Analyses of preservatives by capillary electrochromatography using methacrylate ester-based monolithic columns

Five common food preservatives were analyzed by capillary electrochromatography, utilizing a methacrylate ester-based monolithic capillary as separation column. In order to optimize the separation of these preservatives, the effects of the pore size of the polymeric stationary phase, the pH and composition of the mobile phase on separation were examined. For all analytes, it was found that an increase in pore size caused a reduction in retention time. However, separation performances were greatly improved in monolithic columns with smaller pore sizes. The pH of the mobile phase had little influence on separation resolution, but a dramatic effect on the amount of sample that was needed to be electrokinetically injected into the monolithic column. In addition, the retention behaviors of these analytes were strongly influenced by the level of acetonitrile in the mobile phase. An optimal separation of the five preservatives was obtained within 7.0 min with a pH 3.0 mobile phase composed of phosphate buffer and acetonitrile 35:65 v/v. Finally, preservatives in real commercial products, including cold syrup, lotion, wine, and soy sauces, were successfully determined by the methacrylate ester-based polymeric monolithic column under this optimized condition.     

A Microbial Sensor Based on Direct Electron Transfer at Shewanella Sp. Drop‐Coated Screen‐Printed Carbon Electrodes

Aerobically grown Shewanella sp. bacterial suspension drop‐coated on a disposable screen‐printed carbon electrode was found to possess electroactivity without the aid of redox mediator. Cyclic voltammetric studies revealed the characteristics of a mixed diffusion adsorption‐controlled electrochemical process for direct electron transfer at the bacteria‐modified electrode. Both FE‐SEM and ATR FT‐IR experiments were carried out to investigate the surface characteristics. The electroanalytical applicability was further demonstrated for electrocatalytic reduction of arsenite, hydrogen peroxide and nitrite. Low cost and very simple manufacturing procedure allow for the proposed bacterial sensor to be applied as disposable devices.     

Charmed andϕmeson decay constants from 2+1-flavor lattice QCD

On a lattice with 2+1-flavor dynamical domain-wall fermions at the physical pion mass,we calculate the decay constants of D_s^* , D^* ,and φ .The lattice size is 48^3×96 ,which corresponds to a spatial extension of -5.5 fm,with a lattice spacing of a\approx a≈0.114 fm.For the valence light,strange,and charm quarks,we use overlap fermions at several mass points close to their physical values.Our results at the physical point are f_D=213(5) MeV, f_Ds=249(7) MeV, f_D^*=234(6) MeV, f_Ds^*=274(7) MeV,and f_Ds=241(9) MeV.The couplings of D^* and D_s^* to the tensor current( f_V^T )can be derived from ratios f_D^*^T/f_D^*=0.91(4) and f_Ds^*^T/f_Ds^*=0.92(4) ,respectively,which are the first lattice quantum chromodynamics(QCD)results.We also obtain ratios f_D^*/f_D=1.10(3) and f_Ds^*/f_Ds=1.10(4) ,which reflect the size of heavy quark symmetry breaking in charmed mesons.Ratios f_Ds/f_D=1.16(3) and f_Ds^*/f_D^*=1.17(3) can be taken as a measure of SU(3)flavor symmetry breaking.     

Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg grating

A sensor head consisting of a photonic crystal fiber (PCF)-based Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. The MZI fabricated by splicing a short length of PCF between two single-mode fibers with the air-hole structure that completely collapsed near the splicing points, is sensitive to fiber bending and surrounding temperature, while the FBG is only sensitive to the later. Simultaneous measurement of curvature and temperature is therefore obtained. Sensitivities of 4.06 nm/m^− 1 and 6.30 pm/°C are achieved experimentally for curvature and temperature, respectively. And the corresponding resolutions are 5.2 × 10^− 4 m^− 1 and 1.25 °C for curvature and temperature, respectively, based on the wavelength measurement resolution of 10 pm.     

Tens of GHz Tantalum pentoxide‐based micro‐ring all‐optical modulator for Si photonics

A tantalum pentoxide‐based (Ta₂O₅‐based) micro‐ring all‐optical modulator was fabricated. The refractive index inside the micro‐ring cavity was modified using the Kerr effect by injecting a pumped pulse. The transmittance of the ring resonator was controlled to achieve all‐optical modulation at the wavelength of the injected probe. When 12 GHz pulses with a peak power of 1.2 W were coupled in the ring cavity, the transmission spectrum of the Ta₂O₅ resonator was red‐shifted by 0.04 nm because of the Kerr effect. The relationship between the modulation depth and gap of the Ta₂O₅ directional coupler is discussed. An optimized gap of 1100 nm was obtained, and a maximum buildup factor of 11.7 with 84% modulation depth was achieved. The nonlinear refractive index of Ta₂O₅ at 1.55 μm was estimated as 3.4 × 10^?14 cm²/W based on the Kerr effect, which is almost an order of magnitude higher than that of Si₃N₄. All results indicate that Ta₂O₅ has potential for use in nonlinear waveguide applications with modulation speeds as high as tens of GHz.

