Wide tuning characteristics of double-ring coupled lasers

The wide tuning characteristics of double-ring coupled lasers with/without an extended waveguide are analyzed and optimized using the scattering matrix formalism. To obtain the optimum design schemes of the tunable laser diodes, the cross coupling ratios of two rings, the tuning enhancement factor, the propagation loss of passive waveguides, the optical gain of an active region, and the back and front-facet reflectivity of the waveguide are taken into account. When the coupling ratio of the ring and input/output waveguides is fixed, the extinction ratio and the linewidth are decreased as the tuning enhancement factor is increased, while the tuning range is increased.     

Luminescent characteristics of CaTiO3:Pr thin films prepared by pulsed laser deposition method with various substrates

CaTiO₃:Pr³⁺ films were deposited on different substrates such as Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica using pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by XRD and SEM measurements. The films grown on the different substrates have different crystallinity and morphology. The FWHM of (2 0 0) peak are 0.18, 0.25, 0.28, and 0.30 for Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica, respectively. The grain sizes of phosphors grown on different substrates were estimated by using Scherrer's formula and the maximum crystallite size observed for the thin film grown on Al₂O₃ (0 0 0 1). The room temperature PL spectra exhibit only the red emission peak at 613 nm radiated from the transition of (¹D₂ → ³H₄) and the maximum PL intensity for the films grown on the Al₂O₃ (0 0 0 1) is 1.1, 1.4, and 3.7 times higher than that of the CaTiO₃:Pr³⁺ films grown on MgO (1 0 0), Si (1 0 0), and fused Sillica substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates.     

Scanning ion conductance microscopy for imaging biological samples in liquid: a comparative study with atomic force microscopy and scanning electron microscopy

The present study was designed to show the applicability of scanning ion conductance microscopy (SICM) for imaging different types of biological samples. For this purpose, we first applied SICM to image collagen fibrils and showed the usefulness of the approach-retract scanning (ARS)/hopping mode for such samples with steep slopes. Comparison of SICM images with those obtained by AFM revealed that the ARS/hopping SICM mode can probe the surface topography of collagen fibrils and chromosomes at nanoscale resolution under liquid conditions. In addition, we successfully imaged cultured HeLa cells, with 15 μm in height by ARS/hopping SICM mode. Because SICM can obtain non-contact (or force-free) images, delicate cellular projections were visualized on the surface of the fixed cell. SICM imaging of live HeLa cells further demonstrated its applicability to study the morphological dynamics associated with biological processes on the time scale of minutes under liquid conditions. We further applied SICM for imaging the luminal surface of the trachea and succeeded in visualizing the surface of both ciliated and non-ciliated cells. These SICM images were comparable with those obtained by scanning electron microscopy. Although the dynamic mode of AFM provides better resolution than the ARS/hopping mode of SICM in some samples, only the latter can obtain contact-free images of samples with steep slopes, rendering it an important tool for observing live cells as well as unfixed or fixed soft samples with complicated shapes. Taken together, we demonstrate that SICM imaging, especially using an ARS/hopping mode, is a useful technique with unique capabilities for imaging the three-dimensional topography of a range of biological samples under physiologically relevant aqueous conditions.     

Charge-orbital density wave and superconductivity in the strong spin-orbit coupled IrTe2:Pd

Using transmission electron microscopy, the anomalies in resistivity and magnetic susceptibility at ~262 K in IrTe2 are found to accompany the superlattice peaks with q[over q=(1/5,0,-1/5). The wave vector is consistent with our theoretical calculation for the Fermi surface nesting vector, indicating that the ~262 K transition is of the charge-orbital density wave (DW) type. We also discovered that both Pd intercalation and substitution induce bulk superconductivity with T(c) up to ~3 K, which competes with DW in a quantum critical pointlike manner.     

Advances in digital holographic micro-PTV for analyzing microscale flows

The accurate three-dimensional (3D) velocity field measurement technique has been receiving large attention in the study of microfluidics. DHM-PTV technique was developed by combining the digital holographic microscopy and particle tracking velocimetry technique. DHM-PTV is an ideal method for measuring three-component-three-dimensional (3C-3D) velocity field in a microscale flow with a fairly good spatial resolution. The advances in the DHM-PTV technique enable the measurement of various microscale flows, such as transport of red blood cells in a microtube and 3D flows in microfluidic devices. DHM-PTV is also applied in studying the motile behavior of swimming microorganisms. DHM-PTV would play an important role in ascertaining the undiscovered basic physics in various microscale and biofluid flow phenomena. In the current study, the basic principle of the DHM-PTV technique and its typical applications to microscale flows are introduced and discussed.     

