Ring Vibrations to Sense Anionic Ibuprofen in Aqueous Solution as Revealed by Resonance Raman

We unravel the potentialities of resonance Raman spectroscopy to detect ibuprofen in diluted aqueous solutions. In particular, we exploit a fully polarizable quantum mechanics/molecular mechanics (QM/MM) methodology based on fluctuating charges coupled to molecular dynamics (MD) in order to take into account the dynamical aspects of the solvation phenomenon. Our findings, which are discussed in light of a natural bond orbital (NBO) analysis, reveal that a selective enhancement of the Raman signal due to the normal mode associated with the C–C stretching in the ring, νC=C, can be achieved by properly tuning the incident wavelength, thus facilitating the recognition of ibuprofen in water samples.     

Prompt and Long-Lived Anti-Kasha Emission from Organic Dyes

Anti-Kasha behavior has been the subject of intense debate in the last few years, as demonstrated by the high number of papers appearing in the literature on this topic, dealing with both mechanistic and applicative aspects of this phenomenon. Examples of anomalous emitters reported in the last 10 years are collected in the present review, which is focused on strictly anti-Kasha organic molecules displaying radiative deactivation from S_n and/or T_n, with n greater than 1.     

Optimized use of a 50 μm ID secondary column in comprehensive two-dimensional gas chromatography–mass spectrometry

The objective of the present research is directed towards the optimized use of a 50 μm ID secondary column, in a comprehensive two-dimensional gas chromatography–quadrupole mass spectrometry (GC × GC–qMS) system. The analytical aim was achieved by exploiting a split-flow GC × GC approach, and a rapid-scanning qMS instrument. The stationary phase combination consisted of an apolar (silphenylene polymer) 30 m × 0.25 mm ID column, linked by means of a Y-union, to an MS-connected 1 m × 0.05 mm ID polar one [poly(ethyleneglycol)], and to a 0.20 m × 0.05 mm ID uncoated capillary segment; the latter was connected to a manually operated split-valve. It will be herein demonstrated that the split-flow GC × GC approach, successfully employed in previous H₂-based, flame ionization detection experiments, provides equally satisfactory results using mass spectrometric detection and helium as carrier gas. An optimized split-flow GC × GC–qMS method was developed and exploited for the analysis of a perfume sample. The results attained were compared with those observed using the same analytical column combination, but with no flow-splitting. It was found that it is not convenient to employ a 50 μm ID secondary column in a conventional GC × GC–MS instrument. On the contrary, the use a 50 μm ID secondary column, in a split-flow, twin-oven system, provided a good performance. A recently developed comprehensive chromatography software was used for data processing.     

LC/ESI-MS/MS analysis outlines the different fumonisin patterns produced by F. verticillioides in culture media and in maize kernels

Fumonisins are a family of food-borne mycotoxins with a wide spectrum of toxicological activities, produced by Fusarium verticillioides. Twenty-eight fumonisin analogues have been characterised so far, which can be separated into four main groups, identified as fumonisin A, B, C and P, being fumonisin B the most widely occurring in maize and corn-based food. In this work, major and minor fumonisin analogues produced by F. verticillioides have been determined by the development of a suitable tandem mass spectrometry procedure for target compound identification and quantification. The method has been applied to the determination of the major fumonisins in culture media of F. verticillioides and in mouldy maize. In addition to the main fumonisins produced by F. verticillioides, also secondary compounds such as FB4, FB5, FAs and FCs have been detected in both fungal liquid cultures and contaminated maize samples. The use of this method for quantification of major and minor fumonisins may be useful for an exhaustive evaluation of their occurrence and toxicological relevance in food; moreover, it may be applied for a better definition of the fumonisin biosynthetic pathways in different growing media as well as in maize. Copyright ? 2012 John Wiley & Sons, Ltd.     

YBCO step-edge SQUIDs by magnetron sputtering technique

Summary YBCO step-edge junction d.c. SQUIDs have been realized by using the Inverted Cylindrical Magnetron Sputtering (ICMS) technique. This last represents a novel technology for high-T _c Josephson junctions (HTSC). Steps are obtained by standard ion milling procedure on LaAlO₃ (100) substrates using Nb-masks patterned by reactive ion etching. Measurements of currentvs. voltage, maximum d.c. Josephson currentvs. magnetic field and SQUID voltage response measurements have been performed, also as a function of the temperature. Operating temperature as high as 77K has been achieved. At 4.2K the SQUIDs show a maximum voltage of flux transfer function (∂V/∂ϕ)_max=870 μV/Ф₀ and a good periodicity of theV-ϕ modulation up to 20Ф₀ without any sign of hysteresis. The ratio between the step height (h) and the film thickness (d) seems to play a fundamental role in determining Josephson properties of the bridges, these conditions being more severe with respect to most of the data available in literature. Paper presented at the ?VII Congresso SATT?, Torino, 4–7 October 1994.     

