Composite Polyamide 6/Polypyrrole Conductive Nanofibers

Conductive Polyamide 6 (PA‐6) nanofibers were prepared by making a conductive polypyrrole coating obtained by a polymerization of pyrrole molecules directly on the fiber surface. A solution of PA‐6 added with ferric chloride in formic acid has been electrospun and the fibers obtained showed an average diameter of 260 nm with a smooth surface. The fibers have been then exposed to pyrrole vapours and a compact coating of polypyrrole was formed on the fiber surface. The growth of the coating was monitored by measuring the increment of the fiber diameter and by FT‐IR spectroscopy. The same technique was used to study the interaction between the ferric chloride and the polyamide chains. The polypyrrole coating on the fibers turned out to be conductive with a pure resistive characteristic and the stability of the conductivity was evaluated in air at room temperature.

     

Macrocyclic Tetramers—Structural Investigation of Peptide-Peptoid Hybrids

Outstanding affinity and specificity are the main characteristics of peptides, rendering them interesting compounds for basic and medicinal research. However, their biological applicability is limited due to fast proteolytic degradation. The use of mimetic peptoids overcomes this disadvantage, though they lack stereochemical information at the α-carbon. Hybrids composed of amino acids and peptoid monomers combine the unique properties of both parent classes. Rigidification of the backbone increases the affinity towards various targets. However, only little is known about the spatial structure of such constrained hybrids. The determination of the three-dimensional structure is a key step for the identification of new targets as well as the rational design of bioactive compounds. Herein, we report the synthesis and the structural elucidation of novel tetrameric macrocycles. Measurements were taken in solid and solution states with the help of X-ray scattering and NMR spectroscopy. The investigations made will help to find diverse applications for this new, promising compound class.     

Synthesis of pyrrolo[1,3]diazepines by a dipolar cycloaddition—retro-Mannich domino reaction

Microwave irradiation facilitated the synthesis of 4-arylthio-3-oxazolin-5-ones from ethyl cyanoformate, thiophenol, and cyclic ketones. Subsequent decarboxylation and in situ [3+2] cycloaddition provided novel 2,3,4,5-tetrahydro-1H-pyrrolo[1,2-c][1,3]diazepine scaffolds after a spontaneous retro-Mannich domino reaction.     

Calorimetric evaluation of the interaction and absorption of eicosapentaenoic acid by biomembrane models

The interaction of eicosapentaenoic acid, a polyunsaturated fatty acid belonging to the omega-3 class, with biomembrane models represented by multilamellar or unilamellar vesicles made of dimyristoylphosphatidylcholine was monitored by means of differential scanning calorimetry technique. The calorimetric analysis of vesicle prepared in the presence of increasing molar fraction of eicosapentaenoic acid was carried out to show its maximum interaction with biomembrane models evaluating the effects of eicosapentaenoic acid on the biomembrane models thermotropic parameters (transition temperature and enthalpy variation). Furthermore, in order to detect the influence of the presence of hydrophilic or lipophilic media on the entity of the compound absorption by the biomembrane models, kinetic experiments were carried out.The results indicate that eicosapentaenoic acid strongly interacts with the biomembrane models depressing the transition temperature and the enthalpy variation. Eicosapentaenoic acid is absorbed by the biomembrane models and the absorption is affected by the used medium; in fact a bigger absorption happens in the presence of a lipophilic medium.     

Low molecular weight proteins in urines from healthy subjects as well as diabetic,nephropathic and diabetic‐nephropathic patients: a MALDI study

Urine samples from healthy subjects as well as diabetic, nephropathic and diabetic‐nephropathic patients were analyzed by matrix assisted laser desorption/ionization (MALDI) mass spectrometry in order to establish evidence of some possible differences in the peptide profile related to the pathological states. Multivariate analysis suggested the possibility of a distinction among the considered groups of patients. Some differences have been found, in particular, in the relative abundances of three ions at m/z 1912, 1219 and 2049. For these reasons, further investigation was carried out by MALDI/TOF/TOF to determine the sequence of these peptides and, consequently, to individuate their possible origin. By this approach, the peptide at m/z 1912 was found to originate from uromodulin, and its lower expression in the case of nephropathy can be well related to the pathological condition. Ions at m/z 2049 and 1219 originate from the collagen α‐1(I) chain precursor and from the collagen α‐5 (IV) chain precursor, respectively, and, also in this case, their different expressions can be related to the pathologies under investigation. The obtained data seem to indicate that urine is an interesting biological fluid to investigate on the peptide profile and to obtain, consequently, information on the dismetabolism activated by specific pathologies. Copyright © 2009 John Wiley & Sons, Ltd.     

