Nonequilibrium solid phase formation studied by lattice dynamics calculation and ion beam mixing in an immiscible Co-Ag system

For the equilibrium immiscible Co-Ag system, a proven realistic ab initio derived n-body potential is applied to study the nonequilibrium solid phase formation at three chemical stoichiometries of Co/Ag = 1:3, 1:1, and 3:1. To predict the structural stability, the elastic constants and the phonon spectra are calculated at the chosen stoichiometries with a total of eight hypothetical crystalline structures. The calculated results suggest that four compounds, that is, D0(3) CoAg3, B1 CoAg, B2 CoAg, and D0(3) Co3Ag, are unstable, as they all feature negative elastic constants as well as imaginary phonons, and that another four compounds of both fcc-type L1(2) and hcp-type D0(19) structures at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, may elastically be favored and therefore obtainable under some specific conditions. It is also found that all the calculated elastic constants and phonon spectra are coincident within the framework of the elastic theory. Moreover, the calculated elastic constants are in good agreement with those acquired directly from ab initio calculations, lending support to the validity of the ab initio derived n-body Co-Ag potential as well as its resultant elastic constants and the phonon spectra. Interestingly, some of the predicted nonequilibrium solid phases, that is, two hcp-type compounds at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, are indeed obtained in ion beam mixing experiments and their lattice constants determined by diffraction analysis are in good agreement with those from calculations.     

The anion sequence in the phase transformation of mesostructures templated by non-ionic block copolymers

A p6m to Ia3d mesophase evolution is achieved by simply adjusting the acidity and/or anion species in the presence of block copolymers; the unusual anion sequence that affects the phase behavior of block copolymer templated mesostructured solids is revealed to be SO(4)(2-)(HSO(4)(-)) > NO(3)(-) > Br(-) > Cl(-).     

1''-苯基-3''-甲基-5''-氧代吡唑-4''-基乙醛酸希土配合物的合成及性质研究

本文采用电导、pH滴定法研究了乙醇-水溶液中希土与1′-苯基-3′-甲基-5′-氧代吡唑-4′-基乙醛酸(简称H₂A)的配位反应.合成了15种新的希土固态配合物.通过元素分析、化学分析、水份分析确定了配合物的化学组成为RE(HA)₃·nH₂O(RE=Ce、Pr、Sm、Tm、Lu、n=1;RE=La、Nd、Eu、Gd、Tb、Dy、Ho、Er、Yb、Y,n=1-2).并对配合物的红外光谱、核磁共振谱、热稳定性、紫外光谱、溶解性及摩尔电导进行了测定.     

Studies on fluorenscence resonance energy transfer between CdS nanoparticles and DOCAI dyes

The water-soluble CdS nanoparticles were synthesized in aqueous solution. A novel fluorescence resonance energy transfer (FRET) system with CdS nanoparticles as energy donors and 3,30-diethyl-oxadicarbocyanine iodide (DOCAI) dyes as energy accepter has been developed.     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.     

Molecularly imprinted solid-phase extraction of (-)-ephedrine from Chinese Ephedra

Method of molecularly imprinted solid phase extraction (MISPE) of (-)-ephedrine from Chinese Ephedra has been developed in the research. The molecularly imprinted polymer (MIP) with good selectivity and affinity for (-)-ephedrine was synthesized with (-)-ephedrine as the template, methacrylic acid as the functional monomer. The washing and elution conditions in MISPE were selected and optimized for efficient analyte extraction and sample clean-up. A clean analytical HPLC base line of ephedra extract was obtained after MISPE, which indicated that the sample pre-treatment was efficient. Good recovery and precision were obtained in the assessment for the MISPE-HPLC procedure, which demonstrated it is a reliable method and can be used for the determination of (-)-ephedrine in herbal ephedra.     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

MODIFICATION OF TRANSITION METAL CATIONS TO POLYMER-STABILIZED PLATINUM COLLOIDAL CLUSTERS IN ENANTIOSELECTIVE HYDROGENATION OF METHYL PYRUVATE

Modification of transition metal cations to polymer-stabilized Pt colloidal clusters modified with cinchonidine was studied in enantioselective hydrogenation of methyl pyruvate. Compared to the enantiomeric excess (e.e.) value (71.4%) obtained without the presence of metal cations, obvious e.e. enhancement (up to 82.5%) was resulted from the addition of Zn^2 but with a certain decrease in activity. The reaction parameters in the presence of Zn^2 were also studied. It was found that the Pt colloidal catalysts in the presence of metal cations performed very differently from that in the absence of metal cations.