Effects of low polymer content in a liquid-crystal microlens

A small number of bifunctional monomers are mixed with a nematic liquid crystal (LC) and cured with a distributed electric field, which is produced by a circular-hole-patterned electrode structure. A gradient type of lens, that is, a LC microlens, is investigated for various polymer concentrations. Addition of 3% polymer is enough to freeze the gradient-index properties of the structure in the form of a convex lens, and a polymer-stabilized LC microlens is demonstrated. Although a lower concentration of polymer cannot hold the distribution properties in a curing process, it can maintain the variable focus as a nematic material can. The polymer networks can also eliminate the disclination line that usually appears and causes the lens in this type of LC device to deteriorate.     

Current-induced spin-wave excitations in a single ferromagnetic layer

Evidence for a current-induced spin-transfer torque effect has been investigated in a series of point contacts to single ferromagnetic layers. At specific current densities, abrupt resistance changes, similar to those attributed to current-induced spin-wave excitations in multilayers, have been observed for one current polarity. The critical current for these resistance changes depends linearly on the external field applied perpendicular to the layer. The observed effect is interpreted as a current-driven heterogeneous instability in an otherwise uniform ferromagnetic layer.     

Inclusion of SWCNTs in Nb/Pt co-doped TiO2 thin-film sensor for ethanol vapor detection

Nb-Pt co-doped TiO₂ and the hybrid SWCNTs/Nb-Pt co-doped TiO₂ thin films have been prepared by the sol–gel spin-coating process for gas-sensor fabrication. Field emission scanning electron microscope (FE-SEM, TEM and X-ray diffraction (XRD) characterizations indicated that the SWCNTs inclusion did not affect the morphology of the TiO₂ thin film and the particle size. Additionally, the SWCNTs were well embedded in the TiO₂ matrix. The gas-sensing properties of Nb–Pt co-doped TiO₂ thin films with and without SWCNTs inclusion were investigated. The hybrid sensors with the inclusion of different SWCNTs contents are examined to elucidate the effect of SWCNTs content on the gas-sensing properties. Experimental results revealed that the responses to ethanol of Nb–Pt co-doped TiO₂ sensors with SWNCTs inclusion increase by factors of 2–5 depending on the operating temperature and the ethanol concentration, compared to that of the sensor without SWCNTs inclusion. Moreover, all hybrid sensors can operate with high sensitivity and stability at a relatively low operating temperature (<335 °C). The responses of the hybrid sensors are greatly affected by SWCNTs content inclusion. The optimized SWCNTs content of 0.01% by weight was obtained for our experiment. The improved gas-sensing performance should be attributed to the additional formation of the p/n junction between SWCNTs (p-type) and TiO₂ (n-type).     

Syndioselective propylene polymerizations by ansa-zirconocenium catalyst

The effect of reaction conditions, including catalyst concentration, temperature, and immobilization on support, have been investigated for syndioselective propylene polymerization by the “bare” zirconocenium ion generated from 1,1-diphenyl-methylidene(1-η⁵-cyclopentadienyl)(9-η⁵-fluorenyl)zirconium-dichloride precursor (2). Neither variation of the catalyst concentration nor immobilization of 2 on silica support affect the syndiospecificity of polymerization. The stereoregularity of the syndiotactic polypropylene, as judged from the melting transition temperature and homosteric r-pentad population by ¹³C-NMR, were found to be proportional to polymer molecular weight. These behaviors are compared with a typical isoselective catalyst ethylenebis(4,5,6,7-tetrahydroindenyl) Zr precursor (4). They are in close resemblance in the case of the S-enantiomeric complex of 4, but the racemic mixture of 4 is markedly inferior. The origins of stereo- and regio-errors are discussed. © 1996 John Wiley & Sons, Inc.     