Signal processing to evaluate parameters affecting SPE for multi‐residue analysis of personal care products

This paper discusses the development of a comprehensive method for the simultaneous analysis of personal care products (PCPs) based on SPE and GC‐MS. The method was developed on 29 target compounds to represent PCPs belonging to different chemical classes: surfactants in detergents (alkyl benzenes), fragrances in cosmetics (nitro and polycyclic musks), antioxidants and preservatives (phenols), plasticizers (phthalates) displaying a wide range of volatility, polarity, water solubility. In addition to the conventional C₁₈ stationary phase, a surface modified styrene divinylbenzene polymeric phase (Strata^TM X SPE cartridge) has been investigated as suitable for the simultaneous extraction of several PCPs with polar and non‐polar characteristics. For both sorbents different solvent compositions and eluting conditions were tested and compared in order to achieve high extraction efficiency for as many sample components as possible. Comparison of the behavior of the two cartridges reveals that, overall, Strata‐X provides better efficiency with extraction recovery higher than 70% for most of the PCPs investigated. The best results were obtained under the following operative conditions: an evaporation temperature of 40°C, elution on Strata‐X cartridge using a volume of 15 mL of ethyl acetate (EA) as solvent and operating with slow flow rate (–10 KPa). In addition to the conventional method based on peak integration, a chemometric approach based on the computation of the experimental autocovariance function (EACVF_tot) was applied to the complex GC‐MS signal: the percentage recovery and information on peak abundance distribution can be evaluated for each procedure step. The PC‐based signal processing proved very helpful in assisting the development of the analytical procedure, since it saves labor and time and increases result reliability in handling GC complex signals.     

Hydrogen Bonding in Fluorinated Amides: FTIR,Two Dimensional Correlation Spectroscopy and DFT Calculations

Fluorinated macromers with amidic functional groups are used as additives in several high tech applications. We show here how aggregation phenomena related to hydrogen bonding are one of the key factor determining their chemical/physical and macroscopic properties. IR spectra are analyzed depending on different external parameters such as the concentration of amide groups and temperature. The experimental findings have been interpreted by means of DFT (Density Functional Theory) calculations on suitable molecular models. Moreover, 2D correlation spectroscopy has been applied to different sets of data, considering concentration and temperature as perturbing variables. The two dimensional correlation approaches confirmed the computational results and give an overall interpretation of the effects due to concentration and temperature.     

Difficulties in fumonisin determination: the issue of hidden fumonisins

In this paper, the results obtained by five independent methods for the quantification of fumonisins B₁, B₂, and B₃ in raw maize are reported. Five naturally contaminated maize samples and a reference material were analyzed in three different laboratories. Although each method was validated and common calibrants were used, a poor agreement about fumonisin contamination levels was obtained. In order to investigate the interactions among analyte and matrix leading to this lack of consistency, the occurrence of fumonisin derivatives was checked. Significant amounts of hidden fumonisins were detected for all the considered samples. Furthermore, the application of an in vitro digestion protocol to raw maize allowed for a higher recovery of native fumonisins, suggesting that the interaction occurring among analytes and matrix macromolecules is associative rather than covalent. Depending on the analytical method as well as the maize sample, only 37–68% of the total fumonisin concentrations were found to be extractable from the samples. These results are particularly impressive and significant in the case of the certified reference material, underlying the actual difficulties in ascertaining the trueness of a method for fumonisin determination, opening thus an important issue for risk assessment.     

Thin lead sheets in the decorative features in Pavia Charterhouse

The facade of the church of the Pavia Charterhouse, built at the end of the 15th century, shows outstanding decorative features made of different stone materials, such as marbles, breccias and sandstones. Magnificent ornamental elements are made of thin lead sheets, and some marble slabs are inlaid with them. Metal elements are shaped in complex geometric and phytomorphic design, to form a Greek fret in black contrasting with the white Carrara marble. Lead pins were fixed to the back of the thin lead sheets with the aim of attaching the metal elements to the marble; in so doing the pins and the lead sheets constitute a single piece of metal. In some areas, lead elements have been lost, and they have been substituted with a black plaster, matching the colour of the metal. To the authors' knowledge, this kind of decorative technique is rare, and confirms the refinement of Renaissance Lombard architecture. This work reports on the results of an extensive survey of the white, orange and yellowish layers, which are present on the external surface of the lead. The thin lead sheets have been characterized and their state of conservation has been studied with the aid of Optical Microscopy, SEM-EDS, FTIR and Raman analyses. Lead sulphate, lead carbonates and oxides have been identified as decay products.