Thermal properties and kinetics of new-generation posterior bulk fill composite cured light-emitting diodes

In this study, the thermal behavior in terms of glass transition (T _g), degradation, and thermal stability of four commercial new-generation posterior bulk fill composites (Surefill SDR, Dentsply; Quixfill, Dentsply; Xtrabase, Voco; and Xtrafill, Voco) activated by light-emitting diodes (LEDs) was analyzed by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The activation energies (E _a) for the decomposition of the dental resins were calculated based on the Kissinger and Doyle kinetic models from the peaks of the endothermic curves obtained when the specimens were heated at four different temperatures (5, 10, 15, and 20 °C min^?1) during DSC. The results show that the Xtrabase composite displayed the highest T _g (120 °C at a 5 °C min^?1 heating rate) and E _a (157.64 kJ mol^?1) values associated with thermal degradation from the main chain of the polymer.     

Preparation and characterization of activated carbon from pine cone by microwave-induced ZnCl2 activation and its effects on the adsorption of methylene blue

In this work, activated carbon prepared from pine cone (PCAC) with ZnCl₂ as an activation agent under microwave radiation was investigated. The activation step was performed at the microwave input power of 400 W and radiation time of 5 min. The properties of activated carbon were characterized by N₂ adsorption Brunauer–Emmett–Teller (BET), scanning electron microscopy and Fourier transform infrared spectroscopy. Results showed that the BET surface area, Langmuir surface area, and total pore volume of PCAC were 939, 1,486 m²/g and 0.172 cm³/g, respectively. Adsorption capacity was demonstrated by the iodine numbers. The adsorptive property of PCAC was tested using methylene blue dye. Equilibrium data was best fitted by the Langmuir isotherm model, showing a monolayer adsorption capacity of 60.97 mg/g. The pseudo-first- and pseudo-second-order kinetic models were examined to evaluate the kinetic data, and the rate constants were calculated. Adsorption of the dyes followed pseudo-first order kinetics. Thermodynamic parameters such as free energy, enthalpy and entropy of dye adsorption were obtained.     

Palladium(II)‐N‐heterocyclic carbene complexes: synthesis,characterization and catalytic application

N‐Heterocyclic carbenes (NHCs) are of great importance and are powerful ligands for transition metals. A new series of sterically hindered benzimidazole‐based NHC ligands (LHX) ( 2a , 2b , 2c , 2d , 2e , 2f ), silver–NHC complexes ( 3a , 3b , 3c , 3d , 3e , 3f ) and palladium–NHC complexes ( 4a , 4b , 4c , 4d , 4e , 4f ) have been synthesized and characterized using appropriate spectroscopic techniques. Studies have focused on the development of a more efficient catalytic system for the Suzuki coupling reaction of aryl chlorides. Catalytic performance of Pd–NHC complexes and in situ prepared Pd(OAc)₂/LHX catalysts has been investigated for the Suzuki cross‐coupling reaction under mild reaction conditions in aqueous N,N‐dimethylformamide (DMF). These complexes smoothly catalyzed the Suzuki–Miyaura reactions of electron‐rich and electron‐poor aryl chlorides. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermal conductivity and interfacial energy of solid Bi in the Bi–Ag eutectic system

Journal of Thermal Analysis and Calorimetry - The equilibrated grain boundary groove shapes for solid Bi (Bi–2.87 at.%Ag) in equilibrium with Bi–Ag eutectic liquid have been...     

Thermal stability of the manganese-nickel mixed ferrite and iron phases in the Mn0.5Ni0.5Fe2O4/Fe composite/nanocomposite powder

The composite/nanocomposite powders of Mn_0.5Ni_0.5Fe₂O₄/Fe type were synthesized starting from nanocrystalline Mn_0.5Ni_0.5Fe₂O₄ (D = 7 nm) (obtained by ceramic method and mechanical milling) and commercial Fe powders. The composites, Mn_0.5Ni_0.5Fe₂O₄/Fe, were milled for up to 120 min and subjected to heat treatment at 600 °C and 800 °C for 2 h. The manganese-nickel ferrite/iron composite samples were subjected to differential scanning calorimetry (DSC) up to 900 °C for thermal stability investigations. The composite component phases evolution during mechanical milling and heat treatments were investigated by X-ray diffraction technique. The present phases in Mn_0.5Ni_0.5Fe₂O₄/Fe composite are stable up to 400–450 °C. In the temperature range of 450-600 °C, the interdiffusion phenomena occurs leading to the formation of Fe_1?xMn_xFe₂O₄/Ni–Fe composite type. The new formed ferrite of Fe_1?xMn_xFe₂O₄ type presents an increased lattice parameter as a result of the substitution of nickel cations into the spinel structure by iron ones. Further increases of the temperature lead to the ferrite phase partial reduction and the formation of wustite-FeO type phase. The spinel structure presents incipient recrystallization phenomena after both heat treatments (600 °C and 800 °C). The mean crystallites size of the ferrite after heat treatment at 800 °C is about 75 nm. After DSC treatment at 900 °C, the composite material consists in Fe_1?xMn_xFe₂O₄, Ni structure, FeO, and (NiO)_0.25(MnO)_0.75 phases.     

