Reaction of Cl with CD4 excited to the second C-D stretching overtone

The effects of vibrational excitation on the Cl+CD(4) reaction are investigated by preparing three nearly isoenergetic vibrational states: mid R:3000 at 6279.66 cm(-1), |2100> at 6534.20 cm(-1), and |1110> at 6764.24 cm(-1), where |D(1)D(2)D(3)D(4)> identifies the number of vibrational quanta in each C-D oscillator. Vibrational excitation of the perdeuteromethane is via direct infrared pumping. The reaction is initiated by photolysis of molecular chlorine at 355 nm. The nascent methyl radical product distribution is measured by 2+1 resonance-enhanced multiphoton ionization at 330 nm. The resulting CD(3) state distributions reveal a preference to remove all energy available in the most excited C-D oscillator. Although the energetics are nearly identical, the authors observe strong mode specificity in which the CD(3) state distributions markedly differ between the three Cl-atom reactions. Reaction with CD(4) prepared in the |3000> mode leads to CD(3) products populated primarily in the ground state, reaction with CD(4) prepared in the |2100> mode leads primarily to CD(3) with one quantum of stretch excitation, and reaction with CD(4) prepared in the |1110> mode leads primarily to CD(3) with one quantum of C-D stretch excitation in two oscillators. There are some minor deviations from this behavior, most notably that the Cl atom is able to abstract more energy than is available in a single C-D oscillator, as in the case of |2100>, wherein a small population of ground-state CD(3) is observed. These exceptions likely result from the mixings between different second overtone stretch combination bands. They also measure isotropic and anisotropic time-of-flight profiles of CD(3) (nu(1)=1,2) products from the Cl+CD(4) |2100> reaction, providing speed distributions, spatial anisotropies, and differential cross sections that indicate that energy introduced as vibrational energy into the system essentially remains as such throughout the course of the reaction.     

Probing stereoselective inhibition of the acyl binding site of cholesterol esterase with four diastereomers of 2'-<Emphasis Type="Italic">N</Emphasis>-α-methylbenzylcarbamyl-1, 1'-bi-2-naphthol

Background  

Recently there has been increased interest in pancreatic cholesterol esterase due to correlation between enzymatic activity in vivo and absorption of dietary cholesterol. Cholesterol esterase plays a role in digestive lipid absorption in the upper intestinal tract, though its role in cholesterol absorption in particular is controversial. Serine lipases, acetylcholinesterase, butyrylcholinesterase, and cholesterol esterase belong to a large family of proteins called the α/β-hydrolase fold, and they share the same catalytic machinery as serine proteases in that they have an active site serine residue which, with a histidine and an aspartic or glutamic acid, forms a catalytic triad. The aim of this work is to study the stereoselectivity of the acyl chain binding site of the enzyme for four diastereomers of an inhibitor.     

Dinitrosyl iron complexes (DNICs) [L(2)Fe(NO)2]- (L = thiolate): interconversion among {Fe(NO)2}9 DNICs, {Fe(NO)2}10 DNICs, and [2Fe-2S] clusters, and the critical role of the thiolate ligands in regulating NO release of DNICs

Dinitrosyl iron complex [(-SC(7)H(4)SN)(2)Fe(NO)(2)](-) (1) was prepared by reaction of [S(5)Fe(NO)(2)](-) and bis(2-benzothiozolyl) disulfide. In synthesis of the analogous dinitrosyl iron compounds (DNICs), the stronger electron-donating thiolates [RS](-) (R = C(6)H(4)-o-NHCOCH(3), C(4)H(3)S, C(6)H(4)NH(2), Ph), compared to [-SC(7)H(4)SN](-) of complex 1, trigger thiolate-ligand substitution to yield [(-SC(6)H(4)-o-NHCOCH(3))(2)Fe(NO)(2)](-) (2), [(-SC(4)H(3)S)(2)Fe(NO)(2)](-) (3), and [(SPh)(2)Fe(NO)(2)](-) (4), respectively. At 298 K, complexes 2 and 3 exhibit a well-resolved five-line EPR signal at g = 2.038 and 2.027, respectively, the characteristic g value of DNICs. The magnetic susceptibility fit indicates that the resonance hybrid of {Fe(+)((*)NO)(2)}(9) and {Fe(-)((+)NO)(2)}(9) in 2 is dynamic by temperature. The IR nu(NO) stretching frequencies (ranging from (1766, 1716) to (1737, 1693) cm(-)(1) (THF)) of complexes 1-4 signal the entire window of possible electronic configurations for such stable and isolable {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-). The NO-releasing ability of {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) is finely tuned by the coordinated thiolate ligands. The less electron-donating thiolate ligands coordinated to {Fe(NO)(2)}(9) motif act as better NO-donor DNICs in the presence of NO-trapping agent [Fe(S,S-C(6)H(4))(2)](2)(2-). Interconversion between {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) and {Fe(NO)(2)}(10) [(Ph(3)P)(2)Fe(NO)(2)] was verified in the reaction of (a) [(RS)(2)Fe(NO)(2)](-), 10 equiv of PPh(3) and sodium-biphenyl, and (b) 2 equiv of thiol, [RS](-), and [(Ph(3)P)(2)Fe(NO)(2)], respectively. The biomimetic reaction cycle, transformation between {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) and {Fe(NO)(2)}(9) [(R'S)(2)Fe(NO)(2)](-), reversible interconversion of {Fe(NO)(2)}(9) and {Fe(NO)(2)}(10) DNICs, and degradation/reassembly of [2Fe-2S] clusters may decipher and predict the biological cycle of interconversion of {Fe(NO)(2)}(9) DNICs, {Fe(NO)(2)}(10) DNICs, and the [Fe-S] clusters in proteins.     

