Peroxotungstate immobilized on ionic liquid-modified silica as a heterogeneous epoxidation catalyst with hydrogen peroxide

Peroxotungstate immobilized on ionic liquid-modified SiO2 is capable of heterogeneously epoxidizing a wide range of olefins with the maintenance of the catalytic activity of homogeneous analogue. The epoxidation was immediately stopped by the removal of the catalyst, and no tungsten species could be found in the filtrate after the removal of the catalyst. These results can rule out any contribution to the observed catalysis from the tungsten species that leached into the reaction solution, and the observed catalysis is truly heterogeneous in nature. Furthermore, the catalyst was reusable without the loss of the catalytic performance.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

Practical synthesis of a neuropeptide Y antagonist via stereoselective addition to a ketene

[Reaction: see text]. The synthesis of neuropeptide Y antagonist 1, currently under clinical investigation for the treatment of obesity, is described. The convergent synthesis from trans-spirolactone carboxylic acid intermediate 2a and aminopyrazole 3 is predicated on a stereoselective route to the former. The coupling reaction of ethyl 4-oxocyclohexanecarboxylate (10a) with lithiated isonicotinamide 11 was investigated in detail, but even optimized conditions only provided a 45:55 ratio of trans:cis isomers (12a:12b). While selective crystallization schemes were developed to isolate the thermodynamically less stable trans isomer 2a, improved stereocontrol was subsequentially achieved by the application of ketene chemistry. The ketene formation and quench was investigated under a variety of conditions aimed at maximizing the trans:cis ratio. Reacting a mixture of carboxylic acids 2a and 2b with POCl3 in THF, followed by concomitant addition of tert-butyl alcohol in the presence of TMEDA at 35 degrees C provided a 4:1 ratio of trans:cis tert-butyl esters (18a:18b) via in situ ketene formation. Ester hydrolysis, followed by selective crystallization of undesired 2b as the HCl salt, led to isolation of 2a in 47% overall yield. Aminopyrazole intermediate 3 was synthesized via the condensation reaction of 2-fluorophenylhydrazine hydrochloride (4a) with acrylonitrile derivative 5 in 65-70% yield. Coupling of advanced intermediates 2a and 3b via activation with thionyl chloride gave a 92% yield of 1.     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Visible light-responsive cell scaffolds with bilayer structures for single cell separation

Collagen is a major component of the extracellular matrix, and collagen gels have been used as cell scaffolds. We previously prepared gold nanoparticle (AuNP)-embedded collagen gels (AuCol) to serve as cell scaffolds that were sensitive to visible light. We performed single cell detachment from this cell scaffold using a microscope equipped with a laser irradiation system. In the present study, we adjusted hydrogel thickness and AuNP concentration in AuCol, with a goal of improving cell detachment efficiency. Thin hydrogels became blackened after the laser irradiation, and thick hydrogels with high AuNP concentrations were not permeable to the laser light. We, therefore, prepared bilayer gels, composed of AuCol as the upper layer and intact collagen gel (Col) as the bottom layer. These bilayer gels allowed more effective cell detachment, because they were thick and optically transparent. Our results indicated that an AuCol/Col ratio of 2 enabled the highest cell detachment efficiency. Essentially, no cell damage was observed in our system, suggesting that this is a cell-friendly single cell separation system.     

Development of a New Benzylating Reagent Spontaneously Releasing Benzyl Cation Equivalents at Room Temperature

A new O‐benzylating reagent, that is, 4‐(4,6‐diphenoxy‐1,3,5‐triazin‐2‐yl)‐4‐benzylmorpholinium trifluoromethanesulfonate (DPT‐BM), has been developed. Benzyl cation equivalents are generated from DPT‐BM by dissolving the compound in a solvent at room temperature under non‐acidic conditions. The benzylation of various alcohols by using a combination of DPT‐BM and magnesium oxide provided the benzyl ethers in good yields.     

Preparation and properties of a fullerene/polysiloxane hybrid from chemically modified fullerene and polymethoxysiloxane

An organic–inorganic hybrid was prepared by simply mixing a fullerene derivative with polymethoxysiloxane. First, C₆₀ was subjected to a radical addition reaction with 4,4′-azobis(4-cyanovaleric acid) to provide a C₆₀ derivative. Polymethoxysiloxane was prepared by a controlled hydrolytic condensation of tetramethoxysilane. These two compounds were mixed and heated to provide hybrid bulk body. The hybrid bulk body showed high mechanical strength and elastic modulus compared with polymethoxysiloxane or the C₆₀/polymethoxysiloxane hybrid. The formation of a dense siloxane network was established by a homogeneous mixing of the C₆₀ derivative with polymethoxysiloxane.     

Discotic Liquid Crystals of Transition Metal Complexes, 19: Discotic Mesomorphism and Double Clearing Behavior of Octakis(dialkoxyphenyl)phthalocyanine Derivatives

Eight novel octakis(3,4-dialkoxyphenyl)- phthalocyanine derivatives, Cn-M (2, M=2H; 3, M=Ni; 4, M=Cu; a, decyloxy; b, undecyloxy; c, dodecyloxy), have been synthesized and characterized. It was found that each of the derivatives exhibits discotic liquid crystalline properties, and that each of the Cn–Cu (4) derivatives has two kinds of D_rd2( P 2₁/ a ) mesophases. These Cn–Cu (4a,b,c) and C₁₂–2H (2c) derivatives exhibit a unique double clearing behavior.