Numerical study of InGaN tandem solar cells with intermediate bands

Theoretical investigations of InGaN tandem solar cells with intermediate bands (IBs) have been conducted through calculating the diode equation taking into account the radiative and nonradiative recombination currents. The calculated maximum ef?ciencies of the double‐junction cell with one IB in each subcell are 57.85% and 68.37% under AM1.5G one‐sun and 46000‐sun illuminations, respectively. It has also been observed that the combined device with the top‐cell bandgaps of 2.9–3.4 eV (2.6–3.4 eV for full concentration) may have an opportunity to realize the application of over 50% efficiency. We suggest that the optimized width of the IB layer be designed in the range of 1–6 μm if its absorption coefficient is 10⁴–10⁵ cm^–1 in the IB region.     

The boundary of higher rank numerical ranges

The rank-k-numerical range of an n×n matrix A is defined as

     

Structural characterization,thermal stability,and solvent de-/ad-sorption behavior of two d10 M(II) (M = Cd and Zn) coordination polymers constructed by 1,3,5-tris(4-pyridylsulfanyl-methyl)-2,4,6-trimethyl-benzene (L1)

Two d¹⁰ M(II) (M = Cd and Zn) coordination polymers (CPs) with chemical formulas, {[Cd(L¹)(NCS)₂(H₂O)]⋅C₂H₅OH}_n (1) , and {[Zn(L¹)(NCS)₂]⋅C₂H₅OH⋅0.5H₂O}_n (2) (L¹ = 1,3,5-tris(4-pyridylsulfanylmethyl)-2,4,6-trimethylbenzene) were synthesized and structurally characterized by single-crystal x-ray diffraction method. In compound 1 , the coordination environment of Cd(II) ion is distorted octahedral bonded to three nitrogen donors from three L¹ ligands located in a facial-position, two nitrogen donors from NCS⁻ and one water molecule. The L¹ acts as a bridge ligand with tris-monodentate coordination mode in a cis-cis-cis structural conformation, connecting the Cd(II) to form a two-dimensional (2D) zigzag-like layered metal-organic frameworks. Adjacent 2D layers are then arranged orderly in an ABAB manner to complete its three-dimensional (3D) supramolecular architecture. In compound 2 , the coordination environment of Zn(II) ion is distorted tetrahedral bonded to two nitrogen donors from two L¹ ligands and two nitrogen donors from two NCS⁻ ligands. The L¹ acts as a bridge ligand with bis-monodentate coordination mode in a cis-cis-cis structural conformation, connecting the Zn(II) ions to form a one-dimensional (1D) zigzag-like polymeric chain. Adjacent chains are arranged orderly in an alternate ABAB manner to generate a 2D framework and then further arranged in an AAA manner to complete its 3D supramolecular architecture. The structural characterization as well as thermal-stability and solvents de-/ad-sorption behavior of 1 and 2 are studied and discussed in details.     

Reversible Sodium Metal Electrodes: Is Fluorine an Essential Interphasial Component?

Alkaline metals are an ideal negative electrode for rechargeable batteries. Forming a fluorine‐rich interphase by a fluorinated electrolyte is recognized as key to utilizing lithium metal electrodes, and the same strategy is being applied to sodium metal electrodes. However, their reversible plating/stripping reactions have yet to be achieved. Herein, we report a contrary concept of fluorine‐free electrolytes for sodium metal batteries. A sodium tetraphenylborate/monoglyme electrolyte enables reversible sodium plating/stripping at an average Coulombic efficiency of 99.85 % over 300 cycles. Importantly, the interphase is composed mainly of carbon, oxygen, and sodium elements with a negligible presence of fluorine, but it has both high stability and extremely low resistance. This work suggests a new direction for stabilizing sodium metal electrodes via fluorine‐free interphases.     

Visible‐Light‐Induced [4+2] Annulation of Thiophenes and Alkynes to Construct Benzene Rings

The [4+2] annulation represents an elegant and versatile synthetic protocol for the construction of benzene rings. Herein, a strategy for visible‐light induced [4+2] annulation of thiophenes and alkynes, to afford benzene rings, is presented. Under simple and mild reaction conditions, the ready availability and structural diversity of thiophenes and alkynes permit the facile synthesis of several substituted aromatic rings. Valuable drugs and amino acids are also well tolerated. Moreover, DFT calculations explain the high regioselectivity of the reaction.