On‐Line Determination of Arsenic Species in Sea Water by Selective Hydride Generation Coupled with Inductively Coupled Plasma — Mass Spectrometry

A method for direct de termination of total in organic arsenic (III+V), arsenic (III) and dimethylarsinate (DMA) in sea water was developed by combining continuous‐flow selective hydride generation and inductively coupled plasma mass spectrometry (ICP‐MS) is presented. The principle underlying selective hydride generation is based on proper control of the reaction conditions for achieving separation of the respective arsenic species. The effects of pH and composition of reaction media on mutual interference between the arsenic species were investigated in detail. The results indicate that the appropriate media for the selective determination of total in organic arsenic, DMA and As(III) are 6 M HNO₃, acetate buffer at pH = 4.63 and citrate buffer at pH = 6.54, respectively. The concentrations of total inorganic arsenic species, As(III+V), and As(III) were respectively deter mined and that of As(V) was obtained by the difference between them. As to the concentration of DMA, it was obtained after correction from the interference caused by As(III) and As(V). By following the established procedure, the detection lim its (as based on 3‐sigma criterion) for As(III+V), As(III) and DMA were 0.050, 0.009, and 0.002 ng/mL, respectively. There liability of the pro posed method was evaluated in terms of precision and spike addition. The results indicated that the precision of better than 3% and spike recovery of 95 to 105% for all the arsenic species tested in the natural sea water samples can be obtained.     

Optimizing separation conditions for polycyclic aromatic hydrocarbons in micellar electrokinetic chromatography

We report the separation of polycyclic aromatic hydrocarbons (PAHs) using 0.1% poly(ethylene oxide) (PEO) in micellar electrokinetic chromatography (MEKC). In the presence of PEO, adsorption of PAHs on the capillary wall was reduced, leading to better resolution and reproducibility. Effects of tetrapentylammonium iodide (TPAI), dextran sulfate (DS), methanol, and sodium lauryl sulfate (SDS) on the separation of PAHs were elucidated. In terms of resolution and speed, DS, compared to TPAI, is a better additive for separation of PAHs. When using 0.1% PEO solution containing 45% methanol, 50 mM SDS, and 0.02% DS, separation of 10 PAHs containing 2 to 5 benzene rings was accomplished in less than 12 min at 15 kV in a commercial CE system. The method has also been tested for separating seven PAHs with high quantum yields when excited at 325 nm using a He-Cd laser. Unfortunately, separation of the seven PAHs was not achieved and sensitivity diminished under the same conditions. To optimize sensitivity, resolution and speed, a stepwise technique in MEKC has been proposed. The seven PAHs were resolved in 35 min at 15 kV when separation was performed in 0.1% PEO solution containing 35 mM SDS, 40% methanol and 0.02% DS for 2 min, and subsequently in 0.1% PEO solution containing 20 mM SDS, 50% methanol, and 0.02% DS.     

2,4‐Diamino‐5‐(1‐naphthyl)‐3,5‐diaza‐1‐azoniaspiro[5.5]undeca‐1,3‐diene chloride

The title salt, C₁₈H₂₂N₅⁺·Cl^?, is a member of a new series of lipophilic 4,6‐di­amino spiro‐s‐triazines which are potent in­hib­itors of di­hydro­folate reductase. The protonated triazine ring deviates from planarity, whereas the cyclo­hexane ring adopts a chair conformation. A rather unusual hydrogen‐bonding scheme exists in the crystal. There is a centrosymmetric arrangement involving two amino groups and two triazine ring N atoms, with graph‐set R(8) and an N?N distance of 3.098 (3) Å, flanked by two additional R(8) systems, involving two amino groups, a triazine ring N atom and a Cl^? anion, with N?Cl distances in the range 3.179 (2)–3.278 (2) Å. Furthermore, the Cl^? anion, the protonated triazine ring N atom and an amino group form a hydrogen‐bonding system with graph‐set R(6).     

Hybridized local and charge-transfer excited state fluorophores enabling organic light-emitting diodes with record high efficiencies close to 20%

Pure organic emitters with full utilization of triplet excitons are in high demand for organic light-emitting diodes (OLEDs). Herein, through modulation of electron donors and introduction of phenyl rings as π spacers, we present three pure organic fluorophores (BCz, BTCz and BPTCz) with the hybridized local and charge-transfer (HLCT) excited state feature for OLED fabrication. Importantly, the introduction of π spacers in BPTCz not only enhances locally excited character with a fast radiative decay but also promotes intermolecular interactions to suppress non-radiative decays, contributing to a high solid-state fluorescence efficiency over 90%. Significantly, BPTCz not only endows its doped OLEDs with an external quantum efficiency (EQE) up to 19.5%, but also its non-doped OLED with a high EQE of 17.8%, and these outstanding efficiencies are the state-of-the-art performances of HLCT-based OLEDs.

Three purely organic fluorophores with a hybridized local and charge-transfer excited state feature are presented and enabled organic light-emitting diodes with record high external quantum efficiencies close to 20%.     

