Systematic investigation of droplet generation at T-junctions

Droplet microfluidics has attracted much attention in recent years. For many droplet-based applications, researchers want to predict the size of the droplets in a certain experimental condition. To meet this need, van Steijn and colleagues proposed an elegant theoretical model that predicts the volume of droplets generated in a common channel configuration for forming a steady-state, continuous stream of droplets, the T-junction geometry. To determine the accuracy of this model in predicting droplet volume, we performed a systematic experimental study over two orders of magnitude in capillary number. We found that this model, albeit elegant, has a limited range of interfacial tension over which it can predict accurately the droplet volume. Our experimental results, together with fluid dynamic simulations, allowed us to highlight the importance of physical fluid properties when employing theoretical models.     

Peptide-modified inverted colloidal crystal scaffolds with bone marrow stromal cells in the treatment for spinal cord injury

Carboxyl groups of surface-tethered poly(acrylic acid) (PAA) brushes should be able to serve as versatile moieties for a wide range of chemical modifications, including an attachment of bioactive species that can act as sensing probes for biosensors. In this research, poly(tert-butyl acrylate) (Pt-BA) brushes were prepared by surface-initiated atom transfer radical polymerization of tert-butyl acrylate. PAA brushes were then obtained after removal of the tert-butyl groups from the Pt-BA brushes by acid hydrolysis. The carboxyl group density of the PAA brushes can be varied as a function of chain length or molecular weight. The reactivity of the carboxyl groups of PAA brushes towards the immobilization of biotin, a frequently used model bioactive probe in biosensing applications, was evaluated. Qualitative determination of streptavidin (SA) binding to the biotin-attached PAA brushes was verified by fluorescence microscopy. The efficiency of the PAA brushes to act as a three dimensional (3D) precursor layer for biosensing applications was further demonstrated using surface plasmon resonance (SPR), where the biotin-attached PAA brushes showed an enhanced signal for the biospecific binding of SA in comparison with a self-assembled monolayer (SAM) of a carboxyl-terminated alkanethiol, used as a model two-dimensional (2D) conventional precursor layer. The PAA brushes showed very low non-specific interactions with two other tested proteins of a similar pI but different sizes. This desirable feature should be highly beneficial for the development of biosensors.     

A time-dependent wave packet quantum scattering study of the reaction HD+ (v = 0 - 3;j0 = 1) + He --> HeH+(HeD+) + D(H)

Time-dependent wave packet quantum scattering (TWQS) calculations are presented for HD(+) (v = 0 - 3;j(0)=1) + He collisions in the center-of-mass collision energy (E(T)) range of 0.0-2.0 eV. The present TWQS approach accounts for Coriolis coupling and uses the ab initio potential energy surface of Palmieri et al. [Mol. Phys. 98, 1839 (2000)]. For a fixed total angular momentum J, the energy dependence of reaction probabilities exhibits quantum resonance structure. The resonances are more pronounced for low J values and for the HeH(+) + D channel than for the HeD(+) + H channel and are particularly prominent near threshold. The quantum effects are no longer discernable in the integral cross sections, which compare closely to quasiclassical trajectory calculations conducted on the same potential energy surface. The integral cross sections also compare well to recent state-selected experimental values over the same reactant and translational energy range. Classical impulsive dynamics and steric arguments can account for the significant isotope effect in favor of the deuteron transfer channel observed for HD(+)(v<3) and low translational energies. At higher reactant energies, angular momentum constraints favor the proton-transfer channel, and isotopic differences in the integral cross sections are no longer significant. The integral cross sections as well as the J dependence of partial cross sections exhibit a significant alignment effect in favor of collisions with the HD(+) rotational angular momentum vector perpendicular to the Jacobi R coordinate. This effect is most pronounced for the proton-transfer channel at low vibrational and translational energies.     

