Preparation of a silicon micro-strip nuclear radiation detector by a two-step annealing process

The annealing process for boron implantation is a crucial step during large size nuclear radiation detector fabrication. It can reduce the lattice defects and the projection straggling. A two-step annealing process for boron implantation was developed instead of a one-step annealing process, and the reverse body resistance of a silicon micro-strip detector was significantly increased, which means that the performance of the detector was improved.     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.     

Effects of the δ meson on the direct Urca processes in neutron stars

In the framework of the relativistic mean field theory, the effects of the δ meson on the direct Urca (DURCA) processes are investigated. In a neutron star, the DURCA processes involving nucleons, Λ and Ξ^- can take place while the process involving the Ξ⁰ can not. With the inclusion of the δ meson, the threshold densities for the DURCA processes become lower. With the δ included, the threshold neutron star mass for the DURCA process among nucleons and electrons becomes smaller while the threshold masses for the processes involving hyperons become larger. When the δ meson is included, the total neutrino emissivity remarkably increases in the density range of 0.32--0.41 fm^-3. The total neutrino luminosity increases with the neutron star mass first and then decreases. The neutrino luminosity gets larger with the inclusion of the δ meson. The cooling of the EXO0748-676 is sensitive to the isovector scalar interaction.     

Fast computation of observed cross section for ψ′ → PP decays

It has been conjectured that the relative phase between strong and electromagnetic amplitudes is universally -90° in charmonium decays. ψ′ decaying into a pseudoscalar pair provides a possibility to test this conjecture. However, the experimentally observed cross section for such a process is depicted by the two-fold integral, which takes into account the initial state radiative (ISR) correction and energy spread effect. Using the generalized linear regression approach, a complex energy-dependent factor is ...     

Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design

The construction of China Spallation Neutron Source (CSNS) has been initiated in Dongguan, Guangdong, China. Thus a detailed radiation transport analysis of the shutter neutron beam stop is of vital importance. The analyses are performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method. The target of calculations is to optimize the neutron beamline shielding design to guarantee personal safety and minimize cost. Successful elimination of the primary ray effects via the two-dimensional uncollided flux and the first collision source methodology is also illustrated. Two-dimensional dose distribution is calculated. The dose at the end of the neutron beam line is less than 2.5 μSv/h. The models have ensured that the doses received by the hall staff members are below the standard limit required.     

Design and end chamfer simulation of PEFP beam line curved dipole magnets

The design, fabrication and field measurement of 11 DC curved dipole magnets for the PEFP Beam Line have been completed. In this paper, a design method for a complex end chamfer using OPERA-3D is proposed. The conventional method for estimating chamfer shape is extended and applied to a curved dipole magnet by a coordinate transformation. Using the interface with CAD software, the complex end chamfer is modeled and fully determined by 3D simulation to meet the field uniformity requirement. The magnetic field measurement results are in good agreement with the simulation. The design considerations, field simulation results, end chamfer development process and measurement results are presented in detail.     

GENERALIZED OPERATORS AND OPERATOR-VALUED DISTRIBUTIONS IN QUANTUM FIELD THEORY

The relation between generalized operators and operator-valued distributions is discussed so that these two viewpoints can be used alternatively to explain quantum fields.     

REPRESENTATIONS OF THE TWO PARAMETER DEFORMATION OF THE VIRASORO ALGEBRA

This paper constructs a class of Harish-Chandra modules with multiplicity ≤1 of the two parameter deformation of Virasoro algebra and proves a classification theorem.     

ANALYSIS OF AN SI EPIDEMIC MODEL WITH NONLINEAR TRANSMISSION AND STAGE STRUCTURE

A disease transmission model of SI type with stage structure is formulated. The stability of disease free equilibrium, the existence and uniqueness of an endemic equilibrium, the existence of a global attractor are investigated.     

EXISTENCE AND DECAY OF WEAK SOLUTIONS TO DEGENERATE DAVEY-STEWARTSON EQUATIONS

In this paper, the authors consider a system of degenerate Davey-Stewartson equations. They prove the global existence of weak solutions in some weighted function spaces and the decay of weak solutions in some anisotropic spaces for appropriate initial data.