UV-mediated decomposition of diazomalonates in benzene: Unexpected access to functionalized bicyclo[3.2.0]heptane skeleton

Upon irradiation with 300-nm UV light, the photolysis of diazomalonates in benzene unexpectedly affords 2,6-dicarboxylate bicyclo[3.2.0]hepta-2,6-dienes in low yields. These products are proven to be derived from cyclohepta-1,3,5-triene intermediates presumably via a tandem 1,5-carboxylate migration/[2+2] cycloaddition sequence.     

Diindeno-Fused Dibenzo[a,h]anthracene and Dibenzo[c,l]chrysene: Syntheses,Structural Analyses,and Properties

Diindeno-fused dibenzo[a,h]anthracene 6 and diindeno-fused dibenzo[c,l]chrysene 9 contain the key moieties 1,4-quinodipropene (1,4-QDP) and 2,6-naphthoquinodipropene (2,6-NQDP), respectively, and they both have an open-shell singlet ground state. The latter compound exhibits a strong biradical character and interesting properties, including a low ΔE_T−S (2.44 kcal mol⁻¹), a small HOMO–LUMO gap (1.06 eV), a wide photoabsorption range (250–1172 nm), and a large two-photon absorption cross-section (σ=1342±56 GM). This work verifies that 6 has a slightly larger HOMO–LUMO gap and ΔE_T−S than its helical isomer diindeno[2,1-f:1′,2′-j]picene (DIP), but is a much stronger two-photon absorber, verifying the important effect of geometry on the photophysical properties.     

Iron carbonyl complexes from 2-[2,3-diaza-4-(2-thienyl)buta-1,3-dienyl]thiophene: N---N bond cleavage and cyclometalation

When thienyl Schiff base 1, derived from 2-formylthiophene and hydrazine, reacted with Fe₂(CO)₉ in n-hexane, three major complexes were obtained: (1) a diironhexacarbonyl complex with two 2-thienylmethylideneamido bridging ligands 2, which resulted from the =N---N= bond cleavage of ligand 1; (2) a doubly cyclometalated di-μ-di-(η¹:η²-thienyl; η¹:η¹(N))bis(hexacarbonyldiiron) complex (3); and (3) a cyclometalated (μ-η¹:η²-thienyl; η¹:η¹(N))hexacarbonyldiiron complex (4). Molecular structures of compounds 1a, 1c, and 2a have been determined by single-crystal X-ray diffraction.     

A Thermodynamic Study of 1-Propanol–Glycerol–H2O at 25°C: Effect of Glycerol on Molecular Organization of H2O

The excess chemical potential, partial molar enthalpy, and volume of 1-propanol were determined in ternary mixtures of 1-propanol–glycerol–H₂O at 25°C. The mole fraction dependence of all these thermodynamic functions was used to elucidate the effect of glycerol on the molecular organization of H₂O. The glycerol molecules do not exert a hydrophobic effect on H₂O. Rather, the hydroxyl groups of glycerol, perhaps by forming clusters via its alkyl backbone with hydroxyl groups pointing outward, interact with H₂O so as to reduce the characteristics of liquid H₂O. The global hydrogen bond probability and, hence, the percolation nature of the hydrogen bond network is reduced. In addition, the degree of fluctuation inherent in liquid H₂O is reduced by glycerol perhaps by participating in the hydrogen bond network via OH groups. At infinite dilution, the pair interaction coefficients in enthalpy were evaluated and these data suggest a possibility that the interaction is mediated through H₂O.     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

New cyclopropyl-triterpenoids from the aerial roots of Ficus microcarpa

Four new cyclopropyl-triterpenes, 27-nor-3beta-hydroxy-25-oxocycloartane (1), (22E)-25,26,27-trinor-3beta-hydroxycycloart-22-en-24-al (2), 3beta-acetoxy-15alpha-hydroxy-13,27-cyclours-11-ene (3), 3beta-acetoxy-12alpha-formyloxy-13,27-cycloursan-11alpha-ol (4), together with (23E)-27-nor-3beta-hydroxycycloart-23-en-25-one (5) were isolated from the aerial roots of Ficus microcarpa. Compounds 3 and 4 are rare 13,27-cycloursane-type triterpenes. Their structures were elucidated by spectroscopic and chemical methods.     

Dichloro(2,2′‐diamino‐4,4′‐bi‐1,3‐thiazole‐N3,N3′)copper(II)

The title complex, [CuCl₂(C₆H₆N₄S₂)], has a flattened tetrahedral coordination. The Cu^II atom is located on a twofold rotation axis and is coordinated by two N atoms from a chelating 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and by two Cl atoms. Intramolecular hydrogen bonding exists between the amino groups of the 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and the Cl atoms. The intermolecular separation of 3.425 (1) Å between parallel bi­thia­zole rings suggests there is a π–π interaction between them.     

Preparation and characterization of H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/ZrO<Subscript>2</Subscript> catalyst for carbonation of methanol into dimethyl carbonate

A H₃PW₁₂O₄₀/ZrO₂ catalyst for effective dimethyl carbonate (DMC) formation via methanol carbonation was prepared using the sol–gel method. X-ray photoelectron spectra showed that reactive and dominant (63%) W(VI) species, in WO₃ or H₂WO₄, enhanced the catalytic performances of the supported ZrO₂. The mesoporous structure of H₃PW₁₂O₄₀/ZrO₂ was identified by nitrogen adsorption–desorption isotherms. In particular, partial sintering of catalyst particles in the duration of methanol carbonation caused a decrease in the Brunauer–Emmett–Teller surface area of the catalyst from 39 to 19 m²/g. The strong acidity of H₃PW₁₂O₄₀/ZrO₂ was confirmed by the desorption peak observed at 415 °C in NH₃ temperature-programmed desorption curve. At various reaction temperatures (T?=?110, 170, and 220 °C) and CO₂/N₂ volumetric flow rate ratios (CO₂/N₂?=?1/4, 1/7, and 1/9), the calculated catalytic performances showed that the optimal methanol conversion, DMC selectivity, and DMC yield were 4.45, 89.93, and 4.00%, respectively, when T?=?170 °C and CO₂/N₂?=?1/7. Furthermore, linear regression of the pseudo-first-order model and Arrhenius equation deduced the optimal rate constant (4.24?×?10^?3 min^?1) and activation energy (E_a?=?15.54 kJ/mol) at 170 °C with CO₂/N₂?=?1/7 which were favorable for DMC formation.     

Synthesis of an s-butyldibenz[a,h]acridine. Alkyl migration in the bernthsen reaction

The Bernthsen reaction between N-1-naphthyl-2-naphthylamine and 2-methylbutanoic acid and its anhydride at 200–230° for seven hours gives a low yield of 12- or 13-s-butyldibenz[a,h]acridine, instead of the expected 14-isomer. The parent molecule dibenz[a,h]acridine results from the same reaction conducted at 270° for thirteen hours. It is suggested that alkyl migration may have occurred in some other cases where the Bernthsen reaction was reported to yield 14-alkyldibenz[a,h]acridines.