Proton Conductivities of Graphene Oxide Nanosheets: Single,Multilayer, and Modified Nanosheets

Proton conductivities of layered solid electrolytes can be improved by minimizing strain along the conduction path. It is shown that the conductivities (σ) of multilayer graphene oxide (GO) films (assembled by the drop‐cast method) are larger than those of single‐layer GO (prepared by either the drop‐cast or the Langmuir‐Blodgett (LB) method). At 60 % relative humidity (RH), the σ value increases from 1×10⁻⁶ S cm⁻¹ in single‐layer GO to 1×10⁻⁴ and 4×10⁻⁴ S cm⁻¹ for 60 and 200 nm thick multilayer films, respectively. A sudden decrease in conductivity was observed for with ethylenediamine (EDA) modified GO (enGO), which is due to the blocking of epoxy groups. This experiment confirmed that the epoxide groups are the major contributor to the efficient proton transport. Because of a gradual improvement of the conduction path and an increase in the water content, σ values increase with the thickness of the multilayer films. The reported methods might be applicable to the optimization of the proton conductivity in other layered solid electrolytes.     

Tetraspanin CD9 modulates ADAM17-mediated shedding of LR11 in leukocytes

LR11, also known as SorLA or SORL1, is a type-I membrane protein from which a large extracellular part, soluble LR11 (sLR11), is released by proteolytic shedding on cleavage with a disintegrin and metalloproteinase 17 (ADAM17). A shedding mechanism is presumed to have a key role in the functions of LR11, but the evidence for this has not yet been demonstrated. Tetraspanin CD9 has been recently shown to regulate the ADAM17-mediated shedding of tumor necrosis factor-α and intercellular adhesion molecule-1 on the cell surface. Here, we investigated the role of CD9 on the shedding of LR11 in leukocytes. LR11 was not expressed in THP-1 monocytes, but it was expressed and released in phorbol 12-myristate 13-acetate (PMA)-induced THP-1 macrophages (PMA/THP-1). Confocal microscopy showed colocalization of LR11 and CD9 proteins on the cell surface of PMA/THP-1. Ectopic neo-expression of CD9 in CCRF-SB cells, which are LR11-positive and CD9-negative, reduced the amount of sLR11 released from the cells. In contrast, incubation of LR11-transfected THP-1 cells with neutralizing anti-CD9 monoclonal antibodies increased the amount of sLR11 released from the cells. Likewise, the PMA-stimulated release of sLR11 increased in THP-1 cells transfected with CD9-targeted shRNAs, which was negated by treatment with the metalloproteinase inhibitor GM6001. These results suggest that the tetraspanin CD9 modulates the ADAM17-mediated shedding of LR11 in various leukemia cell lines and that the association between LR11 and CD9 on the cell surface has an important role in the ADAM17-mediated shedding mechanism.     

Improved 2-nitrobenzenesulfenyl method: optimization of the protocol and improved enrichment for labeled peptides

We have developed the NBS (2-nitrobenzenesulfenyl) method, a quantitative proteome analysis method utilizing stable isotope labeling followed by mass spectrometry. The potential of this method was reported previously, and the procedure has now been further optimized. Here, we describe a procedure utilizing urea or guanidine hydrochloride as a protein denaturant, in conjunction with an improved chromatographic enrichment method for the NBS-labeled peptides using a phenyl resin column. By using this new protocol, both sample loss throughout the protocol and the elution of unwanted unlabeled peptides can be minimized, improving the efficiency of the analysis significantly.     

