Synthesis and chromatographic properties of a novel chiral stationary phase derived from heptakis(6-azido-6-deoxy-2,3-di-O-phenylcarbamoylated)-beta-cyclodextrin immobilized onto amino-functionalized silica gel via multiple urea linkages

A novel chiral stationary phase (PPHCDN7) was prepared by immobilization of heptakis(6-azido-6-deoxy-2,3-di-O-phenylcarbamoylated)-β-cyclodextrin (PPHCD) onto the surface of amino-functionalized silica gel via multiple urea linkages derived from an extended application of the Staudinger reaction. A wide range of structurally divergent racemic drugs and other compounds were successfully separated into their enantiomers under both normal and reversed-phase conditions. β-Adrenergic blockers and racemic tertiary, secondary and primary amines were readily separated using a mixture of methanol and aqueous triethylammonium acetate buffer. The optimal pH value for the separation falls in the range of 4.65 to 6.30. With atropine and isoproterenol, good enantioseparations with separation factors of >5 were easily attainable.     

Enhanced Optical Image Verification Based on Joint Transform Correlator Adopting Fourier Hologram

In this paper two new architectures for optical image verification are proposed. Both architectures are based on conventional joint transform correlators (JTCs) adopting a Fourier hologram and can significantly improve the recovered image quality. First, an input phase-only function is Fourier transformed and then interferes with a reference wave that is diffracted from a plane wave incident on another random phase mask. Second, two phase-only functions are placed at the two input sides of a beamsplitter such that the interference pattern of their Fourier transforms can be detected. To obtain a predefined target image in the output plane, one of the input phase functions is iteratively retrieved by the use of the projection onto constraint sets algorithm. Simulation results show that the less mean squared error and better image quality are obtained for both the binary and grayscale images.     

Accuracy and variability of acoustic measures of voicing onset

Five commonly used methods for determining the onset of voicing of syllable-initial stop consonants were compared. The speech and glottal activity of 16 native speakers of Cantonese with normal voice quality were investigated during the production of consonant vowel (CV) syllables in Cantonese. Syllables consisted of the initial consonants /ph/, /th/, /kh/, /p/, /t/, and /k/ followed by the vowel /a/. All syllables had a high level tone, and were all real words in Cantonese. Measurements of voicing onset were made based on the onset of periodicity in the acoustic waveform, and on spectrographic measures of the onset of a voicing bar (f0), the onset of the first formant (F1), second formant (F2), and third formant (F3). These measurements were then compared against the onset of glottal opening as determined by electroglottography. Both accuracy and variability of each measure were calculated. Results suggest that the presence of aspiration in a syllable decreased the accuracy and increased the variability of spectrogram-based measurements, but did not strongly affect measurements made from the acoustic waveform. Overall, the acoustic waveform provided the most accurate estimate of voicing onset; measurements made from the amplitude waveform were also the least variable of the five measures. These results can be explained as a consequence of differences in spectral tilt of the voicing source in breathy versus modal phonation.     

On-line identification of lysergic acid diethylamide (LSD) in tablets using a combination of a sweeping technique and micellar electrokinetic chromatography/77 K fluorescence spectroscopy

This work describes a novel method for the accurate determination of lysergic acid diethylamide (LSD) in tablets. A technique involving sweeping-micellar electrokinetic chromatography (MEKC) was used for the initial on-line concentration and separation, after which a cryogenic molecular fluorescence experiment was performed at 77 K. Using this approach, not only the separation of LSD from the tablet extract was achieved, but on-line spectra were readily distinguishable and could be unambiguously assigned. The results are in agreement with analyses by gas chromatography-mass spectrometry (GC-MS). Thus, this method, which was found to be accurate, sensitive and rapid, has the potential for use as a reliable complementary method to GC-MS in such analyses.     

Preparation of phosphinated bisphenol from acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane and its application in high‐performance cyanate esters

We reveal a route for the preparation of phosphinated bisphenol, 1,1‐bis(4‐hydroxyphenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (2) , via a one‐pot reaction of 1,1,1‐tris(4‐hydroxyphenyl)ethane and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) in the catalysis of p‐toluenesulfonic acid. A two‐step reaction mechanism, acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane followed by nucleophilic addition of DOPO, is proposed for the synthesis. Based on (2) , a dicyanate ester derivative, 1,1‐bis(4‐cyanatophenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (3) was prepared and co‐cured with a commercially available dicyanate ester, the dicyanate ester of bisphenol A (BACY). Experimental data show that incorporating (3) into BACY enhances the flame retardancy and dielectric properties with little penalty to the thermal properties. A thermoset with T_g 274 °C, coefficient of thermal expansion (CTE) 49 ppm/°C, D_k 3.04 (1 GHz), T_d (5%,) N₂: 435 °C, air: 424 °C, and UL‐94 V‐0 rating can be achieved via this approach. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Multiaxial deformation of polyethylene and polyethylene/clay nanocomposites: in situ synchrotron small angle and wide angle X‐ray scattering study

