Effective isolation of magnesium lithospermate B and its inhibition of aldose reductase and fibronectin on mesangial cell line

We developed an effective isolation method of magnesium lithospermate B from Salviae miltiorrhizae Radix and found for the first time that magnesium lithospermate B shows strong in vitro inhibition (IC50=0.04 microM) of aldose reductase (AR), 2.5 times than that of clinically used epalrestat (IC50=0.1 microM) and accumulation of fibronectin dose dependently.     

Improved immunodetection of human papillomavirus E7

Human papillomavirus E7 (HPV E7) is a viral oncoprotein that plays an important role in cervical carcinogenesis through binding with retinoblastoma protein (Rb). Inactivation of Rb by E7 is necessary but not sufficient for cellular transformation, suggesting other protein-protein interactions are required for E7-mediated cellular transformation aside from the interaction with Rb. However, studies on the oncogenic function of HPV E7 have been limited by its poor immunoreactivity. In this report, we show that the fixation of purified recombinant HPV E7 on blotted nitrocellulose membrane with glutaldehyde markedly enhanced the immunoreactivity of HPV E7 protein. Using HeLa and Caski cell lines which are infected with HPV 18 and HPV 16, respectively, we demonstrated that native HPV E7 proteins also could be detected by this method. These results therefore can provide the experimental conditions for detection of HPV E7 proteins with greater sensitivity and may help to analyze E7 functions.     

Photochemical interaction of polystyrene nanospheres with 193 nm pulsed laser light

The photochemical interaction of 193 nm light with polystyrene nanospheres is used to produce particles with a controlled size and morphology. Laser fluences from 0 to 0.14 J/cm2 at 10 and 50 Hz photofragment nearly monodisperse 110 nm spherical polystyrene particles. The size distributions before and after irradiation are measured with a scanning mobility particle sizer (SMPS), and the morphology of the irradiated particles is examined with a transmission electron microscope (TEM). The results show that the irradiated particles have a smaller mean diameter ( approximately 25 nm) and a number concentration more than an order of magnitude higher than nonirradiated particles. The particles are formed by nucleation of gas-phase species produced by photolytic decomposition of nanospheres. A nondimensional parameter, the photon-to-atom ratio (PAR), is used to interpret the laser-particle interaction energetics.     

Isolation of rice allergenic cDNA clones from a rice cDNA library by immunoscreening with a polyclonal antibody specific to 16 kD rice allergenic protein

Clinical cases of type-1 hypersensitive reaction to rice (Oryza sativa) have been reported in western countries as well as in Japan. Among rice proteins, 14-16 kD globulin proteins encoded by multiple gene family have been identified as major rice allergens. In this study, a rice cDNA library was constructed using lambda UniZap vector and screened with a rat anti-16 kD globulin protein polyclonal antibody in order to isolate Korean rice allergenic cDNA clones. Five independent cDNA clones, termed RAK1-5, were obtained after second rounds of plaque assay and immunoblot analysis. These clones encoded 13-19 kD recombinant proteins upon IPTG induction, which were identified by the polyclonal antibody in immunoblot analysis. DNA sequencing analysis showed that RAK1-4 have 99% sequence homology with RA5b, and RAK5 is closely related with RA14c. This result indicated that RA5b gene is widely distributed in our cDNA library among other possible rice allergenic genes, and more study is needed to isolate heterogeneous or novel rice allergen genes.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

Design Features of a Prompt Gamma Neutron Activation Analysis System at HANARO

The design features are described of a prompt gamma neutron activation analysis system at HANARO, a 30 MW research reactor in the Korea Atomic Energy Research Institute. The beam consists of polychromatic thermal neutrons diffracted by a set of pyrolytic graphite crystals at orders n in the range 1n6 at a Bragg angle of 45° on a horizontal beam line. A neutron flux of 1.0·10⁸ n·cm^–2·s^–1 is calculated at the sample position from the reflectivity of the crystal which has been confirmed in a measurement of a diffracted neutron spectrum using a time-of-flight spectrometer and gold-wire activation. The fast neutron and gamma backgrounds will be low due to the use of a diffracted beam and a tapered collimator. The detection system comprises a 30% n-type HPGe detector, signal electronics and a fast ADC. The first application of this system will be the analysis of boron concentration in biological samples for neutron capture therapy. Construction of the beam line and the arrangement of the detection system is proceeding.     

Operating characteristics and energy distribution in transferred plasma arc systems

A specially designed plasma chamber was constructed to study the operating characteristics of a dc plasma-transferred arc of argon, struck between a fluid convective cathode and a water-cooled anode. The arc voltage increased markedly with arc length and with an increase in the inlet velocity of the argon flow past the cathode tip, and much less with an increase in current. Radiation from the plasma column to the chamber walls and transfer of energy to the anode were the two principal modes of transfer of the arc energy. The former was dominant in the case of long arcs and at high inlet argon velocities. At the anode, the major contribution was from electron transfer, which occurred on a very small area of the anode (～5 mm in diameter). Convective heat transfer from the plasma was somewhat less. In all cases, the arc energy contributions to cathode cooling and to the exit gas enthalpy were small. From total heat flux and radiative heat transfer measurements, it was estimated that the plasma temperature just above the anode was in the range 10,000–12,000 K. Preliminary experiments with an anode consisting of molten copper showed that the arc root was no longer fixed but moved around continuously. The arc was othwewise quite stable, and its operating characteristics differed little from those reported for solid anodes, in spite of the greater extent of metal vaporization.     

Colloidal lithographic nanopatterning via reactive ion etching

We report here a novel colloidal lithographic approach to the fabrication of nonspherical colloidal particle arrays with a long-range order by selective reactive ion etching (RIE) of multilayered spherical colloidal particles. First, layered colloidal crystals with different crystal structures (or orientations) were self-organized onto substrates. Then, during the RIE, the upper layer in the colloidal multilayer acted as a mask for the lower layer and the resulting anisotropic etching created nonspherical particle arrays and new patterns. The new patterns have shapes that are different from the original as a result of the relative shadowing of the RIE process by the top layer and the lower layers. The shape and size of the particles and patterns were dependent on the crystal orientation relative to the etchant flow, the number of colloidal layers, and the RIE conditions. The various colloidal patterns can be used as masks for two-dimensional (2-D) nanopatterns. In addition, the resulting nonspherical particles can be used as novel building blocks for colloidal photonic crystals.     

Determination of copper(II) in various samples by flame atomic absorption spectrophotometry after column preconcentration onto pulverized Amberlite XAD-4 loaded with N-benzoylphenylhydroxylamine

A sensitive technique for the determination of trace Cu(II) in various samples after column preconcentration by adsorbing onto pulverized Amberlite XAD-4 loaded with N-benzoylphenylhydroxylamine (BPHA) was developed. Several experimental conditions, such as the size of XAD-4, adsorption flow rate, pH of sample solution, and so forth, were optimized. The interfering effects of diverse concomitant ions were investigated. Al(III), Fe(III), Ni(II), and Co(II) interfered, but the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BPHA resin to 0.30 g. The dynamic range, the correlation coefficient (R₂), and the detection limit obtained by the proposed technique were 1.0–60, 0.9953, and 0.83 ng/mL, respectively. For validating the technique, the aqueous samples (stream water, reservoir water, and wastewater), the diluted brass sample, and the plastic sample were used as real samples. Recovery yields of 94–102% were obtained. These measured data were not different from ICP-MS data at the 95% confidence level. This method was also validated by rice flour CRM (normal, fortified) samples. Based on the results of the experiment, it has been found that the proposed technique can be applied to the determination of Cu(II) in various real samples. The text was submitted by the authors in English.