Synthesis of novel 1,4-, 3,4-, and 4,5-dihydropyrimidines: First successful POCl3 chlorination and regioselective alkoxycarbonylation

Chlorination of 5,6-dihydropyrimidine-4-(3H)-one derivatives (1) with POCl₃ gave 1,4(3,4)-dihydropyrimidines (3), whose alkoxycarbonylation (ClCOOREt₃N or NaH) afforded regioselectively novel compounds (4). A new Pummerer rearrangement of compound (1, X= ---S(O)CH₃) with ₃, gave compound (5h).     

Der geschwindigkeitsbestimmende Schritt bei der Decarboxy-lierung von 2,4-Dihydroxybenzoesäure in mässig konzentrierter wässeriger Salzsäure

The decarboxylation kinetics of 2,4-dihydroxybenzoic acid have been studied in 0.1–8 N aqueous HCl at 50°. At low HCl concentrations, the observed first order rate constant, k, increases with increasing acidity of the solution. In solutions with 3.5–6 N HCl, k remains constant. The D₂O solvent isotope effect decreases from ^kH₂O/^kD₂O = 2.0 in 1N HCl to 1.3 in 5 N HCl, and it remains unchanged at 1.3 if the HCl concentration is increased further to 8 N. It is concluded that an increase of the acidity of the solution causes a change of the rate determining step from slow proton transfer to rate limiting C? C bond cleavage.     

Catalyzing methanolysis of alkyl halides in the interior of an amphiphilic molecular basket

A molecular basket with four cholate units assembled on a cone-shaped calix[4]arene assumed reversed micelle-like conformation in 5% methanol/carbon tetrachloride. The inwardly facing hydroxyl groups on the cholates concentrated the polar solvent from the mostly nonpolar mixture. Methanolysis of alkyl halides benefited from the concentrated pocket of methanol if the substrate was capable of entering the basket. Substrates that were too large or too hydrophobic to fit within the basket showed no rate acceleration.     

Product ion studies of diastereomeric benzo[ghi]fluoranthene tetraols by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and post-source decay

The product ion formation characteristics of the four diastereomeric tetrahydroxy benzo[ghi]fluoranthene compounds formed by hydrolysis of the syn and anti diastereomers of trans-3,4-dihydroxy-5,5a-epoxy-3,4,5,5a-tetrahydrobenzo[ghi]fluoranthene are studied using matrix-assisted laser desorption/ionization and post-source decay (PSD) to determine a correlation between the fragmentation characteristics of these tetraols and the structures of the diol-epoxide diastereomers from which they are hydrolyzed. The tetraols formed by the trans ring opening of the diol epoxides during hydrolysis yield product ion spectra specific for the syn and anti configurations of their precursor diol epoxides. All four diastereomeric tetraols form product ions by the losses of one and/or two water molecules in varying proportions when lithium-cationized molecule ions (m/z 301) are selected for PSD product ion analysis. The differences in the PSD spectra of these four Li+-cationized molecules are rationalized in terms of a water loss mechanism that involves the 1,2 elimination of a hydrogen atom and hydroxyl group that are cis with respect to each other on adjacent carbons.     

Apparent hydrodynamic thickness of densely grafted polymer layers in a theta solvent

We study the drainage of a near-theta solvent through densely grafted polymer layers and compare to recent notions that these layers display little permeability to solvent flow at surface separations less than a “hydrodynamic thickness.” The solvent is trans-decalin (a near-theta solvent at the experimental temperature of 24°C). The polymer is polystyrene (PS) end-attached to two opposed mica surfaces via the selective adsorption of the polyvinylpyridine (PVP) block of a PS-PVP diblock copolymer. The experimental probe was a surface forces apparatus modified to apply small-amplitude oscillatory displacements in the normal direction. Out-of-phase responses reflected viscous flow of solvent alone—the PS chains did not appear to contribute to dissipation over the oscillation frequencies studied. The value of the hydrodynamic thickness (R_H) was less than the coil thickness (L_o) measured independently from the onset of surface–surface interactions in the force-distance profile, implying significant penetration of the velocity field into the polymer layer. As the surface–surface separation was reduced from 3L_o to 0.3L_o, the apparent hydrodynamic thickness (R) decreased monotonically to values R ≪ R_H. Physically, this indicates that the “slip plane” moved progressively closer to the solid surfaces with decreasing surface–surface separation. This was accompanied by augmentation of the effective viscosity by a factor of up to approximately 5, indicating somewhat diminished permeability of solvent through the overlapping polymer layers. Similar results hold for the flow through surface-anchored polymers in a good solvent. It is interesting to note the strong stretching of densely end-grafted polymers in a theta solvent. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2961–2968, 1997     

Electro-optic applications of soluble polypyrrole

The optical transmittance of the film spin-cast from the polypyrrole(PPy) solution in chloroform depended on the thickness of the film. The film with 80% transmittance showed a surface resistivity of 23kΩ/□. A TN-LCD cell with rubbed PPy films as the LC alignment layers responded properly to an applied potential of 3.0V. Reflective mode cholesteric LCD cells made with black PPy film electrodes responded to AC fields to switch between the planar and focal conic states. PPy with imine structures introduced by deprotonation of doped PPy with NaOH solution was used as a diode material to exhibit a photo-current on exposing to light.     