A unique in situ multiaxial deformation device has been designed and built specifically for simultaneous synchrotron small angle X‐ray scattering (SAXS) and wide angle X‐ray scattering (WAXS) measurements. SAXS and WAXS patterns of high‐density polyethylene (HDPE) and HDPE/clay nanocomposites were measured in real time during in situ multiaxial deformation at room temperature and at 55 °C. It was observed that the morphological evolution of polyethylene is affected by the existence of clay platelets as well as the deformation temperature and strain rate. Martensitic transformation of orthorhombic into monoclinic crystal phases was observed under strain in HDPE, which is delayed and hindered in the presence of clay nanoplatelets. From the SAXS measurements, it was observed that the thickness of the interlamellar amorphous region increased with increasing strain, which is due to elongation of the amorphous chains. The increase in amorphous layer thickness is slightly higher for the nanocomposites compared to the neat polymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Conformation dependence of DNA electrophoretic mobility in a converging channel

The electrophoresis of λ‐DNA is observed in a microscale converging channel where the center‐of‐masses trajectories of DNA molecules are tracked to measure instantaneous electrophoretic (EP) mobilities of DNA molecules of various stretch lengths and conformations. Contrary to the usual assumption that DNA mobility is a constant, independent of field and DNA length in free solution, we find DNA EP mobility varies along the axis in the contracting geometry. We correlate this mobility variation with the local stretch and conformational changes of the DNA, which are induced by the electric field gradient produced by the contraction. A “shish‐kebab” model of a rigid polymer segment is developed, which consists of aligned spheres acting as charge and drag centers. The EP mobility of the shish‐kebab is obtained by determining the electrohydrodynamic interactions of aligned spheres driven by the electric field. Multiple shish‐kebabs are then connected end‐to‐end to form a freely jointed chain model for a flexible DNA chain. DNA EP mobility is finally obtained as an ensemble average over the shish‐kebab orientations that are biased to match the overall stretch of the DNA chain. Using physically reasonable parameters, the model agrees well with experimental results for the dependence of EP mobility on stretch and conformation. We find that the magnitude of the EP mobility increases with DNA stretch, and that this increase is more pronounced for folded conformations.     

Numerical experiments with several variant WENO schemes for the Euler equations

Numerical experiments with several variants of the original weighted essentially non‐oscillatory (WENO) schemes (J. Comput. Phys. 1996; 126 :202–228) including anti‐diffusive flux corrections, the mapped WENO scheme, and modified smoothness indicator are tested for the Euler equations. The TVD Runge–Kutta explicit time‐integrating scheme is adopted for unsteady flow computations and lower–upper symmetric‐Gauss–Seidel (LU‐SGS) implicit method is employed for the computation of steady‐state solutions. A numerical flux of the variant WENO scheme in flux limiter form is presented, which consists of first‐order and high‐order fluxes and allows for a more flexible choice of low‐order schemes. Computations of unsteady oblique shock wave diffraction over a wedge and steady transonic flows over NACA 0012 and RAE 2822 airfoils are presented to test and compare the methods. Various aspects of the variant WENO methods including contact discontinuity sharpening and steady‐state convergence rate are examined. By using the WENO scheme with anti‐diffusive flux corrections, the present solutions indicate that good convergence rate can be achieved and high‐order accuracy is maintained and contact discontinuities are sharpened markedly as compared with the original WENO schemes on the same meshes. Copyright © 2008 John Wiley & Sons, Ltd.     

Self‐assembly of H‐bonded side‐chain and cross‐linking copolymers containing diblock‐copolymeric donors and single/double H‐bonded light‐emitting acceptors

A series of diblock‐copolymers were synthesized through anionic polymerization of styrene and tert‐butyl methacrylate (tBuA) with different monomer ratios, and analogous block‐copolymeric derivatives (PS‐b‐PAA)s with monofunctional carboxylic acid groups were obtained by further hydrolyzation as hydrogen‐bonded (H‐bonded) proton donors. Via H‐bonded interaction, these diblock‐coplymeric donors (PS‐b‐PAA)s were incorporated with luminescent mono‐pyridyl/bis‐pyridyl acceptors to form single/double H‐bonded supramolecules, that is, H‐bonded side‐chain/cross‐linking copolymers, respectively. The supramolecular architectures formed by donor polymers and light‐emitting acceptors were influenced by the ratio of acid blocks in the diblock copolymeric donors and the type of single/double H‐bonded light‐emitting acceptors. Their thermal and luminescent properties can be adjusted by H‐bonds, and more than 100 nm of red‐shifted photoluminescence (PL) emissions were observed, which depend on the degrees of the H‐bonding interactions. Self‐assembled phenomena of amphiphilic dibolck copolymers and their H‐bonded complexes were confirmed by TEM micrographs, and supramolecular microphase separation of spherical micelle‐like morphology was demonstrated to affect the photophysical properties. Polymer light‐emitting diode (PLED) devices containing H‐bonded complexes showed electroluminescence (EL) emissions of 503–560 nm under turn‐on voltages of 7.5–9.0 V, maximum power efficiencies of 0.23–0.37 cd/A (at 100 mA/cm²), and maximum luminances of 318–519 cd/m² (around 25 V). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4685–4702, 2009