Exploring Regioselective Bond Cleavage and Cross‐Coupling Reactions using a Low‐Valent Nickel Complex

Recently, esters have received much attention as transmetalation partners for cross‐coupling reactions. Herein, we report a systematic study of the reactivity of a series of esters and thioesters with [{(dtbpe)Ni}₂(μ‐η²:η²‐C₆H₆)] (dtbpe=1,2‐bis(di‐tert‐butyl)phosphinoethane), which is a source of (dtbpe)nickel(0). Trifluoromethylthioesters were found to form η²‐carbonyl complexes. In contrast, acetylthioesters underwent rapid C_acyl?S bond cleavage followed by decarbonylation to generate methylnickel complexes. This decarbonylation could be pushed backwards by the addition of CO, allowing for regeneration of the thioester. Most of the thioester complexes were found to undergo stoichiometric cross‐coupling with phenylboronic acid to yield sulfides. While ethyl trifluoroacetate was also found to form an η²‐carbonyl complex, phenyl esters were found to predominantly undergo C_aryl?O bond cleavage to yield arylnickel complexes. These could also undergo transmetalation to yield biaryls. Attempts to render the reactions catalytic were hindered by ligand scrambling to yield nickel bis(acetate) complexes, the formation of which was supported by independent syntheses. Finally, 2‐naphthyl acetate was also found to undergo clean C_aryl?O bond cleavage, and although stoichiometric cross‐coupling with phenylboronic acid proceeded with good yield, catalytic turnover has so far proven elusive.     

Synthesis of nano-sized TiO(2)/poly(AA-co-MMA) composites by heterocoagulation and blending with PET

Nano-sized TiO(2) or SiO(2)/TiO(2) particles were prepared by hydrolysis and condensation reactions in aqueous media, followed by mixing with poly(AA-co-MMA) latex to form different composites, then blending with poly(ethylene terephthalate), PET. The TGA results of composites indicated that negative charged latexes had greater interaction with TiO(2)/ or SiO(2)/TiO(2) particles through strong electrostatic forces, while cationic latexes incorporated with TiO(2) or SiO(2)/TiO(2) particles by pH induced coagulation, carbonyl group chelation and hydrogen bonding. The soapless latex polymer particles showed lower ability of adsorption to TiO(2) particles due to the decrease of total surface area of these larger particles. If SiO(2)/TiO(2) particles were used instead of TiO(2) particles, unexpected high adsorption result was observed. Morphology results observed by SEM showed that PET blended with positive charged composites was more homogeneous than PET blended with negative charged composites. DSC results also indicated that the T(g) of PET was increased, melting temperatures (T(m) or T(m)(')) were increased, and the temperature range of crystallization was narrowed after blending with the composites. The presence of composites affected the mobility and packing of PET molecular chains therefore changing the thermal properties of PET.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

Tin stearate organometallic precursor prepared SnO2 quantum dots nanopowder for aqueous- and non-aqueous medium photocatalytic hydrogen gas evolution

Current study reports a rapid one-pot non-hydrolytic condition in the synthesis of Sn O₂ QDs nanopowder using tin（II） stearate（Sn（St）₂） as environmentally-benign organometallic precursor,which is an unprecedentedly employed-compound in preceding Sn O₂ nanopowder productions.The as-synthesized Sn O₂ QDs that are hydrophobic can be easily transferred from organic solvent to aqueous solution through a robust ligand exchange method.The stearate-capping ligands on the surface of QDs can be replaced by beta-cyclodextrin（β-CD） and eventually render the QDs highly water soluble,which ultimately make it exhibit bi-functionality for different liquid medium applications.Structural characterizations reveal that the bi-functional QDs are indeed well-matched with the standard rutile Sn O₂ cassiterite phase without the presence of any impurities.The QDs can be interchangeably used as photocatalyst for both aqueous and non-aqueous phase,where it shows significant enhancement of hydrogen gas production as compared to that of commercial Sn O₂ nanopowder.