Effect of oxygen evolution catalysts on hematite nanorods for solar water oxidation

Photochemical deposition of Co and Ni based oxygen evolution catalysts on hematite nanorods cathodically shifted the onset potential of photocurrent near to the flat band potential of hematite. A 9.5 fold enhancement in the photocurrent density at 0.86 V vs. RHE compared to the parent hematite photoanode was observed with the Ni-Bi/Fe(2)O(3) photoanode.     

Revealing the unexpected promotion effect of EuOx on Pt/CeO2 catalysts for catalytic combustion of toluene

Pt/Eu₂O₃-CeO₂ materials with different Eu concentrations were prepared and applied to toluene destruction, and the remarkable promotion impact of EuO_x on Pt/CeO₂ can be observed. The characterization results reveal that the presence of EuO_x significantly enhances the redox property, lattice O concentration, and Ce³⁺ ratio of the Pt/CeO₂ material, which facilitates the dispersion and activity of Pt active sites and thus accelerates the decomposition process of toluene. Among all catalysts, a sample with an Eu content of 2.5 at.% (Pt/EC-2.5) possesses the best catalytic activity with 0.09 vol% of toluene completely destructed at 200 °C under a relatively high GHSV of 50000 h^?1. The possible reaction pathway and mechanism of toluene combustion over Pt/Eu₂O₃-CeO₂ samples are presented according to in-situ DRIFTS, which confirms that the toluene oxidation process obeys the Mars-van Krevelen mechanism with aldehydes and ketones as primary organic intermediates.     

High-speed gradient parallel liquid chromatography/tandem mass spectrometry with fully automated sample preparation for bioanalysis: 30 seconds per sample from plasma

In this work, a high-throughput and high-performance bioanalytical system is described that is capable of extracting and analyzing 1152 plasma samples within 10 hours. A Zymark track robot system interfaced with a Tecan Genesis liquid handler was used for simultaneous solid-phase extraction of four 96-well plates in a fully automated fashion. The extracted plasma samples were injected onto four parallel monolithic columns for separation via a four-injector autosampler. The use of monolithic columns allowed for fast and well-resolved separations at a considerably higher flow rate without generating significant column backpressure. This resulted in a total chromatographic run cycle time of 2 min on each 4.6 x 100 mm column using gradient elution. The effluent from the four columns was directed to a triple quadrupole mass spectrometer equipped with an indexed four-probe electrospray ionization source (Micromass MUX interface). Hence, sample extraction, separation, and detection were all performed in a four-channel parallel format that resulted in an overall throughput of about 30 s per sample from plasma. The performance of this system was evaluated by extracting and by analyzing twelve 96-well plates (1152) of human plasma samples spiked with oxazepam at different concentrations. The relative standard deviation (RSD) of analyte sensitivity (slope of calibration curve) across the four channels and across the 12 plates was 5.2 and 6.8%, respectively. An average extraction recovery of 77.6% with a RSD of 7.7% and an average matrix effect of 0.95 with a RSD of 5.2% were achieved using these generic extraction and separation conditions. The good separation efficiency provided by this system allowed for rapid method development of an assay quantifying the drug candidate and its close structural analog metabolite. The method was cross-validated with a conventional liquid chromatography/tandem mass spectrometry (LC/MS/MS) assay.     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.     

A Highly Oxidizing and Isolable Oxoruthenium(V) Complex [RuV(N4O)(O)]2+: Electronic Structure,Redox Properties,and Oxidation Reactions Investigated by DFT Calculations

The electronic structure and redox properties of the highly oxidizing, isolable Ru^V?O complex [Ru^V(N₄O)(O)]²⁺, its oxidation reactions with saturated alkanes (cyclohexane and methane) and inorganic substrates (hydrochloric acid and water), and its intermolecular coupling reaction have been examined by DFT calculations. The oxidation reactions with cyclohexane and methane proceed through hydrogen atom transfer in a transition state with a calculated free energy barrier of 10.8 and 23.8 kcal mol^?1, respectively. The overall free energy activation barrier (ΔG^≠=25.5 kcal mol^?1) of oxidation of hydrochloric acid can be decomposed into two parts: the formation of [Ru^III(N₄O)(HOCl)]²⁺ (ΔG=15.0 kcal mol^?1) and the substitution of HOCl by a water molecule (ΔG^≠=10.5 kcal mol^?1). For water oxidation, nucleophilic attack on Ru^V?O by water, leading to O? O bond formation, has a free energy barrier of 24.0 kcal mol^?1, the major component of which comes from the cleavage of the H? OH bond of water. Intermolecular self‐coupling of two molecules of [Ru^V(N₄O)(O)]²⁺ leads to the [(N₄O)Ru^IV? O₂? Ru^III(N₄O)]⁴⁺ complex with a calculated free energy barrier of 12.0 kcal mol^?1.     

Palladium complexes with ethylene-bridged bis(N-heterocyclic carbene) for C-C coupling reactions

A series of new ethylene-bridged bis(imidazolium) halides with various N-substitutions were synthesized. Complexation of these imidazolium halides with Pd(OAc)₂ produced new Pd(II) ethylene-bridged bis(carbene) complexes. Crystallographic analyses of some of the new imidazolium salts and Pd(II) complexes were determined. Applications of these seven-member palladacycles in Suzuki and Heck coupling reactions produced comparable catalytic activities to those of six-member analogs.     

