THE VISCOELASTIC EFFECT ON THE FORMATION OF MESO-GLOBULAR PHASE OF DILUTE HETEROPOLYMER SOLUTIONS

Linear homopolymer chains in poor solvent exist either as individual crumpled single chain globules or asmacroscopic precipitate, depending on whether the solution is in the one- or the two-phase region. However, linearheteropolymer chains in dilute solution might be able to form stable mesoglobules made up of a limited number of chains ifthe degree of amphiphilicity of the chain is sufficiently high and the experimental conditions are appropriate. The self-assembly of block copolymers in a selective solvent is typical of such examples. In practice, the formation of stablemesoglobules can be directly related to the formation of novel polymeric nanopaticles in solution. In this article, we willaddress the formaton of mesoglobular phase not only on the basis of thermodynamics, but also from a kinetic point of view,which leads to the discussion of how viscoelasticity can affect the phase behavior of heteropolymer chains in dilute solution.The formation and stabilization of several different kinds of novel polymeric nanopedicles will be used to illustrate ourdiscussion.     

Aminonaphthalic anhydrides as red-emitting materials: electroluminescence, crystal structure, and photophysical properties

The red and orange emitters (ANA-1-3) consisting of a 4-amino-1,8-naphthalic anhydride group were synthesized. The lowest absorption band of these ANA molecules centered at approximately 450 nm is assigned to be a charge-transfer transition with emission at 514-536 nm in nonpolar solvents such as n-hexane and at approximately 590-640 nm in polar solvents such as THF and CH(2)Cl(2) and in the solid states. Emission lifetimes are measured with time-correlated single photon counting. Shorter lifetimes are observed for the ANA molecules when dissolved in polar solvents compared with those in nonpolar solvents. Strong dipole-dipole interaction of ANA molecules with solvents is indicated. At high concentrations the measured emission lifetimes, generally shortened from self-quenching, are found to remain about the same order of magnitude in ANAs. This implies that the exciton states of aggregates are formed and they exhibit a relatively long lifetime. Crystallographic data of 4-(phenyl antracen-9-yl) (ANA-2) and 4-(phenyl-2-naphthyl) amino-1,8-naphthalic anhydrides (ANA-3) show that the molecules exist as dimeric structures with antiparallel head-to-tail stacking of naphthalic anhydride planes in addition to other pi-pi stacking. The strong dipole-dipole interactions and the pi-pi stacking account for the observed red-shifted emissions of ANAs in the powders. For films prepared from vacuum sublimation, a structure similar to that in the crystal but with less crystalline order is expected based on the emission wavelength. Several electroluminescent devices based on these ANAs are reported here; they emit orange-red light at 602-628 nm with high brightness and steady external quantum efficiency.     

Identification of diastereomeric chlorophyll allomers by atmospheric pressure chemical ionisation liquid chromatography/tandem mass spectrometry

Atmospheric pressure chemical ionisation liquid chromatography/mass spectrometry (APCI-LC/MS) has been used for identification of the epimers of hydroxy, methoxy and methoxylactone allomers of chlorophyll a (13(2)-HO-chl a, 13(2)-MeO-chl a and 15(1)-MeO-lact-chl a), the hydroxy allomer of bacteriochlorophyll a (13(2)-HO-bchl a) and the hydroxy and methoxylactone allomers of bacterioviridin a (13(2)-HO-bvir a and 15(1)-MeO-lact-bvir a). The APCI mass spectra show that facile fragmentations involve the methoxyl or hydroxyl groups at the C-13(2) or C-15(1) chiral centres. Losses involving the C-13(2) or C-15(1) hydroxyl or methoxyl groups occur more easily from the S-epimer than from the R-epimer due to the greater relief of the steric strain associated with interaction with the bulky C-17 substituent. The differences in mass spectrometric fragmentation can be used as a diagnostic tool for the assignment of the stereochemical configuration at the C-13(2) or C-15(1) chiral centres.     

Study on the Thermodynamic Stabilities of Te-Substituted Di-n-butyltellurium Ylide

SincethediscoveryofphosphoniumylidebyWittig',carbanionsstabilizedbyadjacentfifthorsixthgrouponiumionshavebeendevelopedasavaluablereactiveintermediate.However,despitethegreateffortsinylidechemistryinthepastfewdecades',relativelylittleisknownaboutthethermodynamicstabilitiesofylidecarbanions.Itiswellknowthatthequantitativemeasuresofthecarbanionstabilityhavecontributedagreatdealtothedevelopmentoforganicchemistry,thereforeitshouldbeexpectedthattheknowledgeaboutylidestabilitywillalsoprovidavaluableg…     

Application of ionic liquid halide nucleophilicity for the cleavage of ethers: a green protocol for the regeneration of phenols from ethers

