A novel reagent for spectroscopic determination of Mo(VI)

A new reagent for spectrophotometric determination of Mo(VI) was developed utilizing micellar effects. For this purpose, differences in the ultraviolet and visible spectral properties of Mo(VI), gallic acid, L-serine, and their binary and ternary solutions were studied in the presence and absence of cationic, anionic, and non-ionic surface active agents. L-serine was observed to form binary complexes and a ternary complex with Mo(VI) and gallic acid below its isoelectric point. The maximum Mo(VI) sensitivity was exerted by the Mo(VI) + gallic acid + L-serine + hexadecyltrimethylammonium bromide system at pH of 4.5. This system was proposed for use in the spectrophotometric determination of Mo(VI) as a superior alternative to the Mo(VI) + gallic acid + hexadecyltrimethylammonium bromide system and to most of the instrumental analysis methods referred to in the literature. The mechanism of micellar effects was discussed on the basis of the spectral data obtained above and below the isoelectric point of L-serine and explained in terms of the molecular charge of the substrates and the surfactants.     

Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

Microbial Screening of Copolymers of N‐Vinylimidazole with Phenacyl Methacrylate: Synthesis and Monomer Reactivity Ratios

N‐vinylimidazole (VIM), and phenacyl methacrylate (PAMA) copolymerized with different feed ratios using 1,4‐dioxane as a solvent and α,α'‐azobisisobutyronitrile (AIBN) as an initiator at 60°C. Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis (content of N for VIM‐units) and by Fourier transform infrared spectroscopy through recorded analytical absorption bands for VIM (670 cm^?1 for C‐N of imidazole ring) and PAMA (1730 cm^?1 for C?O of ester group) units, respectively. Monomer reactivity ratios for VIM (M₁)‐PAMA (M₂) pair were determined by the application of conventional linearization methods such as Fineman‐Ross (F‐R) and Kelen‐Tüdös (KT) and a nonlinear error invariable model method using a computer program RREVM. The molecular weights (_w and _n) and polydispersity indices of the polymers were determined using gel permeation chromatography (GPC). Thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Also, the apparent thermal decomposition activation energies (ΔE_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance. The antibacterial and antifungal effects of polymers were also tested on various bacteria, fungi and yeast.     

Antioxidant secondary metabolites from Geranium lasiopus Boiss. & Heldr

Chromatographic studies on the EtOAc soluble portion of the MeOH extract of Geranium lasiopus led to the isolation of eight flavonoids (kaempferol (1), quercetin (2), quercetin 3-O-β-glucopyranoside (3), quercetin 3-O-β-galactopyranoside (4), kaempferol 3-O-α-rhamnopyranosyl-(1?→?6)-β-glucopyranoside (5), quercetin 3-O-α-rhamnopyranosyl-(1?→?6)-β-glucopyranoside (6), kaempferol 3-O-α-rhamnopyranosyl-(1?→?2)-β-glucopyranoside (7) and quercetin 3-O-α-rhamnopyranosyl-(1?→?2)-β-glucopyranoside (8)), two simple phenolic compounds (gallic acid (9) and its methyl ester (10)) and a hydrolysable tannin (pusilagin (11)). The structures of the compounds were elucidated by 1- and 2-dimensional NMR techniques ((1)H, (13)C, COSY, HMBC, HMQC) and ESI-TOF-MS spectrometry. Inhibitory effects on H(2)O(2)-induced lipid peroxidation in human red blood cells of the different extracts of G. lasiopus, as well as isolated compounds, were investigated. All tested compounds showed comparable or higher activity than that of ascorbic acid and trolox.     

Phthalocyanine with a giant dielectric constant

Compound 1 has been prepared by the reaction of 4-nitrophthalonitrile and trans-2-methoxy-4-(2-nitrovinil)phenol by the common method of nucleophilic substitution of an activated nitro group in an aromatic ring. The metallophthalocyanines 2, 3 were prepared by the reaction of a dinitrile derivative with Co(OAc)(2) or Zn(OAc)(2) in DMSO. The lutetium bis-(phthalocyaninato) complex 4 was obtained by treating the dinitrile derivative with lutetium acetate and DBU in 1-hexanol. The new compounds were characterized by elemental analyses, FT-IR, (1)H-NMR, MALDI-TOF MS and UV/Vis spectral data. The spectroscopic data of the new compounds were in accordance with the structures. The temperature and frequency dependence of dielectric and conduction properties of the spin coated film of compounds (2-4) have been studied by fabricating metal-Pc-metal structures. The results show that compound 2 has giant dielectric constant. At a low range of frequency and room temperature, ε' is found to be equal to 2.33 × 10(6), 1.53 × 10(4) and 1.03 × 10(4) for 2, 3 and 4, respectively. The giant dielectric behavior of 2 is mainly attributed to Maxwell-Wagner polarization. The obtained results also indicated that the frequency dependence of the dielectric permittivity, ε'(ω), exhibits non-Debye type relaxation for all temperatures investigated. The ac conductivity results gave a temperature dependent frequency exponent s. The results were compared with the prediction of the Quantum Mechanical Tunneling and Correlated Barrier Hopping models.     

