Determining the optimal production policy for a system with imperfect production and shortage

The classic EPQ model assumes that items are produced of perfect quality and no shortage is permitted. In the real world situation, however, due to process deterioration or other factors, the occurrence of imperfect quality items is inevitable. This paper develops an extended economic production quantity (EPQ) model with imperfect production, shortage, and imperfect rework. We assume that the quality scan is conducted during the production. The scanned imperfect items are classified as the repairable and scrap. We consider that not all of the repairable items can be restored to meet the specified quality standard. Only some portion of defective items can be restored as normal items, the other results in defective, due to repair failure, can be sold at a discounted price to a secondary market. The renewal reward theorem is utilized to deal with the variable cycle length. The production quantity and the shortage level are determined in an optimal manner so as to minimize the average system cost. A numerical example is used to demonstrate its practical usage. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Direct contact versus solvent-shared ion pairs in NiCl2 electrolytes monitored by multiplet effects at Ni(II) L edge X-ray absorption

We investigate the local electronic structure in aqueous NiCl2 electrolytes by Ni L edge X-ray absorption spectroscopy. The experimental findings are interpreted in conjunction with multiplet calculations of the electronic structure and the resulting spectral shape. In contrast to the situation in the solid, the electronic structure in the electrolyte reflects the absence of direct contact Ni-Cl ion pairs. We observe a systematic change of the intensity ratio of singlet- and triplet-related spectral features as a function of electrolyte concentration. These changes can be described theoretically by a change in the weight of transition matrix contributions with different symmetries. We interpret these findings as being due to progressive distortions of the local symmetry induced by solvent-shared ion pairs.     

Global Analysis of the Flows of Fluids with Pressure-Dependent Viscosities

 To describe the flows of fluids over a wide range of pressures, it is necessary to take into account the fact that the viscosity of the fluid depends on the pressure. That the viscosity depends on the pressure has been verified by numerous careful experiments. While the existence of solutions local-in-time to the equations governing the flows of such fluids are available for small, special data and rather unrealistic dependence of the viscosity on the pressure, no global existence results are in place. Our interest here is to establish the existence of weak solutions for spatially periodic three-dimensional flows that are global in time, for a large class of physically meaningful viscosity-pressure relationships. (Accepted May 1, 2002) Published online November 15, 2002 Communicated by S. S. ANTMAN     

Production of l-DOPA by tyrosinase immobilized on modified polystyrene

Mushroom tyrosinase was immobilized on modified polystyrene—polyaminostyrene (PSNH) and polymethylchloridestyrene (PSCL)—to produce l-DOPA from l-tyrosine. Glutaraldehyde was used as an activating agent for the PSNH to immobilize the tyrosinase and 10% (w/v) glutaraldehyde was optimal in conferring the highest specific activity (11.96 U/g) to the PSNH. Methylchloride on the PSCL was directly linked with the tyrosinase, and 1.5 mmol of Cl/g was optimal in attaining the specific activity of 17.0 U/g. The temperature and optimal acidity were, respectively, 60°C and pH 5.5 for the PSNH, and 70°C and pH 3.0 for the PSCL. In a 50-mL batch reactor working over 36 h, the l-DOPA production rate at 30°C was 1.44 mg/(L·h) for the PSNH and 2.33 mg/(L·h) for the PSCL. The production rate over 36 h was 3.86 mg/(L·h) for the PSNH at 60°C and 5.54 mg/(L·h) for the PSCL at 70°C. Both of the immobilized enzymes showed a remarkable stability with almost no change in activity after being stored wet. The operational stability study indicated a 22.4% reduction in l-DOPA production for the PSNH and an 8.63% reduction for the PSCL over seven runs (each run was for 144h at 30°C) when the immobilized enzymes were used under turnover conditions. The immobilized tyrosinase was more stable on the PSCL than on the PSNH.     

Synthesis of 2-Oxo amide triacylglycerol analogues and study of their inhibition effect on pancreatic and gastric lipases

A general method for the synthesis of chiral 2-oxo amide triacylglycerol analogues, from (R)- or (S)-3-aminopropane-1,2-diol, was developed. These novel inhibitors of digestive lipases are analogues of the triacylglycerol molecule, a natural substrate of lipases, and they were designed to contain the 2-oxo amide functionality in place of the scissile ester bond at the sn-1 or sn-3 position and nonhydrolysable ether bonds instead of ester bonds at the other two remaining positions. The 2-oxo amide derivatives synthesised were tested for their ability to form stable monomolecular films at the air/water interface by recording their surface pressure/molecular area compression isotherms. The inhibition of porcine pancreatic and human gastric lipases by the 2-oxo amides was studied by means of the monolayer technique with mixed films of 1,2-dicaprin and with variable proportions of each inhibitor. The alpha50 values of these triacylglycerol analogues for PPL and HGL varied between 4.4 to 7.0% and 5.6 to 15.9%, respectively. The chirality at the sn-2 position of 2-oxo amide triacylglycerol analogues affected the alpha50 value for HGL, but not for PPL.     

