Two New Steroidal Saponins from Tacca plantaginea

Two new C27 steroidal glycosides, named taccaoside A(1) and B(2), were isolated from the traditional Chinese herb Tacca plantaginea. The spectroscopic and chemical evidences revealed their structures to be 26-O-β-D-glucopyranosyl-(25R)-3β,26-dihydroxy furost-5,20-diene-3-O-[α-L-rhamnopyranosyl(1→2)]-[α-L-rhamnopyranosyl(1→3)]-β-D-glucopyranoside(1) and 26-O-β-D-glucopyranosyl-(25R)-3β,26-dihydroxy furost-5,20-diene-3-O-[α-L-rhamnopyranosyl-(1→2)]-[β-D-glucopyranosyl(1→3)-α-L-rhamnopyranosyl(1→3)]-β-D-glucopyranoside(2),respectively.     

Temporal Response of SERS to the Potential for 4-Cyanopyridine Adsorbed on Ag Electrode

Time-resolved surface-enhanced Raman scattering (SERS) was applied to study the response of Raman bands from 4-cyanopyridine (PyCN) adsorbed on a Ag electrode to variation of the potential; the temporal resolution was 0.1 s. The response of the SERS signals of PyCN was instantaneous to the oxidation potential of Ag electrode. However, delay of the SERS signals was observed while AgCl was reducing. The decay and growth of the SERS bands look place within 1 s in the cases of desorption and adsorption of PyCN on the electrode. It took much longer for PyCN to alter from one adsorption geometry to another on the electrode.     

硅胶担载四核羰基钴催化剂的EXAFS和IR研究

本文以透射法EXAFS和IR等手段研究了四核羰基钴金属簇Co_4(CO)_(10)(PPh)_2担载在SiO_2上以后及用于烯烃醛化反应前后的变化,确定了相应的结构参数并探讨了催化活性与结构的关系。     

Adsorption Kinetic Characteristics of H2S on Activated Carbon

This study compared H₂S adsorption kinetic parameters in both grain adsorption and column adsorption systems. Results indicated that when the nondimensional mass transfer parameter for adsorption column design was included, the axial dispersion (Pe > 1, < 1) and external film resistance (B 1) could be neglected, the fluid viscosity effect was small (Sc = 0.76), and the adsorbate affinity was fine (). Surface and pore diffusion controlled the adsorbent and fluid mass transfer. In addition, spent activated carbon could be treated by a thermal process and then impregnated with NaOH. After the pretreatment, the spent activated carbon could be used for H₂S adsorption. Furthermore, we also propose that the H₂S adsorption reaction on the carbon is due to the formation of sulfur crystals.     

Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

Kinetic deoxyribose degradation assay and its application in assessing the antioxidant activities of phenolic compounds in a Fenton-type reaction system

Pro-oxidant properties of phenolic antioxidants, which are derived from their iron recycling reactivity, render the traditional deoxyribose degradation assay invalid to assess the hydroxyl radical-scavenging activity in Fenton-type reaction systems. In the present paper, we studied in detail the interactions between iron and phenolic compounds, and established a kinetic deoxyribose method by taking advantage of the distinct difference between the completion time of Fenton reaction and that of the iron-reducing process. With the newly established kinetic method, we investigated the effects of phenolics on hydroxyl radical formation in a Fenton-type system and determined successfully the second rate constants of hydroxyl radical-scavenging reactions. The site-specific and non-site-specific hydroxyl radical-scavenging ability suggested that both direct hydroxyl radical-scavenging potency and iron-chelating capacity accounted for their inhibitory effects on deoxyribose oxidation degradation. This method, more simple, time saving, and applicative than the traditional deoxyribose assay, produces as accurate results (RSD<0.05, with dynamic range from 7.5 to 575 μM) as typical methods, such as radiolysis technology, and may be of significance in evaluating and screen the hydroxyl radical-scavenging antioxidants.     

Monodisperse chloromethyl-functionalized macroporous polymer particles by seeded polymerization in aqueous media

This study presents a method to produce monodisperse chloromethyl-functionalized macroporous poly(styrene-co-divinylbenzene) polymer particles by seeded polymerization in aqueous media. We observed that the molecular structure of polystyrene seed particles, the composition of the secondary monomer mixtures, and the type of solvents were very important factors that determine the morphology and porosity of the final particles. This study proposes that the molecular chemistry of polystyrene seed polymers, increasing molecular weight or crosslinking, is another factor that can control the porosity of the final particles. Also, the selection of a poor solvent was effective in forming the larger surface area. In this study, it was confirmed that the chloromethyl groups introduced on the surface of porous particles were quantified chemically and their effective incorporation had a close relationship with the surface area.     

Preparation of '2,('3)-O-Acyl-pCpA derivatives as substrates for T4 RNA ligase-mediated “chemical aminoacylation”

The synthesis of '2('3)-O-(amino)acyl-pCpA derivatives is described and the products are characterized chemically and as substrates for T4 RNA ligase in the presence of E. coli tRNA ^phe-C_OH. The modified (N-acetylammo)acyl-tRNA's so derived are characterized by their chromatographic and biochemical properties, and by their ability to act as P-site tRNA donors in the peptidyltransferase reaction.     

A Highly diastereoselective synthesis of (1R)-(+)-camphor-based chiral allenes and their asymmetric hydroboration-oxidation reactions

Synthesis of camphor derived chiral allenes and their hydroboration-oxidation reactions are described. Reaction of (1R)-(+)-camphor with alkynyllithium followed by the reduction of the resulted propargyl alcohol derivatives using AlH3 furnished chiral allenes 2a-g in excellent yields with high diastereoselectivity. Reduction of the propargyl alcohols with aluminum hydride proceeded through selective intermolecular anti-addition of hydride ion. The stereochemistry of the chiral allenes 2 was assigned based on lanthanide shift studies and chemical correlations. Diastereoselectivity was observed in the hydroboration-oxidation of 2 which produced a mixture of (E,R) and (E,S) stereoisomers in a ratio of 6:1 to 18:1.     

A simple method for assigning multiple immunogens to their protein on a two-dimensional blot and its application to asthma-causing allergens

A "one-step" procedure, that not only removes the color and blocking proteins used in the colorimetric immunodetection step but also stains the proteins originally on the blot, is presented. Following immunostaining and recording of immunoreactive spots, the blot was allowed to air-dry overnight (or longer) at room temperature and then counterstained with a colloidal gold solution. This "air-drying" process apparently altered the affinity of the blocking proteins (and possibly other proteins added subsequently to the blotting step) towards the nitrocellulose membrane causing them to be removed by the acidic colloidal gold solution while the "blotted" proteins were being stained. The sensitivity of this counterstained blot was comparable to that of the blot without going through the immunodetection process. Since both immunodetection and protein staining were carried out on the same blot, this allowed easy identification of many immunoreactive spots to their corresponding proteins when the two profiles were superimposed. Using this procedure, we have detected 25 immunoreactive spots (or allergens) from the whole body extract of the German cockroach (Blattella germanica) that contribute to asthma and assigned them to their corresponding proteins on a two-dimensional (2-D) protein map. The apparent Mr and pI for each of the allergens were determined. We have also located one of the major cockroach allergens, Bla g 5 (glutathione S-transferase). Two-dimensional zymography revealed the presence of ten gelatinase-type proteolytic enzymes. Only one of the ten proteases comigrated with the immunoreactive proteins indicating that unlike other allergen-producing systems, most of the cockroach allergens do not possess protease activity.