Study on a separation method of radionuclides (Ba, Sr) from LiCl salt wastes generated from the electroreduction process of spent nuclear fuel

In this paper, a separation method of radionuclides (Ba, Sr) from LiCl salt wastes generated from the electroreduction process of spent nuclear fuel was studied to recover pure LiCl salts and reduce radioactive wastes. The method consisted of chemical conversion process of BaCl₂ and SrCl₂ in LiCl molten salts by using lithium compounds and vacuum distillation process of LiCl salts. In the chemical conversion, BaCl₂ and SrCl₂ in LiCl molten salts were mainly converted into (Ba,Sr)CO₃ or (Ba,Sr)SO₄. Contents of Ba and Sr in LiCl salts recovered from the vacuum distillation process were equal to about 0.01 of initial concentrations of Ba and Sr in LiCl molten salts. These results will be utilized to recycle the LiCl salt wastes.     

Intracrystalline Diffusion in Mesoporous Zeolites

Specially synthesized extra‐large crystallites of zeolite LTA with intentionally added mesoporosity are used for an in‐depth study of guest diffusion in hierarchical nanoporous materials by the pulsed field gradient NMR technique. Using propane as a guest molecule, intracrystalline mass transfer is demonstrated to be adequately described by a single effective diffusivity resulting from the weighted average of the diffusivities in the two (micro‐ and meso‐) pore spaces. Gas‐kinetic order‐of‐magnitude estimates of the diffusivities are in satisfactory agreement with the experimental data and are thus shown to provide a straightforward means for predicting and quantifying the benefit of hierarchically structured nanoporous materials in comparison with their purely microporous equivalent.     

Synthesis of triphenylamine-based thiophene-(N-aryl)pyrrole-thiophene dyes for dye-sensitized solar cell applications

Two new triphenylamine-based metal-free organic dyes (TPTDYE-1 and TPTDYE-2) containing 1-(2,6-diisopropylphenyl)-2,5-di(2-thienyl)pyrrole as a new π-conjugated chromophore were synthesized for dye-sensitized solar cell (DSSC) applications. TPTDYE-1 containing three donor groups around the acceptor group was found to show relatively narrow absorption band from 300 nm to 470 nm while TPTDYE-2 having extended π–π delocalization between the donor and acceptor group showed broad absorption band from 300 nm to 550 nm. The electrochemical studies indicate that the HOMO–LUMO energy gap of TPTDYE-1 is considerably wider than that of TPTDYE-2. The dye-sensitized solar cell performance of each dye was investigated, and the TPTDYE-2-sensitized cell was found to show a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 75%, a short-circuit photocurrent density (J_sc) of 13.50 mA/cm², an open-circuit voltage (V_oc) of 0.72 V, and a fill factor (FF) of 0.69, corresponding to an overall conversion efficiency of 6.71% under simulated AM 1.5 irradiation (100 mW/cm²). Under the same condition the TPTDYE-1-sensitized cell showed the same IPCE value of 75% with a promising conversion efficiency of 6.00%, a J_sc of 11.11 mA/cm², a V_oc of 0.76 V, and a FF of 0.71.     

CDK5-dependent inhibitory phosphorylation of Drp1 during neuronal maturation

Mitochondrial functions are essential for the survival and function of neurons. Recently, it has been demonstrated that mitochondrial functions are highly associated with mitochondrial morphology, which is dynamically changed by the balance between fusion and fission. Mitochondrial morphology is primarily controlled by the activation of dynamin-related proteins including dynamin-related protein 1 (Drp1), which promotes mitochondrial fission. Drp1 activity is regulated by several post-translational modifications, thereby modifying mitochondrial morphology. Here, we found that phosphorylation of Drp1 at serine 616 (S616) is mediated by cyclin-dependent kinase 5 (CDK5) in post-mitotic rat neurons. Perturbation of CDK5 activity modified the level of Drp1^S616 phosphorylation and mitochondrial morphology in neurons. In addition, phosphorylated Drp1^S616 preferentially localized as a cytosolic monomer compared with total Drp1. Furthermore, roscovitine, a chemical inhibitor of CDKs, increased oligomerization and mitochondrial translocation of Drp1, suggesting that CDK5-dependent phosphorylation of Drp1 serves to reduce Drp1''s fission-promoting activity. Taken together, we propose that CDK5 has a significant role in the regulation of mitochondrial morphology via inhibitory phosphorylation of Drp1^S616 in post-mitotic neurons.