Spin waves and revised crystal structure of honeycomb iridate Na2IrO3

We report inelastic neutron scattering measurements on Na2IrO3, a candidate for the Kitaev spin model on the honeycomb lattice. We observe spin-wave excitations below 5 meV with a dispersion that can be accounted for by including substantial further-neighbor exchanges that stabilize zigzag magnetic order. The onset of long-range magnetic order below T(N)=15.3 K is confirmed via the observation of oscillations in zero-field muon-spin rotation experiments. Combining single-crystal diffraction and density functional calculations we propose a revised crystal structure model with significant departures from the ideal 90° Ir-O-Ir bonds required for dominant Kitaev exchange.     

Precise measurement of the CP violation parameter sin2φ1 in B0→(cc¯)K0 decays

We present a precise measurement of the CP violation parameter sin2φ1 and the direct CP violation parameter A(f) using the final data sample of 772×10(6) BB[over ˉ] pairs collected at the Υ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. One neutral B meson is reconstructed in a J/ψK(S)(0), ψ(2S)K(S)(0), χ(c1)K(S)(0), or J/ψK(L)(0) CP eigenstate and its flavor is identified from the decay products of the accompanying B meson. From the distribution of proper-time intervals between the two B decays, we obtain the following CP violation parameters: sin2φ1=0.667±0.023(stat)±0.012(syst) and A(f)=0.006±0.016(stat)±0.012(syst).     

Self‐formed Schottky barrier induced selector‐less RRAM for cross‐point memory applications

We propose a selector‐less Pr_0.7Ca_0.3MnO₃ (PCMO) based resistive‐switching RAM (RRAM) for high‐density cross‐point memory array applications. First, we investigate the inhomogeneous barrier with an effective barrier height (Φ_eff), i.e., self‐formed Schottky barrier. In addition, a scalable 4F² selector‐less cross‐point 1 kb RRAM array has been successfully fabricated, demonstrating set, reset, and read operation for high cell efficiency and high‐density memory applications. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Adaptive ANOVA decomposition of stochastic incompressible and compressible flows

Realistic representation of stochastic inputs associated with various sources of uncertainty in the simulation of fluid flows leads to high dimensional representations that are computationally prohibitive. We investigate the use of adaptive ANOVA decomposition as an effective dimension–reduction technique in modeling steady incompressible and compressible flows with nominal dimension of random space up to 100. We present three different adaptivity criteria and compare the adaptive ANOVA method against sparse grid, Monte Carlo and quasi-Monte Carlo methods to evaluate its relative efficiency and accuracy. For the incompressible flow problem, the effect of random temperature boundary conditions (modeled as high-dimensional stochastic processes) on the Nusselt number is investigated for different values of correlation length. For the compressible flow, the effects of random geometric perturbations (simulating random roughness) on the scattering of a strong shock wave is investigated both analytically and numerically. A probabilistic collocation method is combined with adaptive ANOVA to obtain both incompressible and compressible flow solutions. We demonstrate that for both cases even draconian truncations of the ANOVA expansion lead to accurate solutions with a speed-up factor of three orders of magnitude compared to Monte Carlo and at least one order of magnitude compared to sparse grids for comparable accuracy.     

Observation of D+(s)K- and evidence for D+(s)pi- final states in neutral B decays

We report the first observation of a B meson decay that is not accessible by a direct spectator process. The channel B(0)-->D(+)(s)K- is found in a sample of 85 x 10(6) BB; events, collected with the Belle detector at KEKB, with a branching fraction B(B(0)-->D(+)(s)K-)=(4.6(+1.2)(-1.1)+/-1.3) x 10(-5). We also obtain evidence for the B0-->D(+)(s)pi(-) decay with branching fraction B(B0-->D(+)(s)pi(-))=(2.4(+1.0)(-0.8)+/-0.7) x 10(-5). This value may be used to extract a model-dependent value of |V(ub)|.