Octahedral cobalt(III) complexes of the chloropentammine type. XVII. Association and reaction of some halogenopentamminecobalt(III) and halogenopentamminechromium(III) cations with hydroxide in aqueous dioxan

The replacement, by hydroxide ion, of the coordinated halide from some halogenopentamminecobalt(III) and -Chromium(III) cations in aqueous dioxan has been studied over a range of alkali concentrations up to 0.1 M. With excess of hydroxide ion at constant ionic strength, pseudo first-order rate constants were obtained. The results support a pre-equilibrium association of complex and hydroxide ions in these media, but do not provide distinction as to whether the resulting ion-pair subsequently reacts by direct exchange or by proton removal. The extents of ion association are found to be greater for the cobalt(III) than for the chromium(III) system, increasing with the amount of dioxin in the solvent mixture.     

Forces between a Rigid Probe Particle and a Liquid Interface

The effect of disjoining pressure between a rigid spherical probe particle (attached to an AFM cantilever) and a liquid interface (e.g., oil/water or air/water) is treated in an analytic manner to describe the total force F exerted on the probe as a function of the distance X of the probe from the rigid substrate (AFM stage) on which the liquid interface resides. Two cases (i) a flat interface under gravity and (ii) a drop whose size is sufficiently small that gravity can be neglected have been examined. A simple numerical algorithm is given for computing F(X) (the AFM observable) from a given form for the disjoining pressure. Numerical results are displayed for electrostatic probe/interface interactions which reveal the linear compliance regime experimentally observed in AFM experiments on these systems. The slope of the linear compliance regime is shown to be a function of the properties of the interface (capillary length, particle radius, drop size, contact angle of drop on rigid substrate etc.). Copyright 2001 Academic Press.     

Novel Chiral Aminophosphine Ligand:Synthesis and Application in Saymmetric Catalytic Hydrogenation Reaction

A new chiral aminophosphine ligand 6,6′-dimethoxy-2,2′-bis(diphenylphosphinoamino)biphenyl(DMBDPPABP) was prepared and its rhodium complex was found to be an effective catalyst for the asymmetric hydrogenation of amidoacrylic acid and its dervatives.The effects of solvent and reaction temperature on enantioselectivity were also studied.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Ruthenium‐catalyzed synthesis of quinolines via reductive heteroannulation of nitroarenes with 3‐amino‐1‐propanols

Nitroarenes are reductively cyclized with 3‐amino‐1‐propanols in dioxane/H₂O in the presence of a ruthenium catalyst and tin(II) chloride dihydrate together with isopropanol to afford the corresponding quinolines. A reaction pathway involving initial reduction of nitroarenes to anilines, propanol group transfer from 3‐amino‐1‐propanols to anilines, N‐alkylation of anilines by 3‐anilino‐1‐propanols and heteroannulation of 1,3‐dianilinopropanes is proposed.     

Kinetics and mechanism of the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The kinetics of grafting a basic monomer, 2-(dimethylamino)-ethyl methacrylate (DMAEMA) to hydrocarbon substrates have been investigated. These systems were chosen as models for the grafting of a homopolymerizable monomer to polyolefins such as polyethylene. The reactions with squalane and n-eicosane were initiated by an organic peroxide, 2,5-dimethyl 2,5 dit-butylperoxy)-3-hexyne; grafting yields become significant at high reaction temperatures and low monomer concentrations. In squalane, the order of reaction with respect to monomer increased from about 1.1 for 0.22?0.44M DMAEMA to almost 2 at 0.69M DMAEMA; the order with respect to initiator was 0.56. The overall activation energy in the 130?160°C temperature range was, however, surprisingly low, 42±5 kJ mol^?1. When analytical data were used to separate the overall rate into those for grafting and homopolymerization, different kinetic paths were observed for the competing reactions. These results are interpreted in terms of two different mechanisms; intramolecular chain transfer plays an important role in grafting, while depropagation becomes a major factor in homopolymerization at temperatures above 150°C. © 1995 John Wiley & Sons, Inc.     

Multidimensional high performance liquid chromatography--capillary electrophoresis separation of a protein digest: an update

The trypsin digest of a mixture of two proteins, namely cytochrome c and myoglobin, was first separated in the first dimension by high-performance liquid chromatography (HPLC). Fractions from the HPLC were collected every 30s with the aid of a fraction collector into a 96-well microtiter plate. After concentration, all the collected fractions were analyzed simultaneaosly in the second dimension by a 96-array capillary electrophoresis system. The labeled peptides were detected by laser-induced fluorescence. An internal standard, allura red, was added to all the fractions, prior to capillary electrophoretic analysis. The internal standard serves two functions, migration time correction and signal intensity correction. The data are presented in two different formats, as an electropherogram of all the fractions and in a two-dimensional (2-D) format. The 2-D plot of the data shows the density of each spot, which corresponds to the concentration of the migrating peptides. The total experimental time for the HPLC and capillary electrophoretic analyses ist less than 1 h, which ist much faster than using 2-D slab-gel electrophoresis or single-capillary capillary electrophoresis.     

Self-assembled morphologies of monotethered polyhedral oligomeric silsesquioxane nanocubes from computer simulation

Self-assembly of functionalized nanoscale building blocks is a promising strategy for "bottom-up" materials design. Recent experiments have demonstrated that the self-assembly of polyhedral oligomeric silsesquioxane (POSS) "nanocubes" functionalized with organic tethers can be utilized to synthesize novel materials with highly ordered, complex nanostructures. We have performed molecular simulations for a simplified model of monotethered POSS nanocubes to investigate systematically how the parameters that control the assembly process and the resulting equilibrium structures, including concentration, temperature, tether lengths, and solvent conditions, can be manipulated to achieve useful structures via self-assembly. We report conventional lamellar and cylindrical structures that are typically found in block copolymer and surfactant systems, including a thermotropic order-order transition, but with interesting stabilization of the lamellar phase caused by the bulkiness and cubic geometry of the POSS nanocubes.     

Application of solid phase microextraction in the determination of paralytic shellfish poisoning toxins

A SPME-HPLC-post-column fluorescent derivatization method for the direct determination of saxitoxin (STX), the most potent paralytic shellfish poisoning (PSP) toxin, in water has been developed. Commercially available SPME devices with 50 microm Carbowax templated resin (CW/TPR) coating was found to be able to pre-concentrate STX from aqueous media. A special pre-conditioning treatment of soaking the SPME coating in 0.1 M NaOH solution significantly improved the extraction efficiency. The optimal pH for the SPME process is 8.1 and the equilibration time is 40 min. The partition coefficient, K, of the distribution of STX between the SPME coating and the aqueous media was measured to be 2.99 +/- 0.04 x 10(3). Extracted toxin on the SPME stationary phase was difficult to be desorbed by the HPLC mobile phase under dynamic desorption mode. A static ion-pairing desorption technique using a desorption solvent mixture of 20 mM sodium 1-heptanesulfonate in 30% aqueous acetonitrile acidified with 50 mM sulfuric acid was developed to overcome this problem. The method detection limit and repeatability achieved by this SPME-HPLC method were 0.11 ng ml(-1) and 3.7%, respectively, with a sample volume of just 5 ml of water. This analytical method is adequate for the monitoring of the PSP toxin in fresh/drinking waters. However, serious interference was observed when this technique was applied to saline water samples. This is probably due to competition of sodium ions with the cationic STX for absorption into the SPME stationary phase.