tumor sites could be used to trigger an accelerated release of DOX from the drug carriers. The material was demonstrated for potential application in the delivery of cationic drugs for cancer treatment.     

Quantum computation with surface-state electrons by rapid population passages

Quantum computation requires coherently controlling the evolutions of qubits.Usually,these manipulations are implemented by precisely designing the durations(such as theπ-pulses)of the Rabi oscillations and tunable interbit coupling.Relaxing this requirement,herein we show that the desired population transfers between the logic states can be deterministically realized(and thus quantum computation could be implemented)both adiabatically and non-adiabatically,by performing the duration-insensitive quantum manipulations.Our proposal is specifically demonstrated with the surface-state of electrons floating on the liquid helium,but could also be applied to the other artificially controllable systems for quantum computing.     

LC Determination of trans-3,5,3′,4′,5′-Pentamethoxystilbene in Rat Plasma

A simple LC method has been developed and validated to determine trans-3,5,3′,4′,5′-pentamethoxystilbene (PMS) in rat plasma. Chromatographic separation was achieved through gradient delivery of acetonitrile and water (1.5 mL min^?1) at 50 °C. PMS was quantified using UV detection at 320 nm. The standard curve ranged from 15 to 1,500 ng mL^?1. The intra- and inter-day precisions, in terms of CV, were all less than 10% while the inter-day and intra-day bias ranged from ?6.8 to 8.3%. The plasma PMS levels were monitored in Sprague-Dawley rats after drug administration. This simple LC method appears to be useful in the pharmacokinetic investigation of PMS.     

N-Acyliminium ion cyclizations of trimethylsilylmethylallenes

N-Acyliminium ion cyclizations were studied with allenylmethylsilanes to synthesize nitrogen heterocycles. N-Acyliminium ion cyclizations were carried out by exposure of precursors 6 and 7 to Lewis acid. The precursors 6 were converted to pyrrolizidinone derivatives 9 with an exo-allene moiety, while the precursors 7 to indolizidinone derivatives 10 with an exo-1,3-diene moiety.     

Recording and reconstruction of digital Gabor hologram

This paper looks at some as yet undisclosed observations in the recording and reconstruction of digital Gabor hologram. Small particles on the specimen plane diffract the illuminating spherical wave to form the object wave which interferes with the un-diffracted reference to form the in-line hologram. The interference is similar to that between two spherical wavefronts. It is shown that resolution enhancement can be achieved in the recording process through the use of wavefronts with different curvature. Numerical reconstruction of this hologram with a conjugate of the illuminating (reference) wave provides the in-focus real image at the object plane. It is exemplified that the proper choice of the reconstruction wavefront can optically magnify the reconstructed image enabling one to better visualize the resolution enhancement. Both theoretical analysis and experimental confirmation are provided for these observations.