Divalent metal phosphonate coordination polymers constructed from a dipiperidine-based bisphosphonate ligand

The ligand 4,4'-dipiperidine-N,N'-bis(methylenephosphonic acid), H(4)L, has been reacted with divalent metal salts under solvothermal conditions to yield seven new metal phosphonate coordination polymers. The compounds have been characterized by elemental analyses and their structures determined by single-crystal X-ray diffraction. Zn(2)(L)(H(2)O)(2) and Co(2)(L)(H(2)O)(2) have (different) layered structures, while Mn(2)(L)(H(2)O)(3) has a chain motif. In these compounds, the N atoms of the ligand bind to the metal ions. α-Co(2)Cl(2)(H(2)L), formed from CoCl(2)·6H(2)O and H(4)L in ethanol, is also layered but the N atoms of the ligand are protonated. The Co atoms are tetrahedral, coordinated by three phosphonate oxygen atoms and a chloride ion. A polymorph of this compound, β-Co(2)Cl(2)(H(2)L), was obtained from a mixed ionic liquid under microwave irradiation. The primary difference between the polymorphs is the orientation of the phosphonate group relative to the dipiperidine. When reacted hydrothermally with Sn(II)C(2)O(4), H(4)L partially decomposes, producing phosphate ions which are incorporated into the structure of Sn(6)O(2)(H(2)L)(PO(4))(2)·4H(2)O. In this compound, the N atoms of the ligand are protonated, and two oxide anions are incorporated for charge balance. A second phase is obtained from the same reaction, which was determined to be Sn(7)O(L)(3). This compound has a layered structure which contains relatively large voids within the inorganic portion of the layer. These structures are discussed, as well as factors influencing the state of protonation in the final compounds. The choice of solvent and temperature were found to have a significant influence on the type of structure obtained.     

Elucidating the nature and reactivity of Ti ions incorporated in the framework of AlPO-5 molecular sieves. New evidence from 31P HYSCORE spectroscopy

The incorporation of Ti ions within the framework of aluminophosphate zeotype AlPO-5 and their chemical reactivity is studied by means of CW-EPR, HYSCORE, and UV-vis spectroscopies. Upon reduction, Ti(3+) ions are formed, which exhibit large (31)P hyperfine couplings, providing direct evidence for framework substitution of reducible Ti ions at Al sites.     

Cyclo[2]benzimidazole: luminescence turn-on sensing of anions

Cyclo[2]benzimidazole is a new host for anions that turns on its luminescence up to 150 fold upon binding. Photoexcited cyclo[2]benzimidazole undergoes an efficient non-radiative deactivation through an excited-state intramolecular proton-transfer (ESIPT) mechanism. Upon binding an anion, the ESIPT pathway is blocked, resulting in an increase in the luminescence efficiency.     

Catalytic asymmetric conjugate boration of α,β-unsaturated sulfones

The α,β-unsaturated sulfones are suitable activated olefins in catalytic asymmetric conjugate β-boration. These substrates undergo smooth conjugate addition of bis(pinacolato)diboron [B(2)(pin)(2)] catalyzed by nonracemic Cu(I)-diphosphine complexes to provide, upon subsequent oxidation, β-hydroxy sulfones in good yields and high enantiocontrol.     

Photoswitchable rotaxanes on gold nanoparticles

We studied rotaxanes that consisted of a molecular axle, with a photoactive 9-Aryl-9-methoxy-acridane moiety at one end, and a tetracationic ring of cyclobis(paraquat-p-phenylene) (CBQT(4+)). The aim of the study was to deposit the axle ends onto gold nanoparticles (AuNPs). First, we introduced thioctic acid into the axle molecules. Then, rotaxanes were deposited on AuNPs by two methods: 1) Pseudorotaxanes were deposited on the gold surface by forming rotaxanes with the AuNP as a terminator to prevent unthreading of the ring structure; and 2) a chain containing the thioctic ester was introduced into a complete rotaxane, and then it was deposited on the AuNP with the aid of an exchange process. The photoheterolysis of the acridane unit resulted in formation of the corresponding acridinium methoxide; this, in turn, could thermally react to return to the acridane moiety. Due to the creation of a positive charge, the ring moved from the acridane station to a second, evasive station within the axle. This switching cycle could also take place when deposited on the gold surface. However, on the gold surface, the ring movement associated with the switching process was unidirectional.     

Charge calculations in molecular mechanics. IX. A general parameterisation of the scheme for saturated halogen,oxygen and nitrogen compounds

Summary The CHARGE2 program for the calculation of partial atomic charges has been amended to include bond parameters for a number of organic functional groups, including halogens, nitrogen and oxygen. These minor amendments to the original scheme produce dipole moments for the fluoro and chloro compounds which are in complete agreement with the observed values.The less complete data sets for the bromo and iodo compounds are also well reproduced, and the dipole moments of a variety of mixed halo compounds are now in better agreement with experiment than previously.The calculated dipole moments of the saturated nitrogen and oxygen compounds are now in much better agreement than in the original scheme, thus the revised parameterisation may be employed with confidence to predict the electrostatic energies of these compounds.Furthermore, the revised scheme now gives a precise proportionality between the charge on the proton in a CH group and the ¹H chemical shift of the corresponding proton, allowing the general prediction, in principle, of ¹H chemical shifts. In addition, attempts to include variable electronegativity in the effect are described for fluoro compounds.For part VIII see Ref. 1.     