Multipoint parallel excitation and CCD-based imaging system for high-throughput fluorescence detection of biochip micro-arrays

We report the development and the characterization of a multipoint parallel excitation and CCD-based imaging system for high-throughput fluorescence detection of biochip micro-arrays. A two-dimensional array of (19×19) points with uniform intensity distribution, generated by a holographic array generator, was used for parallel excitation of two-dimensional micro-arrays of fluorescence samples. A CCD-based imaging system was used for high-throughput parallel detection and quantitative analysis of the fluorescence output. Micro-array samples of cyanine (Cy5) dye dots on silicon wafers and on glass substrates with varying concentration were used to evaluate the performance of the system. Results of fluorescence intensity measurements with varying concentration of dye and with different image acquisition time are presented. We have demonstrated that this novel approach will, in general, outperform the conventional approach in the excitation efficiency, the signal-to-noise ratio, and the throughput. The limitations and the potential improvements of the present method are discussed.     

The characterization of Cr secondary oxide phases in ZnO films studied by X-ray spectroscopy and photoemission spectroscopy

X-ray absorption near-edge structure (XANES), X-ray emission spectroscopy (XES), and X-ray photoemission spectroscopy (XPS) were used to characterize the Cr secondary oxide phases in ZnO films that had been prepared using a co-sputtering method. Analysis of the Cr L_3,2-edge XANES spectra reveals that the intensity of white-line features decreases subtly as the sputtering power increases, indicating that the occupation of Cr 3d orbitals increases with Cr concentration in (Zn, Cr)O films. The O K-edge spectra show that the intensity of XANES features of (Zn, Cr)O films is lower than those of ZnO film, suggesting enhanced occupation of O 2p-derived states through O 2p-Cr 3d hybridization. The XES and XPS spectra indicate that the line shapes in the valence band of (Zn, Cr)O films are quite different from those of ZnO and that the Cr₂O₃ phase dominates the spinel structure of (Zn, Cr)O films increasingly as the Cr sputtering power is increased. Over all results suggest that the non-ferromagnetic behavior of (Zn, Cr)O films can be attributed to the dominant presence of Cr₂O₃, whereas the bulk comprise phase segregations of Cr₂O₃ and/or ZnCr₂O₄, which results them the most stable TM-doped ZnO material against etching.     

Efficient beam-propagation method based on Padé approximants in the propagation direction

We propose a novel beam-propagation method (BPM) based on the higher-order Padé approximants in both the transverse and the longitudinal directions. Extending the Padé approximation to the propagation direction and adopting the multistep method increase the programming effort by only a small amount. Compared with the conventional BPM's, this method is more accurate and efficient. The accuracy and the propagation step size are well predicted by a phase analysis.     

Thermomechanical behavior of underfill/solder mask/substrate interface under thermal cycling

With the increasing application of flip-chip technology in the microelectronics industry, the adhesion strength of interfaces in flip-chip microelectronic structures has become an important issue for manufacturing and operation. In this paper we present an experimental investigation of the adhesive strength of underfill material to solder mask coated FR-4 substrate under thermal cycling. The effects of the number of thermal cycles on interfacial strength were investigated by using the button shear test. The relationship between interfacial strength and the thickness of solder mask was also examined. Furthermore, the morphologies of fracture surfaces of the test specimens were analyzed by scanning electron microscopy. The results of this study show that the interfacial strength of the underfill/solder mask/substrate joint was significantly reduced by thermal fatigue. Finally, the degradation behavior and possible mechanisms were then determined on the basis of these observations.     

A joint measurement of efficiency and effectiveness for non-storable commodities: Integrated data envelopment analysis approaches

Efficiency and effectiveness for non-storable commodities represent two distinct dimensions and a joint measurement of both is necessary to fully capture the overall performance. This paper proposes two novel integrated data envelopment analysis (IDEA) approaches, the integrated Charnes, Cooper and Rhodes (ICCR) and integrated Banker, Charnes and Cooper (IBCC) models, to jointly analyze the overall performance of non-storable commodities under constant and variable returns to scale technologies. The core logic of the proposed models is simultaneously determining the virtual multipliers associated with inputs, outputs, and consumption by additive specifications for technical efficiency and service effectiveness terms with equal weights. We show that both ICCR and IBCC models possess the essential properties of rationality, uniqueness, and benchmarking power. A case analysis also demonstrates that the proposed novel IDEA approaches have higher benchmarking power than the conventional separate DEA approaches. More generalized specifications of IDEA models with unequal weights are also elaborated.     

Determining the optimal production policy for a system with imperfect production and shortage

The classic EPQ model assumes that items are produced of perfect quality and no shortage is permitted. In the real world situation, however, due to process deterioration or other factors, the occurrence of imperfect quality items is inevitable. This paper develops an extended economic production quantity (EPQ) model with imperfect production, shortage, and imperfect rework. We assume that the quality scan is conducted during the production. The scanned imperfect items are classified as the repairable and scrap. We consider that not all of the repairable items can be restored to meet the specified quality standard. Only some portion of defective items can be restored as normal items, the other results in defective, due to repair failure, can be sold at a discounted price to a secondary market. The renewal reward theorem is utilized to deal with the variable cycle length. The production quantity and the shortage level are determined in an optimal manner so as to minimize the average system cost. A numerical example is used to demonstrate its practical usage. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Exact stability regions for quartic polynomials

Given an arbitrary real quartic polynomial, we find the exact region containing the coefficients of the polynomial such that all roots have absolute values less than 1.