     

Highly sensitive miniature photonic crystal fiber refractive index sensor based on mode field excitation

A highly sensitive miniature photonic crystal fiber refractive index sensor based on field mode excitation is presented. The sensor is fabricated by melting one end of a photonic crystal fiber into a rounded tip and splicing and collapsing the other end with a single-mode fiber. The rounded tip is able to induce cladding mode excitation, which resulted in an additional phase delay. Linear response of 262.28 nm/refractive index unit in the refractive index range of 1.337 to 1.395 is obtained for the physical length of a 953 μm sensor. The sensor is also shown to be insensitive to environmental temperature.     

Temperature dependence of excitonic emission in cubic CdSe thin film

A detailed photoluminescence investigation of the thermal redshift and broadening of the excitonic line of cubic CdSe film grown by molecular beam epitaxy is presented. Free excitonic emission from the cubic CdSe film was observed at low temperature. Temperature-dependent measurement was performed to obtain material parameters related to exciton-phonon interaction by fitting the experimental data to the phenomenological model. The relative contribution of both acoustic and optical phonon to the band gap shrinkage and exciton linewidth broadening are discussed. Exciton binding energy of 16±1.5 meV was determined from the Arrhenius analysis.     

Bis‐benzimidazolium‐palladium system catalyzed Suzuki‐Miyaura coupling reaction of aryl bromides under mild conditions

Bis‐benzimidazolium salts were prepared successfully from commercially available and inexpensive o‐phenylenediamine through a series of simple reactions. The bis‐NHC‐Pd complexes prepared in situ can catalyze Suzuki‐Miyaura cross‐coupling reaction under very mild conditions in aqueous media with excellent yields. The efficiency of this reaction is demonstrated by its compatibility with a range of functional groups. Di‐ortho‐substituted biaryls could be accomplished in 89–99% yields. Moreover, the rigorous exclusion of air or moisture is not required in these transformations.     

Facile Generation of Thermally Activated Delayed Fluorescence and Fabrication of Highly Efficient Non-Doped OLEDs Based on Triazine Derivatives

A series of donor–acceptor–donor triazine-based molecules with thermally activated delayed fluorescence (TADF) properties were synthesized to obtain highly efficient blue-emitting OLEDs with non-doped emitting layers (EMLs). The targeted molecules use a triazine core as the electron acceptor, and a benzene ring as the conjugated linker with different electron donors to alternate the energy level of the HOMO to further tune the emission color. The introduction of long alkyl chains on the triazine core inhibits the unwanted intermolecular D –D/A–A-type π–π interactions, resulting in the intermolecular D–A charge transfer. The weak aggregation-caused quenching (ACQ) effect caused by the suppressed intermolecular D –D/A–A-type π–π interaction further enhances the emission. The crowded molecular structure allows the electron donor and acceptor to be nearly orthogonal, thereby reducing the energy gap between triplet and singlet excited states (ΔE_ST). As a result, blue-emitting devices with TH-2DMAC and TH-2DPAC non-doped EMLs showed satisfactory efficiencies of 12.8 % and 15.8 %, respectively, which is one of the highest external quantum efficiency (EQEs) reported for blue TADF emitters (λ_peak<475 nm), demonstrating that our tailored molecular designs are promising strategies to endow OLEDs with excellent electroluminescent performances.     

Parotid perfusion in nasopharyngeal carcinoma patients in early-to-intermediate stage after low-dose intensity-modulated radiotherapy: Evaluated by fat-saturated dynamic contrast-enhanced magnetic resonance imaging

PurposeTo investigate parotid perfusion in early-to-intermediate stage after parotid-sparing radiation dose using fat-saturated DCE-MRI, and to verify whether the perfusion alteration was related to radiation dose and the PSV.Methods and MaterialsThirty-two parotid glands from 16 consecutive patients with pathologically proven nasopharyngeal carcinoma treated by IMRT were examined. The parotid glands received a radiation dose of 28.9 ± 3.9 Gy with a PSV of 43.1% ± 13.9%. Perfusion parameters were calculated using time-shifted Brix model from fat-saturated DCE-MRI data before (pre-RT) and in early-to-intermediate stage after (post-RT) IMRT. Paired t-test was used to evaluate perfusion changes, while Pearson's correlation test was used to examine perfusion dependency on radiation dose and PSV. For multiple comparisons Bonferroni correction was applied.ResultsSuccessful fat saturation was achieved in 29 of 32 parotid glands. Compared with pre-RT, the post-RT parotid glands showed significantly higher A, peak enhancement, and wash-in slope, plus a lower K_el, suggesting a mixed effect of increased vascular permeability and acinar loss. Linear regression showed that peak enhancement was positively associated with radiation dose in post-RT parotid glands. K_el and slope were negatively associated with PSV, while time-to-peak was positively associated with PSV significantly.ConclusionsOur results suggest that time-shifted Brix model is feasible for quantifying parotid perfusion using DCE-MRI. The perfusion alterations in early-to-intermediate stage after IMRT might be related to a mixed effect of increased vascular permeability and acinar loss with dose and PSV dependencies.