Production and isolation of 197m,gHg

Journal of Radioanalytical and Nuclear Chemistry - A new procedure has been developed for isolating no-carrier-added 197m,gHg from 20 to 25&;nbsp;MeV α-particle irradiations of high purity...     

Incorporating beta-turns and a turn mimetic out of context in loop 1 of the WW domain affords cooperatively folded beta-sheets.

To probe the conformational requirements of loop 1 in the Pin1 WW domain, the residues at the i + 2 and i + 3 positions of a beta-turn within this loop were replaced by dPro-Gly and Asn-Gly, which are known to prefer the conformations required at the i + 1 and i + 2 positions of type II' and type I' beta-turns. Conformational specificity or lack thereof was further examined by incorporating into the i + 2 and i + 3 positions a non-alpha-amino acid-based beta-turn mimetic (4-(2'-aminoethyl)-6-dibenzofuran propionic acid residue, 1), which was designed to replace the i + 1 and i + 2 positions of beta-turns. All these Pin WW variants are monomeric and folded as discerned by analytical ultracentrifugation, NMR, and CD. They exhibit cooperative two-state transitions and display thermodynamic stability within 0.5 kcal/mol of the wild-type WW domain, demonstrating that the acquisition of native structure and stability does not require a specific sequence and, by extension, conformation within loop 1. However, it could be that these loop 1 mutations alter the kinetics of antiparallel beta-sheet folding, which will be addressed by subsequent kinetic studies.     

Deuterium/hydrogen isotope ratio measurement of water and organic samples by continuous-flow isotope ratio mass spectrometry using chromium as the reducing agent in an elemental analyser

A rapid continuous-flow technique for quantitative determination of hydrogen isotope ratios in water and organic materials at natural abundance levels is described. Water and organic samples were reduced in a helium stream at temperatures in excess of 1000 degrees C over chromium metal. delta(2)H per thousand values of water and organic samples were determined by calibration against International Atomic Energy Agency reference materials V-SMOW and SLAP water. The accuracy of the method was demonstrated through the analysis of the intermediate water standard GISP and IAEA water intercomparison materials OH-1, OH-2 and OH-3. Values obtained using this technique compared well with reference values (maximum difference 2.2 per thousand). The precision of water analyses was less than 2.3 per thousand (1 sigma or 1 standard deviation) in all cases. No apparent memory effect was observed when measuring samples at the natural abundance level. The application of the technique to organic molecules and the salts of organic acids was successfully demonstrated by measuring the delta(2)H per thousand values of an n-hexadecane laboratory reference and anhydrous calcium formate versus water calibration materials. Copyright Crown copyright 2001. Reproduced with permission of the Controller of Her Majesty's Stationery Office. Published by John Wiley & Sons, Ltd.     

Spectroscopic studies of substrate interactions with clavaminate synthase 2, a multifunctional alpha-KG-dependent non-heme iron enzyme: correlation with mechanisms and reactivities

Using a single ferrous active site, clavaminate synthase 2 (CS2) activates O(2) and catalyzes the hydroxylation of deoxyguanidinoproclavaminic acid (DGPC), the oxidative ring closure of proclavaminic acid (PC), and the desaturation of dihydroclavaminic acid (and a substrate analogue, deoxyproclavaminic acid (DPC)), each coupled to the oxidative decarboxylation of cosubstrate, alpha-ketoglutarate (alpha-KG). CS2 can also catalyze an uncoupled decarboxylation of alpha-KG both in the absence and in the presence of substrate, which results in enzyme deactivation. Resting CS2/Fe(II) has a six-coordinate Fe(II) site, and alpha-KG binds to the iron in a bidentate mode. The active site becomes five-coordinate only when both substrate and alpha-KG are bound, the latter still in a bidentate mode. Absorption, CD, MCD, and VTVH MCD studies of the interaction of CS2 with DGPC, PC, and DPC provide significant molecular level insight into the structure/function correlations of this multifunctional enzyme. There are varying amounts of six-coordinate ferrous species in the substrate complexes, which correlate to the uncoupled reaction. Five-coordinate ferrous species with similar geometric and electronic structures are present for all three substrate/alpha-KG complexes. Coordinative unsaturation of the Fe(II) in the presence of both cosubstrate and substrate appears to be critical for the coupling of the oxidative decarboxylation of alpha-KG to the different substrate oxidation reactions. In addition to the substrate orientation relative to the open coordination position on the iron site, it is hypothesized that the enzyme can affect the nature of the reactivity by further regulating the binding energy of the water to the ferrous species in the enzyme/succinate/product complex.     