β-Octafluorinated tetrakis(ethoxycarbonyl)porphyrin

Tetrakis(alloxycarbonyl)porphyrin and its β-octafluoro-substituted derivatives were synthesized via Lindsey method and transformed to their zinc complexes.Single crystal X-ray structures of corresponding Zn(Ⅱ) porphyrins revealed that β-octafluorination will give more compactness of porphyrin moieties in the crystal structure owing to the hydrogen bonding interactions involving β-fluorine atoms.An unusual six-coordinated Zn(Ⅱ) was found via intramolecular coordination of oxygen atom of meso-substituents with central Zn(Ⅱ).     

多金属氧簇与倍半硅氧烷簇构筑的哑铃形杂化分子Langmuir膜和Langmuir-Blodgett膜

以两个形状杂化分子(Shape Hybrid Molecules)为目标分子, 研究了它们在气液界面上形成Langmuir膜的过程和Langmuir-Blodgett (LB)膜的聚集态结构. 杂化分子是由Wells-Dawson型磷钨氧簇(Polyoxometalates, POMs)和T₈型的倍半硅氧烷簇(Polyhedral Oligosilsesquioxane, POSS), 通过对苯二甲酸有机连接链(OL)用共价键构筑的具有杂化性质和哑铃形状的簇-簇杂化分子(POM-OL-POSS). 这两种杂化分子的差别在于POSS段中, 外围有机基团的尺寸不同. 在实验中, 采用Langmuir和LB膜技术, 了解POSS外围的七个取代基变化导致的分子尺寸变化对Langmuir膜形成过程和LB膜结构的影响. 采用Langmuir技术测定了表面压-平均分子面积(π-A)等温曲线和π-A循环等温曲线, 跟踪并研究了这两个杂化分子在水表面上形成Langmuir膜的过程. 实验结果表明, 两个杂化分子都表现出良好的两亲性, 从气相变化到固相的过程中, 杂化分子经历了从分散到集中的过程. 将这些膜转移到基片上, 得到单层的LB膜, 再利用原子力显微镜(AFM)和透射电子显微镜(TEM)研究了LB膜的表面形貌和聚集态结构. 由于POM段中含有钨和钒金属, 可以直接用TEM观察聚集态结构, 发现了在气-液和液-固相转变过程中, LB膜中杂化分子的聚集态结构都呈现涨落特征, 一种凝聚态物理中由相转变导致结构涨落的重要物理现象. 本研究获得的结果能够帮助我们以及这个领域的研究者们继续优化杂化分子的结构, 进一步构筑具有有序结构的膜和本体材料.     

Headgroup effect on silane structures at buried polymer/silane and polymer/polymer interfaces and their relations to adhesion

Sum frequency generation (SFG) vibrational spectroscopy was used to study the effect of silane headgroups on the molecular interactions that occur between poly(ethylene terephthalate) (PET) and various epoxy silanes at the PET/silane and PET/silicone interfaces. Three different silanes were investigated: (3-glycidoxypropyl) trimethoxysilane (γ-GPS), (3-glycidoxypropyl) methyl-dimethoxysilane (γ-GPMS), and (3-glycidoxypropyl) dimethyl-methoxysilane (γ-GPDMS). These silanes share the same backbone and epoxy end group but have different headgroups. SFG was used to examine the interfaces between PET and each of these silanes, as well as silanes mixed with methylvinylsiloxanol (MVS). We also examined the interfaces between PET and uncured or cured silicone with silanes or silane-MVS mixtures. Silanes with different headgroups were found to exhibit a variety of methoxy group interfacial segregation and ordering behaviors at various interfaces. The effect of MVS was also dependent upon silane headgroup choice, and the interfacial molecular structures of silane methoxy headgroups were found to differ at PET/silane and PET/silicone interfaces. Epoxy silanes have been widely used as adhesion promoters for polymer adhesives; therefore, the molecular structures probed using SFG were correlated to adhesion testing results to understand the molecular mechanisms of silicone-polymer adhesion. Our results demonstrated that silane methoxy headgroups play important roles in adhesion at the PET/silicone interfaces. The presence of MVS can change interfacial methoxy segregation and ordering, leading to different adhesion strengths.     

Application of ionic liquid halide nucleophilicity for the cleavage of ethers: a green protocol for the regeneration of phenols from ethers

We have used the high nucleophilicity of bromide ion in the form of the ionic liquid, 1-n-butyl-3-methylimidazolium bromide ([bmim][Br]), for the nucleophilic displacement of an alkyl group to regenerate a phenol from the corresponding aryl alkyl ether. Using 2-methoxynaphthalene (1) as a model compound, we found that the combination of ionic liquid [bmim][Br] and p-toluenesulfonic acid with warming effected demethylation in 14 h, affording the desired product 2-naphthol (2) in good yield (97%). Various other protic acids (MsOH, hydrochloric acid (35%), dilute sulfuric acid (50%)) could be used as a proton source in this demethylation reaction. Under the same conditions, cleavage of alkyl alkyl ether 2-(3-methoxypropyl)naphthalene yielded mixture of corresponding 2-(3-bromopropyl)naphthalene and 2-(3-hydroxypropyl)naphthalene. Dealkylation of various aryl alkyl ethers could also be achieved using significantly reduced (i.e., stoichiometric) amounts of concentrated hydrobromic acid (47%) in the ionic liquid. Both procedures afforded the desired products in moderate to good yield; however, cleavage of aryl alkyl cyclic ether, 2,3-dihydrobenzofuran, resulted in low yield of the desired product o-2-bromoethylphenol. The convenience of this method for ether cleavage and its effectiveness using only a moderate excess of hydrobromic acid make it attractive as a green chemical method.