Synthesis of symmetrical 1,5-bis-thio-substituted anthraquinones for cytotoxicity in cultured tumor cells and lipid peroxidation

The synthesis of a series of anthraquinone moieties bearing symmetrical sulfur-linked substituents in the 1 and 5 positions is described. These compounds were evaluated for their ability to inhibit the growth of suspended rat glioma C6 cells and human hepatoma G2 cells, respectively. In addition, the redox property of the compounds was determined based on the inhibition of lipid peroxidation in model membranes. Compounds 2a and 2h in this series compared favorably and exhibited the most potent cytotoxicity (0.02, 0.05 microM) against C6 cells in the XTT colorimetric assay. As far as redox properties are concerned, all bis-thio-anthraquinones show potential lipid peroxidation in model membranes very close to that of mitoxantrone (MX), and 2a, 2d, 2e, 2i, 2j, and 2k have more potential than that of MX. The lack of cytotoxicity of compound 2i cannot be related to lipid peroxidation, but the steric and electronic properties of the side-chain substituent maybe impair effective recognition of the cleavable complex. In contrast to MX, 2a and 2h are cytotoxic in rat glioma C6 cells and do not enhance lipid peroxidation in model membranes.     

Rapid Protein Hydrolysis by Microwave Irradiation Using Heat-Resistant Teflon-Pyrex Tubes

A rapid peptide-bond hydrolysis by means of microwave irradiation is introduced for the facile preparation of protein hydrolysates used for amino acid analysis. The optimal hydrolysis condition has been determined using several enzymes with known amino acid compositions. The effects of hydrolysis time on the recovery of various labile and hydrophobic amino acids are also exemplified in the microwave heating of standard amino acids. The method has been applied to the complete amino acid analysis with a single nonvolatile solvent of methanesulfonic acid with good recovery of tryptophan and half-cystine. It provides a radical expedition of protein and peptide hydrolysis via commercial microwave ovens and specially-designed Teflon-Pyrex tubes, circumventing the tedious procedures using vacuum-sealed pyrex lubes heating at 110°C for more than 24 h. This novel type of microwave chemistry associated with rapid peptide-bond cleavage is of great potential in the automation of the complete process of amino acid analysis starting from the preparation of protein hydrolysates.     

Tritium content as indicator of environmental character on Taiwan Island

Environmental characters have been established by tritium contents in well water, coastal seawater and reservoir water collected from various places around Taiwan island. Tritium concentrations of samples were detected by a liquid scintillation analyzer TRI-CARB-LSC 2550 TR mode, with a low level standard quench curve. After samples were concentrated by electrolysis, tritium concentration was detected in optimum conditions of LLLSA. An electrolytic enrichment technique was also developed with a eurrent density of 100 mA/cm² and 0.4–0.6% (Na₂O₂) electrolyte in concentrated samples. Data observed show a lower tritium concentration for coastal seawater than for wells in the same area. The tritium concentration ratio of well and coastal seawater on the western side of Taiwan is 4.000 and on the eastern side 5.801. Tritium content of reservoir water is related to the logarithm of effective volume capacity.     

Pretilt angle of liquid crystals and liquid-crystal alignment on microgrooved polyimide surfaces fabricated by soft embossing method

In this study, the soft embossing method is proposed to fabricate periodical microgrooved structure on polyimide surfaces. These microgrooved polyimide surfaces are assembled to form liquid-crystal cells. It is found that the director of liquid crystals uniformly aligns along the groove direction even when the groove width is as high as 3 microm. The anchoring energy of these microgrooved polyimide surfaces is higher than that of the typical rubbed surfaces. The pretilt angle of liquid crystals is adjusted by tuning the surface polarity of the polyimide alignment layer, which is identified by the advancing contact angle of water. The surface polarity of polyimide alignment layers is manipulated by simply mixing two kinds of polyimide: a more hydrophilic one and a more hydrophobic one. It is found that the pretilt angle of liquid crystals increases along with the advancing contact angle of water on the alignment layer under the condition of a fixed surface topography.     

An Efficient and High‐Yield One‐Pot Synthesis of Bis(oxazoline)s

An efficient and mild one‐pot synthesis of bis(oxazoline) (BOX) ligands is developed from reactions of dicarboxy dichlorides with β‐amino alcohols in the presence of 11.0 equiv. NEt₃ followed by the addition of 3.6 equiv. methanesulfonyl chloride (MsCl). Nine different BOX ligands were prepared in excellent yields of ≥ 80%. Advantages of this improved synthesis are mild reaction conditions, short total reaction time of 9 h, and high isolated yields.