Reliability of fibres in solid-phase microextraction for routine analysis of the headspace of aromatic and medicinal plants

This article evaluates the HS-SPME recovery repeatability, intermediate precision and their performance over time when applied to HS-SPME sampling for quality control of medicinal and aromatic plants. Experiments were carried out on two sets of fibres coated with two different coatings and belonging to different lots (i.e 100 microm polydimethylsyloxane (PDMS) and Carboxen/divinylbenzene/PDMS 50/30 microm, l: 1 cm (CAR/DVB/PDMS)) and on chamomile (Matricaria chamomilla L.), sage (Salvia lavandulifolia Vahl.) and a standard solution containing 3-hexanol, isoamyl acetate, 1,8-cineole and menthol in diisobutyl phthalate. The performance of each set of fibres was evaluated by determining a group of complementary statistical parameters including: (i) repeatability of the absolute areas of each marker from each matrix with each fibre; (ii) intra-fibre repeatability of the total absolute areas of the markers of each matrix obtained with each fibre of each set; (iii) inter-fibre intermediate precision of the total absolute areas of the markers of each matrix obtained with all fibres of each set; and (iv) analysis of variance by one-way ANOVA with Fisher and Tukey tests. The influence of the number of analyses on fibre effectiveness (fibre life-time) was studied by linear regression analysis (LRA). The results proved that HS-SPME can successfully be used for routine control analysis of aromatic ad medicinal plants since both types of fibres showed good repeatability and intermediate precision of analytes recovery and consistency over time. Unlike data previously reported by other authors, CAR/DVB/PDMS coated fibres gave better results than those coated with PDMS. The fibre-life seemed mainly to be influenced by the number and conditions of samplings and nature of the matrix investigated.     

Magnetostructural Correlations in Tetrairon(III) Single‐Molecule Magnets

Tunable single‐molecule magnets : The spin‐level landscape in a series of Fe^III₄ single‐molecule magnets with propeller‐like structure was analyzed by means of high‐frequency EPR spectroscopy. The zero‐field splitting parameter D of the ground S=5 spin state correlates strongly with the pitch of the propeller γ (see picture), and thus provides a simple link between molecular structure and magnetic behavior.

     

Deuterium-depleted water: A new tracer to label pulmonary surfactant lipids in adult rabbits

Stable isotope tracing can be safely used for metabolic studies in animals and humans. The endogenous biosynthesis of lipids (lipogenesis) is a key process throughout the entire life but especially during brain and lung growth. Adequate synthesis of pulmonary surfactant lipids is indispensable for life. With this study, we report the use of deuterium-depleted water (DDW), suitable for human consumption, as metabolic precursor for lipogenesis. We studied 13 adult rabbits for 5 days. Four rabbits drank tap water (TW) and served as controls; in four animals, DDW was substituted to drinking water, whereas five drank deuterium-enriched water (DEW). After 5 days, a blood sample and a bronchoalveolar lavage (BAL) sample were collected. The ²H/¹H (δ²H) of BAL palmitic acid (PA) desaturated phosphatidylcholine (DSPC), the major phospholipid of pulmonary surfactant, and of plasma water was determined by high-resolution mass spectrometry. We found that the δ²H values of DDW, DEW and TW were −984 ± 2‰, +757 ± 2‰ and −58 ± 1‰, respectively. After 5 days, plasma water values were −467 ± 87‰, +377 ± 56‰ and −53 ± 6‰, and BAL DSPC-PA was −401 ± 27‰, −96 ± 38‰ and −249 ± 9‰ in the DDW, DEW and TW, respectively. With this preliminary study, we demonstrated the feasibility of using DDW to label pulmonary surfactant lipids. This novel approach can be used in animals and in humans, and we speculate that it could be associated with more favourable study compliance than DEW in human studies.     

Frequency- and Amplitude-Dependent Transmission of Stress Waves in Curved One-Dimensional Granular Crystals Composed of Diatomic Particles

We study the stress wave propagation in curved chains of particles (granular crystals) confined by bent elastic guides. We report the frequency- and amplitude-dependent filtering of transmitted waves in relation to various impact conditions and geometrical configurations. The granular crystals studied consist of alternating cylindrical and spherical particles pre-compressed with variable static loads. First, we excite the granular crystals with small-amplitude, broadband perturbations using a piezoelectric actuator to generate oscillatory elastic waves. We find that the linear frequency spectrum of the transmitted waves creates pass- and stop-bands in agreement with the theoretical dispersion relation, demonstrating the frequency-dependent filtering of input excitations through the diatomic granular crystals. Next, we excite high-amplitude nonlinear pulses in the crystals using striker impacts. Experimental tests verify the formation and propagation of highly nonlinear solitary waves that exhibit amplitude-dependent attenuation. We show that the wave propagation can be easily tuned by manipulating the pre-compression imposed to the chain or by varying the initial curvature of the granular chains. We use a combined discrete element (DE) and finite element (FE) numerical model to simulate the propagation of both dispersive linear waves and compactly-supported highly nonlinear waves. We find that the tunable, frequency- and amplitude-dependent filtering of the incoming signals results from the close interplay between the granular particles and the soft elastic media. The findings in this study suggest that hybrid structures composed of granular particles and linear elastic media can be employed as new passive acoustic filtering materials that selectively transmit or mitigate excitations in a desired range of frequencies and amplitudes.