Structural, Infrared, and Magnetic Characterization of the Solid Solution Series Sr2−xPbx(VO)(VO4)2; Evidence of the Pb6sLone Pair Stereochemical Effect

The solid solution Sr_2−xPb_xV₃O₉, 0≤x≤2, was prepared by solid state reactions and characterized by X-ray diffraction, IR spectroscopy, and magnetic susceptibility measurements. Single crystals of the pure strontium phase and mixed Sr/Pb compounds were prepared by high temperature treatment of the respective powder compositions. Pb₂V₃O₉crystals could only be obtained by the electrochemical reduction of molten PbV₂O₆. These crystals were always twinned. The previously reported crystal structure of Sr₂V₃O₉was confirmed. It was refined toR=0.050,R_w=0.057, in space group C2/c,a=7.555(1) Å,b=16.275(2) Å,c=6.948(1) Å,β=119.78(1)°. The single crystal structural studies of the Sr_1.02Pb_0.98V₃O₉and Sr_0.67Pb_1.33V₃O₉members of the series show that the introduction of lead gives rise to a progressively complicated splitting of Sr²⁺/Pb²⁺and the tetrahedral vanadium ion crystallographic sites. As a consequence the vanadium framework distorts and beyond the Sr_0.5Pb_1.5V₃O₉composition the crystal symmetry becomes triclinic. This distortion is ascribed to the stereochemical effect of the 6s²lone pair of Pb²⁺. The crystallographic parameters of Pb₂V₃O₉area=7.598(1) Å,b=16.393(3) Å,c=6.972(2) Å,α=91.38(1)°,β=119.35(1)°,γ=90.47(1)°. Pb₂V₃O₉exhibits a more complex IR spectrum than the monoclinic phases. Despite the similarity between the triclinic and monoclinic phases the magnetic susceptibilities indicate differences in the coupling between V⁴⁺ions at low temperatures.     

Crystallization of Celecoxib in Microemulsion Media

Celecoxib belongs to a new NSAID family specifically inhibiting cyclooxygenase‐2 (COX‐2). The present formulations require high dosage since the transmembrane transport fluctuates and is very difficult to control. We solubilized celecoxib in micelles of nonionic microemulsions and hydrophilic surfactant. The supersaturated solubilized drug was precipitated from the nano‐droplets to form a new solid structure with improved dissolution properties. The selected microemulsion systems loaded with celecoxib were characterized by SAXS, SD‐NMR, viscosity, and electrical conductivity techniques. Precipitation was conducted from W/O as well as from O/W U‐type microemulsions. The crystals obtained by the precipitation were characterized by x‐ray powder scattering, differential scanning calorimetry, FTIR measurements, and microscopic scans.     

Structure of mercaptobiphenyl monolayers on mercury

The molecular-scale structure and phase behavior of single-component Langmuir films of 4'-methyl-4-mercaptobiphenyl (MMB) and 4'-perfluoromethyl-4-mercaptobiphenyl (FMMB) on mercury were studied using surface tensiometry, grazing incidence X-ray diffraction, and X-ray reflectivity. At low coverages, a condensed but in-plane disordered single layer of surface-parallel molecules is found for both compounds. At high coverages, both compounds exhibit in-plane-ordered phases of standing-up molecules. For MMB, the biphenyl core dominates the structure, yielding a centered-rectangular unit cell with an area A(x) of 21.8 A(2)/molecule, with molecules tilted by approximately 14 degrees from the surface normal in the nearest-neighbor direction, and a coherence length xi of >1000 A for the crystalline domains. For FMMB, the perfluoromethyl group dominates the structure, yielding a hexagonal unit cell with untilted molecules, an area A(x) of 24.2 A(2)/molecule, and a much smaller xi of approximately 110 A. The structure is discussed in comparison with self-assembled monolayers of MMB on crystalline Au(111) and similar-length alkanethiolate SAMs on Au(111) and on mercury. The differences in the structure are discussed and traced to the differences in the substrate's surface structure, and in the molecular cross section and rigidity.     

Characterization of amyloidogenic immunoglobulin light chains directly from serum by on-line immunoaffinity isolation

Primary systemic amyloidosis (AL) is characterized by the overproduction of immunoglobulin light chain proteins by a monoclonal, terminally differentiated B-lymphocyte or plasma cell clone. The free immunoglobulin light chains are deposited in an abnormal conformation as amyloid in a variety of organs in the body. The mechanism of amyloid formation is not well understood, but appears to be associated with some form of cleavage of the immunoglobulin light chain with subsequent aggregate formation. In an attempt to characterize the structure of amyloid-forming light chain proteins we developed an on-line immunoaffinity purification and subsequent characterization of free kappa and free lambda immunoglobulin light chains by electrospray ionization mass spectrometry. The methodology is totally automated and requires 20 micro L of serum. Mass spectral analysis of Bence Jones proteins under non-denaturing conditions was also utilized to examine the tertiary and quaternary structure of light chain proteins and clearly shows covalent dimer formation of lambda type light chain. This type of on-line assay may prove helpful in elucidating distinguishing features capable of discriminating AL from benign monoclonal gammopathies of undetermined significance as well as diagnosing AL.