The investigation of an equilibrium dependent reaction for the formation of enamines in a microchemical system

The paper describes the equilibrium dependant reaction for the formation of enamines in a microchemical system utilising electroosmotic flow (EOF) for fluid mobilisation. The authors have shown that the reaction can be carried out without the presence of a Lewis acid catalyst, in addition the enamine intermediate was synthesised at room temperature using mild solvent conditions. A 42% conversion of cyclohexanone into the enamine has been achieved to date.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Quantification and evaluation of Joule heating in on-chip capillary electrophoresis

We present the use of a novel, picoliter volume interferometer to measure, for the first time, the extent of Joule heating in chip-scale capillary electrophoresis (CE). The simple optical configuration for the on-chip interferometric backscatter detector (OCIBD) consists of an unfocused laser, an unaltered silica chip with a half-cylinder channel and a photodetector. Using OCIBD for millidegree-level noninvasive thermometry, temperature changes associated with Joule heating (2.81 degrees C above ambient) in on-chip CE have been observed in 90 microm wide and 40 microm deep separation channels. The temporal response of Joule heating in isotropically etched channels was exponential, with it taking an excess of 2.7 s to reach equilibrium. Buffer viscosity changes have also been derived from empirical on-chip thermometry data, allowing for the determination of diffusion coefficients for solutes when separated in heated buffers. In addition, OCIBD has allowed the reduction in separation efficiency to be estimated in the absence of laminar flow and due to increased molecular diffusion and lower buffer viscosity. A 7% reduction in separation efficiency was determined for a high current drawing buffer such as Tris-boric acid under an applied field of just 400 V/cm. Results indicate that heating effects in on-chip CE have been underestimated and there is a need to readdress the theoretical model.     

Chip-based nLC-TOF-MS is a highly stable technology for large-scale high-throughput analyses

Many studies focused on the discovery of novel biomarkers for the diagnosis and treatment of disease states are facilitated by mass spectrometry-based technology. HPLC coupled to mass spectrometry is widely used; miniaturization of this technique using nano-liquid chromatography (LC)-mass spectrometry (MS) usually results in better sensitivity, but is associated with limited repeatability. The recent introduction of chip-based technology has significantly improved the stability of nano-LC-MS, but no substantial studies to verify this have been performed. To evaluate the temporal repeatability of chip-based nano-LC-MS analyses, N-glycans released from a serum sample were repeatedly analyzed using nLC-PGC-chip-TOF-MS on three non-consecutive days. With an average inter-day coefficient of variation of 4 %, determined on log₁₀-transformed integrals, the repeatability of the system is very high. Overall, chip-based nano-LC-MS appears to be a highly stable technology, which is suitable for the profiling of large numbers of clinical samples for biomarker discovery.     

Synthesis of [ethylene-1-(eta(5)-4,5,6,7-tetrahydro-1-indenyl)-2- (eta(5)-4',5',6',7'-tetrahydro-2'-indenyl)]titanium dichloride, the elusive isomer of the Brintzinger-type ansa-titanocenes

We present a short synthesis of 1-(2-indenyl)-2-(3-indenyl)ethane (5) and a method for its conversion to the ansa-metallocene [ethylene(eta5-inden-1-yl)(eta5-inden-2-yl)]titanium dichloride (13). The synthetic strategy applied to prepare bisindene 5 relies on the efficient alkylation of 2-(phenylsulfonyl)indane followed by HMPA-assisted E1cB-elimination of phenylsulfinate. This tandem sequence circumvents the predisposition of indene to undergo C(1)-alkylation and enables access to C(2)-substituted indenes. The key step in the synthesis of the title ansa-titanocene (4) features a previously unreported equilibration step to generate the bis(indenide anion) of 5. Complexation with TiCl4.(THF)2 followed by hydrogenation of the product metallocene furnishes ansa-titanocene 4.