Nonbonded P···P and P···Se Interactions in Naphthalene 1,8-Positions: Role of Lone-Pair Orbitals

The lone pair-lone pair repulsion plays an important role in the nonbonded P;;;P interaction in naphthalene 1,8-positions. The conformations around P and Se in 8-(PhSe)-1-(Ph 2 P=O)C 10 H 6 are determined by the attractive O;;;Se--C 3c-4e type interaction. The P;;;Se interaction in the 1,8-positions is also discussed.     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Probe Design for the Effective Fluorescence Imaging of Intracellular RNA

Over the past two decades, the spatiotemporal analysis of fluorescently labeled single RNA species has provided a broad insight into the synthesis, localization, degradation, and transport of RNA. To elucidate the dynamic behavior of functional RNAs in living cells, researchers throughout the world have proposed numerous fluorometric strategies for intracellular RNA imaging. Because, like most other biological molecules, RNA is intrinsically nonfluorescent, the development of methods for the labeling of RNAs of interest with fluorescent molecules is essential. Several artificial tag sequences have been attached onto the 3′ end of target RNAs and used as scaffolds for interacting with their fluorescent counterparts. In this Personal Account, we focus on the methods that have been developed to show how RNAs expressed in cells can be labeled and visualized by fluorescent proteins, small molecules, or nucleic acids. Each of these methods is designed to increase the sensitivity and specificity for imaging or to decrease the background fluorescence.     

Linear Multiselenium Interactions in Dicationic Oligomers of 1,5‐(Diselena)canes: Behavior of Semc σ(mcc‐nee) (6≤mc≤16) Elucidated with QTAIM Dual Functional Analysis

Invited for this month''s cover picture is the group of Dr. Satoko Hayashi at Faculty of Systems Engineering and Chemistry at Wakayama University. The cover picture shows the linear Se₁₆ σ(16c–30e) interactions, illustrated by the molecular graph type on the optimized structure of the dicationic octamer of 1,5‐(diselena)cane. HOMO‐1 of ψ₄₆₂ is drawn on the structure, which is located predominantly on the Se atoms. The optimized structure is stable, due to the nice engagement between the (CH₂)₃ moieties. The contour maps of ρ(r) are also drawn on the molecular C _s planes of the dicationic dimer and trimer to demonstrate clearly the existence of the interactions between Se atoms. Read the full text of their Full Paper at 10.1002/open.202100017.

“… To improve the causality of experimental results, we have proposed a new concept, called “Keisan‐sendo…” Find out more about the story behind the front cover research at 10.1002/open.202100017.     

Selective detection of polyaromatic hydrocarbons on diesel exhaust particles using sputtered neutral mass spectrometry

Aiming for the highly sensitive analysis of aromatic hydrocarbons in organic mixtures, selective ionization using an ultraviolet laser ionization technique was examined for the determination of sputtered neutral species on organic surfaces. The mass spectrum of a model mixture containing pyrene and n‐alkane showed that only pyrene was ionized and detected, whereas a mass spectrum without laser irradiation, i.e. in the case of secondary ion mass spectrometry, was dominated by many n‐alkane fragment peaks. This technique was applied for the detection of polyaromatic hydrocarbons adsorbed on diesel exhaust particles. Two kinds of polyaromatic hydrocarbons were clearly detected because many aliphatic fragment signals were suppressed by means of ultraviolet laser ionization. Copyright © 2013 John Wiley & Sons, Ltd.     

Electro-optic effect,propagation loss,and switching speed in polymers containing nano-sized droplets of liquid crystal

Polymers containing droplets of liquid crystal smaller than 100 nm, which have good transparency and easily form films, were prepared under various conditions to evaluate their potential as electro-optic materials for waveguide-type devices. By varying the liquid crystal concentration and the strength of the UV irradiation causing photo-induced phase separation of the droplets, we were able to control the droplet size and density. We have clarified how the birefringence generated in an applied electric field, switching speed, and optical loss of light propagating in the film depend on droplet size and density. Polymer materials having a large electro-optic effect (δn = 0.001 at 8 V μm^-1), low propagation loss (~2.5 dB cm^-1), and fast response time (~10 μs) have been developed.     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Partial crystalline transformation of solvated cellulose IIII crystals, reproduced by theoretical calculations

In hot-water molecular dynamics simulation at 370 K, four cellulose III_I crystal models, with different lattice planes and dimensions, exhibited partial crystalline transformations of (1 ?1 0) chain sheets, in which hydroxymethyl groups were irreversibly rotated from gt into tg conformations, accompanied by hydrogen-bond exchange from the original O3–O6 to cellulose-I-like O2–O6 bonds. The final hydrogen-bond exchange ratio was about 95 % for some of the crystal models after 50 ns simulation. The corrugated (1 ?1 0) chain sheet was converted to a cellulose-I-like flat chain sheet with a slightly right-handed twist. The 3D structures of the three types of isolated chain sheet models were optimized using density functional theory calculations to compare their stabilities without crystal packing forces. The cellulose Iβ (1 0 0) models were more stable than the cellulose III_I (1 ?1 0) models. The optimized structure of cellulose III_I (1 0 0) models deviated largely from the initial sheet form. It was proposed to the crystalline transformation from cellulose III_I to Iβ that conversion of the chain sheet structure first take place, followed by sliding of the chain sheet along the fiber axis.     

Enormously extended π-electronic conjugation system of dimeric octaethylporphyrin transmitted with anthracene

Based on the fact that anthracene (Anth) possesses much higher similarity in electron-releasing ability to porphyrin nucleus than the other polyacenes, the dimeric octaethylporphyrin (OEP) derivatives 4 and 5 (OEP–Anth–OEP) were synthesized and their structure–property relationships were examined, as compared with related OEP dimers 1–3. Among them, the derivative 4 showed enormously high electronic communication between two terminal OEP rings, potentially providing a suitable unit of the electronic structure for molecular design of the OEP devices operating with less energy and with higher sensitivity to outside stimuli.