We have used the high nucleophilicity of bromide ion in the form of the ionic liquid, 1-n-butyl-3-methylimidazolium bromide ([bmim][Br]), for the nucleophilic displacement of an alkyl group to regenerate a phenol from the corresponding aryl alkyl ether. Using 2-methoxynaphthalene (1) as a model compound, we found that the combination of ionic liquid [bmim][Br] and p-toluenesulfonic acid with warming effected demethylation in 14 h, affording the desired product 2-naphthol (2) in good yield (97%). Various other protic acids (MsOH, hydrochloric acid (35%), dilute sulfuric acid (50%)) could be used as a proton source in this demethylation reaction. Under the same conditions, cleavage of alkyl alkyl ether 2-(3-methoxypropyl)naphthalene yielded mixture of corresponding 2-(3-bromopropyl)naphthalene and 2-(3-hydroxypropyl)naphthalene. Dealkylation of various aryl alkyl ethers could also be achieved using significantly reduced (i.e., stoichiometric) amounts of concentrated hydrobromic acid (47%) in the ionic liquid. Both procedures afforded the desired products in moderate to good yield; however, cleavage of aryl alkyl cyclic ether, 2,3-dihydrobenzofuran, resulted in low yield of the desired product o-2-bromoethylphenol. The convenience of this method for ether cleavage and its effectiveness using only a moderate excess of hydrobromic acid make it attractive as a green chemical method.     

High-speed gradient parallel liquid chromatography/tandem mass spectrometry with fully automated sample preparation for bioanalysis: 30 seconds per sample from plasma

In this work, a high-throughput and high-performance bioanalytical system is described that is capable of extracting and analyzing 1152 plasma samples within 10 hours. A Zymark track robot system interfaced with a Tecan Genesis liquid handler was used for simultaneous solid-phase extraction of four 96-well plates in a fully automated fashion. The extracted plasma samples were injected onto four parallel monolithic columns for separation via a four-injector autosampler. The use of monolithic columns allowed for fast and well-resolved separations at a considerably higher flow rate without generating significant column backpressure. This resulted in a total chromatographic run cycle time of 2 min on each 4.6 x 100 mm column using gradient elution. The effluent from the four columns was directed to a triple quadrupole mass spectrometer equipped with an indexed four-probe electrospray ionization source (Micromass MUX interface). Hence, sample extraction, separation, and detection were all performed in a four-channel parallel format that resulted in an overall throughput of about 30 s per sample from plasma. The performance of this system was evaluated by extracting and by analyzing twelve 96-well plates (1152) of human plasma samples spiked with oxazepam at different concentrations. The relative standard deviation (RSD) of analyte sensitivity (slope of calibration curve) across the four channels and across the 12 plates was 5.2 and 6.8%, respectively. An average extraction recovery of 77.6% with a RSD of 7.7% and an average matrix effect of 0.95 with a RSD of 5.2% were achieved using these generic extraction and separation conditions. The good separation efficiency provided by this system allowed for rapid method development of an assay quantifying the drug candidate and its close structural analog metabolite. The method was cross-validated with a conventional liquid chromatography/tandem mass spectrometry (LC/MS/MS) assay.     

Determination of lead in whole blood with a simple flow-injection system and computerized stripping potentiometry

An automated (24 samples/hour) procedure is described for the determination of lead (0–1000 μg l^?1) in human blood based on flow-injection stripping potentiometry. The samples are diluted 20-fold with 0.5 M hydrochloric acid containing 100 mg l^?1 mercury and 40 μg l^?1 cadmium (II), and a 1.1 ml aliquot is injected into the flow system. With a mercury-coated carbon fibre as working electrode, lead (II) is determined by using cadmium (II) as internal standard and a calibration graph prepared from bovine blood. Analyses of two human blood reference samples yielded results of 335±37 and 691±24 μg l^?1 lead, the certified values being 332 and 663 μg l^?1, respectively.     

Tocopherols and Triterpenoids from Sida acuta

A new tocopherol derivative, 7_a‐methoxy‐α‐tocopherol ( 1 ), and a new taraxastane triterpene, taraxast‐1,20(30)‐dien‐3‐one ( 5 ), together with four known compounds, β‐tocopherol ( 2 ), α‐tocopherol ( 3 ), α‐tocospiro B ( 4 ) and taraxasterone ( 6 ) were isolated from the whole plant of Sida acuta. Their structures were elucidated by spectral analysis including MS, 1D and 2D‐NMR spectroscopy. Among those compounds, compounds 1 , 2 , and 3 showed significant antioxidant effect (EC₅₀ = 86.9, 68.2, and 70.9 μM, respectively) in the DPPH radicals scavenging activity assay.     

Triboelectric pulsed direct current for self-powered sterilization of cellulose fiber

A variety of liquid energy exists in papermaking engineering and has not yet been developed and utilized. In addition, for the papermaking industry, the presence of slime can seriously affect the quality of the finished paper and can lead to paper breaking. The current slime control strategies cannot completely solve the problem and also have some low toxicity. In this study, a method of self-powered sterilization of cellulose fibers by using triboelectric pulsed direct current is reported. A liquid–solid triboelectric nanogenerator (L–S TENG) was used to convert the liquid energy of nanocellulose suspension into electrical energy and convert this electrical energy into pulsed direct current for self-powered sterilization of cellulose fiber. A hydrophobic coating material is used as solid triboelectric material and electrode for sterilization. Driven by L–S TENG, the electrodes exhibited an excellent sterilization rate against four microorganisms including Escherichia coli, Aspergillus niger, Candida albicans, and Klebsiella pneumoniae, which from slime in the papermaking industry. This study could provide a basic research theory for liquid energy harvesting in the papermaking industry, and also provide a new strategy for pulp sterilization.

Graphical abstract