The behaviour of micro-bitumen drops in aqueous clay environments

This study summarises the rheological behaviour of emulsion bitumen drops in the presence of aqueous solutions of de-ionised or process water (DIW or PW) containing montmorillonite clays (M) and/or calcium ions (Ca++). The presence of calcium ions and montmorillonite clays resulted in the plastic behaviour of bitumen drops. In a DIW+M+Ca++ system, increasing temperature and calcium ion concentration resulted in an increase in the number and degree of plastic bitumen drops. In the presence of considerable amounts of Ca++ ions and/or at higher experimental temperature, bitumen drops in a PW+M system exhibited no significant overall plasticity of their surfaces. Both calcium and sodium ions contained in process water compete with each other to occupy the montmorillonite clay surface. At the pH value of process water (pH congruent with8), increasing the temperature did not change the value of bitumen droplet zeta potential. Stability of bitumen-in-water emulsions at 22 degrees C showed that bitumen droplets coalesced upon contact in the DIW+M system. The addition of calcium ions (Ca++) led to the inhibition of coagulation and coalescence of bitumen droplets, which may indicate the formation of CaM aggregates at the bitumen-water interface.     

Two dimensional mapping of cancer cell extracts by liquid chromatography-capillary electrophoresis with ultraviolet absorbance detection

A two-dimensional liquid chromatography/capillary electrophoresis technique was developed for rapid and comprehensive mapping of cell extracts. The cell extracts were first separated by reversed-phase HPLC based on hydrophobicity. Fractions of the effluent from the HPLC system were collected into 96-well microtiter plates and dried under vacuum. The fractions were reconstituted with deionized water, separated by capillary array electrophoresis based on charge-to-size ratio, and detected by UV absorption at 214 nm. Prior to analysis by multiplexed capillary electrophoresis, the reconstituted fractions were concentrated on-column using large volume sample stacking with polarity switching. In this way, high-resolution analysis of even the minor components in the complicated mixture was possible.     

On-line nanoliter cycle sequencing reaction with capillary zone electrophoresis purification for DNA sequencing

An integrated system for DNA sequencing based on a nanoreactor for cycle-sequencing reaction coupled with on-line capillary zone electrophoresis (CZE) for purification and capillary gel electrophoresis (CGE) for separation is presented. Less than 100 nl of premixed reagent solution, which includes dye-labeled terminator pre-mix, bovine serum albumin and template, was hydrodynamically injected into a fused-silica capillary (75 microm I.D.) inside a laboratory-made microthermocycler for cycle sequencing reaction. In the same capillary, the reaction products were purified by CZE followed by on-line injection of the DNA fragments into another capillary for CGE. Over 540 base pairs (bp) of DNA can be separated and the bases called for single-standed DNA with 0.9% error rate. The total time was about 3.5 h, or a cycle time of 2 h with staggered operation. For double-stranded DNA, a longer reaction time was required and base calling up to 490 bp with 1.2% error rate was achieved. The whole system is readily adaptable to automated multiplex operation for DNA sequencing or polymerase chain reaction analysis.     

Radioactivity contents in building materials used in Hong Kong

The radioactivity contents in building materials used in Hong Kong were measured to determine the sources of the high indoor radon concentrations observed in local buildings. The radium contents and the radon emanation coefficients of different building materials were measured by high resolution γ-ray spectroscopy using germanium detectors. The radon exhalation rates were measured using scintillation cells by circulating the exhaled radon from building materials and obtaining the initial growth rates. The radium content and the radon exhalation rates of concrete and bricks used in Hong Kong were found to be higher than those in some other countries, resulting in high indoor radon concentrations probably due to the high radioactivity contents in the aggregates, granitic in nature, used in building materials.     

Catalysis in supercritical CO2 using dendrimer-encapsulated palladium nanoparticles

Dendrimer-encapsulated nanoparticles are shown to be versatile catalysts for both the hydrogenation of styrene and Heck heterocoupling of iodobenzene and methacrylate in supercritical CO2 (scCO2).     

Phase separation dynamics in driven diffusive systems

We study phase separation dynamics in a driven diffusive system. Our simulations are based on the Cahn-Hilliard equation with an additional flux term due to an external field. We study the dynamical scaling parallel and perpendicular to the field. A crossover is observed from isotropic domains at early times to extremely anisotropic domains at later times. We find that the inverse interfacial density (an isotropic measure of the domain size) increases ast , with =1/3, from early times independent of the field strength, even though we do not observe dynamical scaling during these times. Our results indicate that a growth exponent =1/3 may be more universal than previously expected. We analyze the dynamics in terms of surface driven instabilities and one-dimensional solitary waves.     

Heterometallic MIIRuIII2 compounds constructed from trans-[Ru(Salen)(CN)2]- and trans-[Ru(Acac)2(CN)2]-. Synthesis, structures, magnetic properties, and density functional theoretical study

The synthesis, structures, and magnetic properties of four cyano-bridged M(II)Ru(III)2 compounds prepared from the paramagnetic Ru(III) building blocks, trans-[Ru(salen)(CN)2]- 1 [H2salen = N,N'-ethylenebis(salicylideneimine)] and trans-[Ru(acac)2(CN)2]- (Hacac = acetylacetone), are described. Compound 2, {Mn(CH3OH)4[Ru(salen)(CN)2]2}.6CH3OH.2H2O, is a trinuclear complex that exhibits antiferromagnetic coupling between Mn(II) and Ru(III) centers. Compound 3, {Mn(H2O)2[Ru(salen)(CN)2]2.H2O}n, has a 2-D sheetlike structure that exhibits antiferromagnetic coupling between Mn and Ru, leading to ferrimagnetic-like behavior. Compound 4, {Ni(cyclam)[Ru(acac)2(CN)2]2}.2CH3OH.2H2O (cyclam = 1,4,8,11-tetraazacyclotetradecane), is a trinuclear complex that exhibits ferromagnetic coupling. Compound 5, {Co[Ru(acac)2(CN)2]2}n, has a 3-D diamond-like interpenetrating network that exhibits ferromagnetic ordering below 4.6 K. The density functional theory (DFT) method was used to calculate the molecular magnetic orbitals and the magnetic exchange interaction between Ru(III) and M(II) (Mn(II), Ni(II)) ions.     

Hexanes/acetonitrile: a binary solvent system for the efficient monosilylation of symmetric primary and secondary diols

Symmetric diols are useful compounds in the synthesis of natural products, their value often dependent on their successful monoprotection. A general and simple method for the monosilylation of symmetrical primary and secondary diols is reported. The method exploits the solubility differential of diols and their monosilylated counterparts in a binary hexanes/acetonitrile solvent system.