Two N,N′‐diaryl‐2,2,2‐trichloroethane‐1,1‐diamines: hydrogen‐bonded supramolecular structures in one and two dimensions

The molecules of 2,2,2‐trichloro‐N,N′‐diphenylethane‐1,1‐diamine, C₁₄H₁₃Cl₃N₂, are linked into (040) sheets by a combination of C—H...Cl and C—H...π(arene) hydrogen bonds. In 2,2,2‐trichloro‐N,N′‐bis(4‐methylphenyl)ethane‐1,1‐diamine, C₁₆H₁₇Cl₃N₂, the molecules are linked into C(7) chains by two independent C—H...Cl hydrogen bonds and one Cl...Cl contact.     

Two New Diterpenoids from Callicarpa pedunculata

Two new diterpenoids, pedunculatic acid A (= (4R,5α,7α)‐7‐ethoxy‐9β,13β‐dioxyabiet‐8(14)‐en‐18‐oic acid; 1 ) and pedunculatic acid B (= (4S,5α,12β)‐8β,14β‐epoxy‐12‐hydroxy‐11‐oxototaran‐19‐oic acid; 2 ), together with three known sesquiterpenoids, were isolated from the Chinese medicinal herb Callicarpa pedunculata R. Brown . Their structures were elucidated by spectroscopic analyses, including 1D‐ and 2D‐NMR, and by high‐resolution mass spectrometry.     

Thermodynamic Parameters for the Association of Fluorinated Benzenesulfonamides with Bovine Carbonic Anhydrase II

This paper describes a calorimetric study of the association of a series of seven fluorinated benzenesulfonamide ligands (C₆H_nF_5?nSO₂NH₂) with bovine carbonic anhydrase II (BCA). Quantitative structure–activity relationships between the free energy, enthalpy, and entropy of binding and pK_a and log P of the ligands allowed the evaluation of the thermodynamic parameters in terms of the two independent effects of fluorination on the ligand: its electrostatic potential and its hydrophobicity. The parameters were partitioned to the three different structural interactions between the ligand and BCA: the Zn^II cofactor–sulfonamide bond (≈65 % of the free energy of binding), the hydrogen bonds between the ligand and BCA (≈10 %), and the contacts between the phenyl ring of the ligand and BCA (≈25 %). Calorimetry revealed that all of the ligands studied bind in a 1:1 stoichiometry with BCA; this result was confirmed by ¹⁹F NMR spectroscopy and X‐ray crystallography (for complexes with human carbonic anhydrase II).     

A new tetrathiafulvalene–diamide cation salt with [Cu2Br4]2− anions

The title salt, bis[2,3‐bis(aminocarbonyl)‐8,9‐bis(methylsulfanyl)tetrathiafulvalenium] di‐μ‐bromido‐bis[bromidocopper(II)], (C₁₀H₁₀N₂O₂S₆)₂[Cu₂Br₄], contains 2,3‐bis(aminocarbonyl)‐8,9‐bis(methylsulfanyl)tetrathiafulvalenium radical cations, [DMT‐TTF(CONH₂)₂]^·+, and [Cu₂Br₄]²⁻ anions. The cations are associated across centres of inversion in a head‐to‐tail fashion via short face‐to‐face S...S stacking (TTF moiety). These dimers are further assembled into a one‐dimensional chain structure via interdimer double S...S contacts involving the methylsulfanyl groups. The one‐dimensional chains give rise to a two‐dimensional structure through intermolecular double N—H...O hydrogen bonds involving the amide group. The [Cu₂Br₄]²⁻ anions, which straddle centres of inversion, are located between the cation layers. Electron paramagnetic resonance measurements show a radical signal, indicating that the two TTF^·+ radicals are not completely coupled in the dimer.     

Diaquabis(2,5‐dihydroxybenzoato‐κO)bis(1,10‐phenanthroline‐κ2N,N′)strontium(II) bis(1,10‐phenanthroline) tetrahydrate

The title compound, [Sr(C₇H₅O₄)₂(C₁₂H₈N₂)₂(H₂O)₂]·2C₁₂H₈N₂·4H₂O, consists of an Sr^II complex, uncoordinated phenanthroline (phen) molecules and solvent water molecules. The Sr^II ion is located on a twofold axis and is coordinated by two phen ligands, two dihydroxybenzoate anions and two water molecules in a distorted tetragonal antiprismatic geometry. Partially overlapped arrangements exist between parallel coordinated and parallel uncoordinated phen rings; the face‐to‐face separations between the former (coordinated) and the latter (uncoordinated) rings are 3.436 (13) and 3.550 (14) Å, respectively. This difference suggests the effect of metal coordination on π–π stacking between phen rings.     

L-脯氨酸催化下甲基酮和1-芳基-2,2,2-三氟乙酮的不对称Aldol反应

Direct asymmetric aldol addition of methyl ketones to 2,2,2-trifluoro-1-phenylethanone and its ring-substituted derivatives was achieved using L-proline as a chiral promoter. Various optically active β-trifluoromethyl-β-hydroxy ketones were obtained in almost quantitative yields with moderate enantioselectivities up to 64 % ee.