2-(2-Hydroxyaryl)cinnamic amides: a new class of axially chiral molecules

The syntheses of several differently substituted amides formally derived from a chiral amine, either E-2-(2-hydroxyphenyl)cinnamic acid or both E- and Z-2-(2-hydroxynaphthyl)cinnamic acid, are reported. These molecules display a restricted rotation about the C₂-C_aryl bond. The barriers to rotation about the C₂-C_aryl bond were measured by the dynamic ¹H NMR and were found to vary between 11.8 and 24.5 kcal mol⁻¹, depending on the substitution. In particular, E-2-(2-hydroxynapthyl)cinnamic amides, displayed a high barrier to rotation (ΔG_c^‡=24.4 kcal mol⁻¹) and could be isolated in both diastereomerically pure forms at room temperature. The X-ray structure of one E-2-(2-hydroxynapthyl)cinnamic amide, was resolved, enabling for the determination of the absolute configuration of the chiral axis (aR).     

Synthesis of 4H-3,1-benzoxazines, quinazolin-2-ones, and quinoline-4-ones by palladium-catalyzed oxidative carbonylation of 2-ethynylaniline derivatives

An effective and straightforward approach to the synthesis of 4H-3,1-benzoxazines 3 and 4, quinazolin-2-ones 5, and quinoline-4-one derivatives 6 and 7 is provided by palladium-catalyzed cyclization-alkoxycarbonylation of variously substituted 2-(trimethylsilanyl)ethynylaniline amide or urea derivatives 2. Reactions are carried out in 7:1 MeCN/MeOH at 65 or 75 degrees C in the presence of catalytic amounts of 10% Pd/C in conjunction with Bu(4)NI and KF and under 2.4 MPa of a 3:1 mixture of CO and air. Anti and syn 6-exo-dig cyclization modes account for the formation of the two stereoisomers. Isomerization of the vinylpalladium intermediate may occur as well. Formation of a double carbonylation product 7r and of a gem-dimethoxycarbonylation product 6s, whose structures have been determined by X-ray diffraction analysis, is justified through an unusual type of rearrangement.     

Olive mill wastewater treatment by a pilot-scale subsurface horizontal flow (SSF-h) constructed wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.     

The hydration of sodium dehydrocholate micelles

The hydration of micellised sodium dehydrocholate molecules was determined by viscosity measurements. It was found that there are 39 water molecules for each micellised surfactant molecule. About ten water molecules may be attributed to the hydration of the sodium carboxylate group. By assignation of two water molecules to each of the three carbonyl groups, the total hydration of a micellised sodium dehydrocholate molecule was estimated as about 16 water molecules. The remaining 23 water molecules per micellised sodium dehydrocholate molecule may be attributed to water trapped in the structure of micelles.     

Detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate by gas liquid chromatography of triacylglycerols

The development and in-house testing of a method for the detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate is described. A database consisting of the triacylglycerol profile of 74 genuine cocoa butter and 75 cocoa butter equivalent samples obtained by high-resolution capillary gas liquid chromatography was created, using a certified cocoa butter reference material (IRMM-801) for calibration purposes. Based on these data, a large number of cocoa butter/cocoa butter equivalent mixtures were arithmetically simulated. By subjecting the data set to various statistical tools, reliable models for both detection (univariate regression model) and quantification (multivariate model) were elaborated. Validation data sets consisting of a large number of samples (n = 4050 for detection, n = 1050 for quantification) were used to test the models. Excluding pure illipé fat samples from the data set, the detection limit was determined between 1 and 3% foreign fat in cocoa butter. Recalculated for a chocolate with a fat content of 30%, these figures are equal to 0.3-0.9% cocoa butter equivalent. For quantification, the average error for prediction was estimated to be 1.1% cocoa butter equivalent in cocoa butter, without prior knowledge of the materials used in the blend corresponding to 0.3% in chocolate (fat content 30%). The advantage of the approach is that by using IRMM-801 for calibration, the established mathematical decision rules can be transferred to every testing laboratory.     

Oriented thin films from soluble polythiophenes

The degree of orientation of thin films of eight different polymeric structures, belonging to the class of soluble polyalkylthiophenes (PATs) has been studied. Thin films of the polymers, obtained by spin coating onto glass substrates, were oriented by means of the rubbing technique. The degree of orientation is related to the regioregularity of the system: highly regioregular polymers can be oriented, while regiorandom materials are not oriented. The degree of orientation can be improved by thermal annealing of the oriented films. As a result of annealing, which was performed at different temperatures according to the thermal behavior of the polymers, it was possible to increase the polarization ratio for poly(3-decylthiophene) up to 12–13 as detected from the UV-vis spectra in polarized light. Moreover in the investigated PATs, both the key role of molecular weight and its distribution for achieving a high orientation degree has been assessed. Copyright © 2003 John Wiley & Sons, Ltd.     

Template evaporation method for controlling anatase nanocrystal size in ordered macroporous TiO2

The importance of pure-phase titanium oxide materials as catalysts, sensors, and photonic band-gap materials has been growing steadily. Recently, more attention has been focused on nanostructured titanium oxide showing controlled and periodic porosity on a nanometric scale. The nanocrystal size control of porous nanostructured titanium oxide in an anatase form is a crucial step for the organic template method. Simple template removal by evaporation in an inert atmosphere is reported in this article and compared with the calcination technique usually reported in the literature. The proposed method allows the formation of a double-porous (macro and meso) anatase phase. We demonstrate that it highly preserves the macropore order into a titanium oxide material and induces narrowly dispersed mesopores by controlling the nano-crystal size that is kept around 6 nm. For the proposed method, polystyrene beads are particularly suitable as templates, being evaporated in the temperature range of anatase existence. The final high surface area makes the materials appealing for applications as photocatalysts or sensors.     

Unprecedented detection of inherent chirality in uranyl-salophen complexes

In complexes with the uranyl dication salophen ligands are highly puckered. This implies that non-symmetrically substituted uranyl-salophen derivatives exist in principle as a pair of enantiomers. However, due to easy disrotations about the bonds connecting the phenoxide units to the imine carbons, the rate of interconversion between enantiomeric forms of simple, sterically unhindered compounds is extremely fast. Bulky substituents in appropriate positions decrease the interconversion rate and make this novel type of inherent chirality detectable by 1H and 13C NMR.     

GC-MS in space research: decoding complex isothermal chromatograms recovered from space missions

An analytical procedure is described to study GC-MS isothermal chromatograms simulating those recovered from space missions: in fact GC plays a predominant role in space missions devoted to characterizing the chemical composition of extra-terrestrial atmospheres. SIM (selected ion monitoring) detection was used for monitoring selected chemical classes: a simplified chromatogram can be obtained giving information on the chemical composition of the complex mixture. Since only isothermal GC chromatograms are allowed by flight constraints, a time axis transformation is required to make them homogeneous: i.e., constant retention increments for CH2 additions in terms of a homologous series. The order in the linearized chromatogram can be simply singled out with a chemometric approach based on the study of the Autocovariance Function (ACVF) computed on the digitized chromatogram: the plot of the experimental autocorrelation function (EACF) shows well-shaped peaks if constant interdistances are repeated in different regions of the chromatogram. The method was applied to standard mixtures representative of planetary atmospheres--hydrocarbons, nitriles and oxygenated compounds with between 3 and 12 carbon atoms--analyzed in flight simulating conditions. The coupling of the selectivity of SIM detection with the interpretation power of the EACF procedure proves to be a powerful tool for interpreting data recovered from space missions: the chemical composition of the mixture can be identified by handling the raw SIM chromatograms.