Aqueous chromatography system using pH- and temperature-responsive stationary phase with ion-exchange groups

We report on the development of a novel analytical HPLC technique of nonsteroidal anti-inflammatory drugs (NSAIDs), such as ibuprofen, ketoprofen and naproxen, with an isocratic aqueous mobile phase. In this study, we designed a new pH- and temperature-responsive copolymer of N-isopropylacrylamide (NIPAAm), butyl methacrylate (BMA) and N,N-dimethylaminopropylacrylamide (DMAPAAm). The copolymer was modified with cross-linked poly(NIPAAm-co-BMA-co-DMAPAAm) (IBD) hydrogel on to aminopropyl silica beads, and the products were evaluated as HPLC packing materials for an ion-exchange- and temperature-responsive chromatography. The property of the surface of the stationary phase was altered from hydrophilic to hydrophobic, and from charged to non-charged by changes in the temperature and pH. In addition, it is possible that ion-exchange groups can appear or be hidden on the polymer chain surface by temperature changes. The interactions of NSAIDs with this stationary phase were controlled by the temperature and the pH with a constant aqueous mobile phase. PH- and temperature-responsive chromatography is expected to be useful for the separation of pharmaceuticals and biomolecules.     

Synthesis and properties of oxo-carboxylato- and dioxo-bridged diosmium complexes of tris(2-pyridylmethyl)amine

A series of oxo-bridged diosmium complexes with tpa ligand (tpa = tris(2-pyridylmethyl)amine) are synthesized. The hydrolytic reaction of the mononuclear osmium complex [Os(III)Cl(2)(tpa)]PF(6) in aqueous solution containing a sodium carboxylate yields a μ-oxo-μ-carboxylato-diosmium(III) complex, [Os(III)(2)(μ-O)(μ-RCOO)(tpa)(2)](PF(6))(3) (R = C(3)H(7) (1), CH(3) (2), or C(6)H(5) (3)). One-electron oxidation of 1 with (NH(4))(2)Ce(IV)(NO(3))(6) gives a mixed-valent [Os(III)Os(IV)(μ-O)(μ-C(3)H(7)COO)(tpa)(2)](PF(6))(4) complex (4). A mixed-valent di-μ-oxo-diosmium complex, [Os(III)Os(IV)(μ-O)(2)(tpa)(2)](PF(6))(3) (5), is also synthesized from 1 in an aerobic alkaline solution (pH 13.5). All the complexes exhibit strong absorption bands in a visible-near-infrared region based on interactions of the osmium dπ and oxygen pπ orbitals of the Os-O-Os moiety. The X-ray crystallographic analysis of 1, 3, and 4 shows that the osmium centers take a pseudo-octahedral geometry in the μ-oxo-μ-carboxylato-diosmium core. The mixed-valent osmium(III)osmium(IV) complex 4 has a shorter osmium-oxo bond and a larger osmium-oxo-osmium angle as compared with those of the diosmium(III) complex 1 having the same bridging carboxylate. Crystal structure of 5 reveals that the two osmium ions are bridged by two oxo groups to give an Os(2)(μ-O)(2) core with the significantly short osmium-osmium distance (2.51784(7) ?), which is indicative of a direct osmium-osmium bond formation with the bond order of 1.5 (σ(2)π(2)δ(2)δ*(2)π*(1) configuration). In the electrochemical studies, the μ-oxo-μ-carboxylato-diosmium(III) complexes exhibit two reversible Os(III)Os(III)/Os(III)Os(IV) and Os(III)Os(IV)/Os(IV)Os(IV) oxidation couples and one irreversible redox wave for the Os(III)Os(III)/Os(II)Os(III) couple in CH(3)CN. The irreversible reductive process becomes reversible in CH(3)CN/H(2)O (1:1 Britton-Robinson buffer; pH 5-11), where the {1H(+)/2e(-)} transfer process is indicated by the plot of the redox potentials against the pH values of the solution of 1. Thus, the μ-oxo-μ-butyrato-diosmium(III) center undergoes proton-coupled electron transfer to yield a μ-hydroxo-μ-butyrato-diosmisum(II) species. The di(μ-oxo) complex 5 exhibits one reversible Os(III)Os(IV)/Os(IV)Os(IV) oxidation process and one reversible Os(III)Os(IV)/Os(III)Os(III) reduction process in CH(3)CN. The comproportionation constants K(com) of the Os(III)Os(IV) states for the present diosmium complexes are on the order of 10(19). The values are significantly larger when compared with those of similar oxo-bridged dimetal complexes of ruthenium and rhenium.     

