Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

The catalyst used in fluidized catalytic cracking (FCC) units of refineries after several recovery cycles in regeneration units, reduces its activity and it is partially substituted by new catalyst in the process. As it has a high silicon and aluminum oxides content, the pozzolanic properties of a Brazilian FCC spent residual catalyst, used in different substitution degrees to cement, were evaluated by three thermal analysis techniques during the early stages of hydration of a type II Portland cement. NCDTA curves show in real time that the residual catalyst, accelerates the stages of cement hydration. TG and DSC curves of respective pastes after 24 h of hydration evidence the pozzolanic activity of the waste, respectively, by the lower water mass loss during the dehydroxylation of the residual calcium hydroxide and by the lower dehydroxylation endothermal effect. Within the analyzed period, the higher is the cement substitution degree, the higher is the pozzolanic activity of the residual catalyst.     

Sorption behavior of Co(II) on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the presence of humic acid

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The extent of sorption of divalent metal cations is controlled by a number of factors including cosorbing or complexing. In this work, the effects of pH, humic acid HA/Co(II) addition orders, ionic strength, concentration of HA, and foreign cations on the Co(II) sorption on γ-Al₂O₃ in the presence of HA were investigated. The sorption isotherms of Co(II) on γ-Al₂O₃ in the absence and presence HA were also studied and described by using S-type sorption model. The experimental results showed that the Co(II) sorption is strongly dependent on the pH values, concentration of HA, but independent of HA/Co(II) addition orders, ionic strength, and foreign cations in the presence of HA under our experimental conditions. The results also indicated that HA enhanced the Co(II) sorption at low pH, but reduced the Co(II) sorption at high pH. It was hypothesized that the significantly positive influence of HA at low pH on the Co(II) sorption on γ-Al₂O₃ was attributed to strong surface binding of HA on γ-Al₂O₃ and subsequently the formation of ternary surface complexes such as ≡S-OOC-R-(COO⁻) _x Co^2−x . Chemi-complexation may be the main mechanism of the Co(II) sorption on γ-Al₂O₃ in the presence of HA.     

Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Relaxation dynamics of 2,7- and 3,6-distyrylcarbazoles in solutions and in solid films: mechanism for efficient nonradiative deactivation in the 3,6-linked carbazole

We performed time-resolved spectral investigations of two distyrylcarbazole derivatives, 2,7- and 3,6-distyrylcarbazole (2,7-DPVTCz and 3,6-DPVTCz, respectively), in dilute toluene solution and in solid films mixed with poly(methyl methacrylate) (PMMA). The lifetime of 2,7-DPVTCz in its excited state in solution is approximately 100 times as great as that of 3,6-DPVTCz, consistent with their photophysical nature. The former shows intense emission, but the latter is nearly nonfluorescent in a free environment. Moreover, the lifetime of 3,6-DPVTCz in its excited state increased also approximately 100 times when the molecule was encapsulated in a 3,6-DPVTCz/PMMA solid film, indicating that intramolecular motion of the molecule significantly affects the observed relaxation dynamics in a confined environment. Calculations on the excited states indicate that an efficient intersystem crossing is activated upon twisting of the bridged C-C single bond in a free 3,6-linked carbazole; such efficient deactivation is impractical in 2,7-linked carbazole or for 3,6-linked carbazole in a PMMA matrix. Information obtained from experiments on femtosecond fluorescence enables us to distinguish crucial relaxation processes in the excited state for a profound understanding of the details of vibrational and electronic relaxations of 3,6-DPVTCz in solution.     

Borate adsorption at Pt(111) in acidic medium

The adsorption/desorption process of borate was studied at Pt(111) in acidic solution by cyclic voltammetry. A so-called butterfly wave in the cyclic voltammogram of Pt(111) in HClO₄ shifted to negative direction upon the addition of boric acid with the disappearance of its sharp spikes. The shift in potential was found to be −57 mV with a tenfold increase of boric acid concentration. This illustrates that this anomalous wave is due to borate adsorption/desorption by a one-electron transfer process. The borate adsorption/desorption wave was observed to shift by −63 mV/pH. At pH>3, the anomalous wave splits forming two separate waves, depending on the pH and the scan rate. The appearance of two waves is assigned to the change in the adsorption mode of borate or the participation of OH in the adsorption process.     

Coordination of solvent molecules to VO(acac)<Subscript>2</Subscript> complexes in solution studied by hyperfine sublevel correlation spectroscopy and pulsed electron nuclear double resonance

Interactions and binding sites of the solvent molecules chloroform and ethanol to bis(acetylacetonate)oxovanadium(IV) (VO(acac)₂) complexes in (frozen) solutions have been investigated by pulsed electron nuclear double resonance, sum peak electron spin echo envelope modulation and hyperfine sublevel correlation spectroscopy. The experimental proton hyperfine coupling data of coordinating solvent molecules have been interpreted using quantum chemical calculations (density functional theory). Experimental and computed hyperfine couplings indicate that ethanol coordinates to vanadium in the equatorial plane of VO(acac)₂ and chloroform interacts via hydrogen bonding to oxygens of the acac ligands.     

Two new compounds derived from bufalin

The biotransformation of bufalin by cell suspension cultures of Platycodon grandiflorus was investigated and two new biotransformed products were obtained,which was 3-epi-telocinobufagin and 3-epi-bufalin-3-O-β-D-glucoside.     

Orientation control of perovskite thin films on glass substrates by the application of a seed layer prepared from oxide nanosheets

Orientation control of perovskite compounds was investigated by the application of a seed layer prepared from oxide nanosheets. An aqueous suspension of oxide nanosheets was prepared by the exfoliation of a layered compound of KCa₂Nb₃O₁₀ oxide grains. A seed layer composed of (TBA)Ca₂Nb₃O₁₀ nanosheets (TBA = tetrabutylammonium) was formed on a glass substrate by simply dip coating it in the suspension. Two kinds of perovskite compounds, LaNiO₃ (LNO) and Pb(Zr,Ti)O₃ (PZT) with a preferred orientation of (00l) were successfully grown on this seeded glass substrate. In this study, the relation between lattice mismatch and electrical properties is investigated. A large, oriented PZT film with a size of 5 ×4 cm shows an improved P-E hysteresis behavior by use of this orientation control.     

Stability analysis for uncertain nonlinear switched systems with infinite-time domain

Fuzzy Optimization and Decision Making - In this paper, an uncertain nonlinear switched system is a nonlinear switched system disturbed by subjective uncertainties, which can be illustrated by...     

Safety Stock Determination with Serially Correlated Demand in a Periodic-Review Inventory System

We consider a periodic-review inventory replenishment model with an order-up-to-R operating doctrine for the case of deterministic lead times and a covariance-stationary stochastic demand process. A method is derived for setting the inventory safety stock to achieve an exact desired stockout probability when the autocovariance function for Gaussian demand is known. Because the method does not require that parametric time-series models be fit to the data, it is easily implemented in practice. Moreover, the method is shown to be asymptotically valid when the autocovariance function of demand is estimated from historical data. The effects on the stockout rate of various levels of autocorrelated demand are demonstrated for situations in which autocorrelation in demand goes undetected or is ignored by the inventory manager. Similarly, the changes to the required level of safety stock are demonstrated for varying levels of autocorrelation.