Investigations and application in piezoelectric phenol sensor of Langmuir-Schäfer films of a copper phthalocyanine derivative functionalized with bulky substituents

An octa-substituted copper phthalocyanine was dissolved in chloroform and spread on ultrapure water subphase in a Langmuir trough. The floating films were characterized at the air–water interface by the Langmuir isotherm, Brewster angle microscopy, and UV–Vis reflection spectroscopy and transferred by Langmuir–Schäfer technique on a silicon substrate, and thickness, refractive index, and extinction coefficient of the phthalocyanine derivative thin film were calculated by means of spectroscopic ellipsometry. A different number of layers were deposited using Langmuir–Schäfer method onto QCM crystals, and the active layers were tested as sensors for the detection of phenols in aqueous solution. The piezoelectric sensor response, totally reversible, is influenced by the number of transferred layers and by the nature of the substituent; on the contrary, the pK_a value of the injected analytes slightly affects the device performances. Repeatability of the sensor responses was tested, and the frequency variation appears unchanged at least for 100 days.     

Synthesis,characterization, and application of silver nanoparticle‐thiophenol nanocomposite film on the glassy carbon surface

In this study, 4‐thiophenol modified glassy carbon electrode was prepared by the reduction of 4‐diazothiophenol tetrafluoroborate salt. Silver nanoparticles were attached to the thiophenol modified surface to prepare a thiophenol‐silver nanoparticle composite film. 4‐Aminothiopenol molecules were deposited by self‐assembling technique to form multi‐layered nanofilms of TP/SNP/PhNH₂ on glassy carbon substrate. These surfaces were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, X‐ray photoelectron spectroscopy, reflectance‐absorption infrared spectroscopy, and ellipsometry at each multilayer film growth process. Atomic force microscopic images of GC/TP/SNP/PhNH₂ surfaces were also acquired. The characterization methods show that the amine group containing surface permits the subsequent modification by a variety of coupling reactions for the immobilization of more complex systems. An application of the electrode modification for the determination of uric acid with a significantly lower detection limit is described. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of N,N‐Dimethylamines via Barbier–Grignard‐Type Electrophilic Amination

Aryl Grignard reagents react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine in THF under Barbier conditions at room temperature and give N,N‐dimethylanilines with high yields in a 2‐h reaction. The amination yield of in situ Grignard reagents were not lower than those of preformed aryl Grignard reagents. In situ cycloalkyl‐, allyl‐, and benzylmagnesium bromides did not react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine, except that amination of in situ n‐hexylmagnesium bromide resulted in a medium yield. Grignard–Barbier‐type amination of aryl bromides with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine provides a new alternative route for the synthesis of N,N‐dimethylanilines.     

Beckmann Fragmentation of Diphenylcarbamoylated N-Aryldiphenacylamine Dioximes. New Method for the Synthesis of Imidazooxadiazolones

N-Aryl-N,N-diphenacylamine dioximes were prepared by the reaction of corresponding arylamines with α-bromoacetophenone oxime in ethanol-water at room temperature. These compounds reacted with aryl isocyanates in acetonitrile to give imidazooxadiazolones 9. The probable mechanism of the reaction is discussed.     

Optimization of Microwave-Assisted Extraction (MAE) for the Isolation of Antioxidants from Basil (Ocimum basilicum L.) by Response Surface Methodology (RSM)

Abstract

The recovery of antioxidants from basil (Ocimum basilicum L.) was modeled with the aid of response surface methodology (RSM) using microwave-assisted extraction (MAE). Face-centered central design (FCCD) was employed to optimize the MAE operational parameters including the extraction time (1 to 7?min), extraction temperature (30 to 120?°C), solid-to-solvent ratio (0.1 to 0.4), and solvent concentration (20 to 80% ethanol, v/v), and to obtain the best possible combinations of these parameters for a high antioxidant yield from basil. The total antioxidant capacity (TAC) was expressed in trolox (TR) equivalents per gram of dried sample (DS). Three of the operational parameters (temperature, extraction time and solvent concentration) were shown to have significant effect on the extraction efficiency of antioxidants in basil extracts (p?<?0.05). The solvent concentration was shown to be the most significant factor on antioxidant yield obtained by MAE. There was a close relationship between experimental and predicted values using the proposed method. This optimized MAE method shows an application potential for the efficient extraction of antioxidants from basil in the food and pharmaceutical industries.