Ultrasound-assisted ozone bleaching of cotton

In this study, the effects of ultrasound on ozone treatment processes for bleaching cotton fabrics were investigated and compared with the conventional hydrogen peroxide bleaching process (60 °C over 90 min). Two ultrasonic + ozone treatments of cotton fabric samples were carried out: (1) ozone in an ultrasonic homogenizer (UH) and (2) ozone in an ultrasonic bath. Ozone dosages, temperature and time variations were determined with both ozone-ultrasonic bleaching processes. Whiteness, yellowness, weight, tensile strength properties, FTIR (ATR) spectra and visual appearance, via scanning electron microscopy of treated cotton fabrics as well as chemical oxygen demand (COD) of bleaching effluents, were investigated. It was concluded that the ozone + UH process, conducted for 30 min at 30 °C, produced closely equivalent values of cotton fabric whiteness and yellowness to the classic peroxide bleaching process, with slightly less weight loss, dramatically less COD in the process effluent (29 mg/l for ozone-UH vs. 4,316 mg/l for classical peroxide treatment), and without causing any adverse and/or detrimental effects on loss of fabric strength or elongation of the cotton fabrics. The ozone-UH process also leads to time and energy savings with much less environmental impact. Consequently, the combination of ozonation plus UH carried out at 30 °C over 30 min can be used successfully for cotton bleaching instead of the classic hydrogen peroxide bleaching process.     

Functional copolymer/organo‐MMT nanoarchitectures. XIX. Nanofabrication and characterization of poly(MA‐alt‐1‐octadecene)‐g‐PLA layered silicate nanocomposites with nanoporous core–shell morphology

Novel bioengineering functional copolymer‐g‐biopolymer‐based layered silicate nanocomposites were fabricated by catalytic interlamellar bulk graft copolymerization of L‐lactic acid (LA) monomer onto alternating copolymer of maleic anhydride (MA) with 1‐octadecene as a reactive matrix polymer in the presence of preintercalated LA…organo‐MMT clay (reactive ODA‐MMT and non‐reactive DMDA‐MMT) complexes as nanofillers and tin(oct)₂ as a catalyst under vacuum at 80°C. To characterize the functional copolymer layered silicate nanocomposites and understand the mechanism of in situ processing, interfacial interactions and nanostructure formation in these nanosystems, we have utilized a combination of variuous methods such as FT‐IR spectroscopy, X‐ray diffraction (XRD), dynamic mechanical (DMA), thermal (DSC and TGA‐DTG), SEM and TEM morphology. It was found that in situ graft copolymerization occurred through the following steps: (i) esterification of anhydride units of copolymer with LA; (ii) intercalation of LA between silicate galleries; (iii) intercalation of matrix copolymer into silicate layers through in situ amidization of anhydride units with octadecyl amine intercalant; and (iv) interlamellar graft copolymerization via in situ intercalating/exfoliating processing. The main properties and observed micro‐ and nanoporous surface and internal core–shell morphology of the nanocomposites significantly depend on the origin of MMT clays and type of in situ processing (ion exchanging, amidization reaction, strong H‐bonding and self‐organized hydrophobic/hydrophilic interfacial interactions). This developed approach can be applied to a wide range of anhydride‐containing copolymers such as random, alternating and graft copolymers of MA to synthesize new generation of polymer‐g‐biopolymer silicate layered nanocomposites and nanofibers for nanoengineering and nanomedicine applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Nitro Derivatives of Parabanic Acid as Potential Explosives: A Theoretical Study

This work deals with certain parabanic acid (PA) derivatives because they possess great calculated density (>1.8 g · cm^–3) and high content of nitrogen (26 %). Computed ballistic properties of eight different parabanic acid derivatives are presented. The structures were optimized at the B3LYP/6‐31G(d, p) level. The calculated data for PA are found to be compatible with the experimental X‐ray data. The detonation performance analyses were done using empirical Kamlet‐Jacobs equations. Additionally, detonation products were assigned and power index were calculated. All the compounds considered are powerful candidates for high energy materials.     

Metallo Phthalocyanines bearing 2‐Isopropyl‐6‐methylpyrimidin‐4‐yloxy Substituents: Synthesis,Characterization, Aggregation Behavior,Antioxidant and Antibacterial Activity,and Electronic Properties

A novel phthalonitrile derivative bearing 2‐isopropyl‐6‐methylpyrimidin‐4‐yloxy substituents at peripheral positions was synthesized by a nucleophilic substitution reaction. Metallophthalocyanines were obtained from the reaction of the novel phthalonitrile with metal Zn, Cu, Co, and Ni salts. The characterization of the compounds was performed using elemental analysis as well as UV/Vis, FT‐IR, and ¹H‐NMR spectroscopy. The aggregation behaviors of phthalocyanine complexes were also investigated. These metallophthalocyanines do not show any aggregation behavior between 10^–4–10^–6 M concentration range in THF. The antioxidant activities of the synthesized compounds were evaluated using three different tests: 2, 2‐diphenyl‐1‐picrylhydrazyl (DPPH) radical scavenging, metal chelating activity, and reducing power assays. All the compounds exhibited various antioxidant activities. In addition, antimicrobial activity of the compounds was tested over four gram positive and two gram negative bacteria. Moreover, the ground‐state geometries of the complexes were optimized using density functional theory (DFT) methods at B3LYP/6‐31G(d, p) level in order to obtain information about the 3D arrangements and electronic structure.     

Carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC) based hydrogels: synthesis and characterization

A novel carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC)-based hydrogel with sensitivity to environmental changes, pH and salts was synthesized by using fumaric acid and malic acid at various concentrations. Water uptake capacity of hydrogels was investigated in distilled water, various salt and pH solutions. From pH-dependent studies, it was found that greater water uptake values were observed at greater pH values (7.4), and reversible pH responsiveness of CMC–HEC based hydrogels was obtained. Decreasing the water uptake capacity with increasing of the charge of the metal cation (Al³⁺ < Ca²⁺ < Na⁺) demonstrated metal ion responsiveness of CMC–HEC-based hydrogels. From tensile tests of the hydrogels, a greater crosslinker concentration led to greater tensile strength values. Thermogravimetric analysis and scanning electron microscopy images were used to determine the thermal stability and to observe morphological properties of the samples, respectively.