Precise measurement of the CP violation parameter sin2φ1 in B0→(cc¯)K0 decays

We present a precise measurement of the CP violation parameter sin2φ1 and the direct CP violation parameter A(f) using the final data sample of 772×10(6) BB[over ˉ] pairs collected at the Υ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. One neutral B meson is reconstructed in a J/ψK(S)(0), ψ(2S)K(S)(0), χ(c1)K(S)(0), or J/ψK(L)(0) CP eigenstate and its flavor is identified from the decay products of the accompanying B meson. From the distribution of proper-time intervals between the two B decays, we obtain the following CP violation parameters: sin2φ1=0.667±0.023(stat)±0.012(syst) and A(f)=0.006±0.016(stat)±0.012(syst).     

Chemical bonding states and atomic distribution within Zn(S,O) film prepared on CIGS/Mo/glass substrates by chemical bath deposition

Zn(S,O) thin films fabricated on CIGS/Mo/glass substrates by using chemical bath deposition (CBD) in acidic and basic solutions were studied. The Zn(S,O) thin films prepared in acidic solution [A-Zn(S,O) thin film] showed better crystallinity and a more compact surface morphology with larger grains than those prepared in basic solution [B-Zn(S,O) thin film] did. From the analysis of the chemical bonding states, at the initial growth step, the concentration ratio of Zn–O/Zn–S bonds in A-Zn(S,O) thin films was found to be approximately zero, while that in B-Zn(S,O) thin films was approximately equal to 1. The elemental distribution according to depth, determined by secondary ion mass spectroscopy (SIMS), was shown to be uniform throughout both the A- and B-Zn(S,O) thin films. To reduce the number of Zn–O bonds in the B-Zn(S,O) thin films, the samples were post-annealed at up to 300 °C under vacuum, after which the concentration ratio of Zn–O/Zn–S bonds decreased by about 71% without any change in the crystallinity or surface morphology.     

Large four-wave mixing of spatially extended excitonic states in thin GaAs layers

We study the size dependence of the nonlinear response of weakly confined excitons for the size region beyond the long wavelength approximation regime. The observed degenerate-four-wave mixing signal of GaAs thin layers exhibits an anomalous size dependence, where the signal is resonantly enhanced at a particular thickness region. The theoretical analysis elucidates that this enhancement is due to the size-resonant enhancement of the internal field with a spatial structure relevant to the nondipole-type excitonic state. These results establish the formerly proposed new type of size dependence of nonlinear response due to the nonlocality induced double resonance.     

A fast estimation of sonar cross section of acoustically large and complex underwater targets using a deterministic scattering center model

In this paper, a fast method is proposed to estimate the sonar cross section of acoustically large and complex underwater targets such as submarines and torpedoes. The proposed method is based on a deterministic scattering center model which constructs scattering center database by using a combining method of physical optics and geometric optics and then reconstructs sonar cross section patterns from that database with a polynomial interpolation with respect to the incident angle. The parametric studies to find appropriate intervals of the reference incident angle are systematically carried out for simple targets such as a flat square plate and an orthogonal dihedral. Moreover, to validate the proposed method, sonar cross sections of real-like targets such as a pressure hull and an idealized submarine are calculated. The comparisons show that the results by the proposed method are in good agreement with those by the direct calculation.     

Elasticity transition and loop formation in vibrated bead chains: A simulation of polymer chains

By measuring the distribution function of the end-to-end distance, we find that strongly shaken bead chains exhibit many properties, such as the rigid-rod-to-Gaussian chain transition, scaling, fast drop of loop formation probability in the short-chain regime, and enhancement of loop formation probability for kinked chains, of long-chain polymers. Though there is difference in local details between our chains and the worm-like chains, our results are consistent with recent calculations based on the worm-like chain model in many respects.     

Nanoscale formation mechanism of conducting filaments in NiO thin films

We have studied the nanoscale electrical properties of NiO thin films by using conducting atomic force microscopy (CAFM) to understand the mechanism of resistance change of the NiO thin films as we changed the applied voltage. We observed that inhomogeneous conducting filaments were generated by external voltage bias; in addition, some of the inhomogeneous conducting filaments were durable while some of them were not, and they disappeared. We deduced that the resistance change of the NiO thin films was related to inhomogeneous filamentary conducting paths generated by both Ni ions in thermodynamically unstable NiO and the existence of conducting filament segments generated by high voltage bias.     

Radiation exposure to operator and patients during cardiac electrophysiology study,radiofrequency catheter ablation and cardiac device implantation procedures

The purpose of this study was to measure the radiation exposure to operator and patient during cardiac electrophysiology study, radiofrequency catheter ablation and cardiac device implantation procedures and to calculate the allowable number of cases per year. We carried out 9 electrophysiology studies, 40 radiofrequency catheter ablation and 11 cardiac device implantation procedures. To measure occupational radiation dose and dose–area product (DAP), 13 photoluminescence glass dosimeters were placed at eyes (inside and outside lead glass), thyroids (inside and outside thyroid collar), chest (inside and outside lead apron), wrists, genital of the operator (inside lead apron), and 6 of photoluminescence glass dosimeters were placed at eyes, thyroids, chest and genital of the patient. Exposure time and DAP values were 11.7?±?11.8?min and 23.2?±?26.2?Gy?cm² for electrophysiology study; 36.5?±?42.1?min and 822.4?±?125.5?Gy?cm² for radiofrequency catheter ablation; 16.2?±?9.3?min and 27.8?±?16.5?Gy?cm² for cardiac device implantation procedure, prospectively. 4591 electrophysiology studies can be conducted within the occupational exposure limit for the eyes (150?mSv), and 658-electrophysiology studies with radiofrequency catheter ablation can be carried out within the occupational exposure limit for the hands (500?mSv). 1654 cardiac device implantation procedure can be conducted within the occupational exposure limit for the eyes (150?mSv). The amounts of the operator and patient's radiation exposure were comparatively small. So, electrophysiology study, radio frequency catheter ablation and cardiac device implantation procedures are safe when performed with modern equipment and optimized protective radiation protect equipment.     

Iterative method for dynamic condensation combined with substructuring scheme

An iterated improved reduced system (IIRS) procedure combined with substructuring scheme for both undamped and nonclassically damped structures is presented. Iterated IIRS method is an efficient reduction technique because the highly accurate eigenproperties from the repeatedly updated condensed matrices can be obtained without consuming expensive computational cost. However, single domain direct approach of this method to large structures requires much computational resources and even makes analysis intractable in the case only limited computer storage is available. These problems can be overcome by combining the substructuring scheme with IIRS procedure. The newly developed IIRS method combined with a substructuring scheme can provide an efficient methodology for large-scale eigenvalue problems. The validation of the present method and the evaluation of computational efficiency are demonstrated through the numerical examples.     

Reversible photomechanical switching of individual engineered molecules at a metallic surface

We have observed reversible light-induced mechanical switching for individual organic molecules bound to a metal surface. Scanning tunneling microscopy (STM) was used to image the features of individual azobenzene molecules on Au(111) before and after reversibly cycling their mechanical structure between trans and cis states using light. Azobenzene molecules were engineered to increase their surface photomechanical activity by attaching varying numbers of tert-butyl (TB) ligands ("legs") to the azobenzene phenyl rings. STM images show that increasing the number of TB legs "lifts" the azobenzene molecules from the substrate, thereby increasing molecular photomechanical activity by decreasing molecule-surface coupling.