Precise determination of dissolved silica in seawater by ion-exclusion chromatography isotope dilution inductively coupled plasma mass spectrometry

Ion exclusion chromatograph (IEC) isotope dilution (ID) inductively coupled plasma mass spectrometry (ICP–MS) (IEC–ID–ICP–MS) was developed for measurement of dissolved silica in seawater, which was applied to production of certified reference materials (CRMs) of three concentration levels of nutrients (high, medium and low levels). IEC–ICP–MS has been employed to separate dissolved silica from seawater matrix. In the present study, in order to solve substantial problems due to spectral interference in ICP–MS and to improve the accuracy of IEC–ICP–MS beyond standard addition or conventional calibration methods, ID method was coupled with ICP-sector field mass spectrometry (operated under medium resolution,i.e., m/Δm = 4000). In addition, effects of various operating parameters in ICP–MS on a silicon background level were also investigated to obtain lower background equivalent concentration (BEC). As a result, 3 ng g⁻¹ of the BEC and 0.5 % of relative standard uncertainties were achieved in the analyses of dissolved silica in seawater samples at concentration levels from 4.0 mg kg ^-1 to 0.8 mg kg⁻¹ as silicon. The developed method was successfully validated by analyses of an artificial seawater containing a known amount of silicate and the seawater certified reference material MOOS-2 produced by the National Research Council Canada.     

Chiral sulfoxides as neutral coordinate-organocatalysts in asymmetric allylation of N-acylhydrazones using allyltrichlorosilanes

Sulfoxides were first introduced to the allylation of N-acylhydrazones with allyltrichlorosilanes as effective neutral coordinate-organocatalysts (NCOs). Both high diastereo- and enantioselectivity were attained when optically active chiral sulfoxides were used. Asymmetric crotylations using (Z)- and (E)-crotyltrichlorosilanes showed a high level of stereospecificity (Z --> anti and E --> syn) with high enantioselectivity.     

Cloud point extraction of iron(III) and vanadium(V) using 8-quinolinol derivatives and Triton X-100 and determination of 10(-7)moldm(-3) level iron(III) in riverine water reference by a graphite furnace atomic absorption spectroscopy

The cloud point extraction behavior of iron(III) and vanadium(V) using 8-quinolinol derivatives (HA) such as 8-quinolinol (HQ), 2-methyl-8-quinolinol (HMQ), 5-butyloxymethyl-8-quinolinol (HO₄Q), 5-hexyloxymethyl-8-quinolinol (HO₆Q), and 2-methyl-5-octyloxymethyl-8-quinolinol (HMO₈Q) and Triton X-100 solution was investigated. Iron(III) was extracted with HA and 4% (v/v) Triton X-100 in the pH range of 1.70-5.44. Above pH 4.0, more than 95% of iron(III) was extracted with HQ, HMQ, and HMO₈Q. Vanadium(V) was also extracted with HA and 4% (v/v) Triton X-100 in the pH range of 2.07-5.00, and the extractability increased in the following order of HMQ < HQ < HO₄Q < HO₆Q. The cloud point extraction was applied to the determination of iron(III) in the riverine water reference by a graphite furnace atomic absorption spectroscopy. When 1.25 × 10⁻³ M HMQ and 1% (v/v) Triton X-100 were used, the found values showed a good agreement with the certified ones within the 2% of the R.S.D. Moreover, the effect of an alkyl group on the solubility of 5-alkyloxymethyl-8-quinolinol and 2-methyl-5-alkyloxymethyl-8-quinolinol in 4% (v/v) Triton X-100 at 25 °C was also investigated.