Highly sensitive miniature photonic crystal fiber refractive index sensor based on mode field excitation

A highly sensitive miniature photonic crystal fiber refractive index sensor based on field mode excitation is presented. The sensor is fabricated by melting one end of a photonic crystal fiber into a rounded tip and splicing and collapsing the other end with a single-mode fiber. The rounded tip is able to induce cladding mode excitation, which resulted in an additional phase delay. Linear response of 262.28 nm/refractive index unit in the refractive index range of 1.337 to 1.395 is obtained for the physical length of a 953 μm sensor. The sensor is also shown to be insensitive to environmental temperature.     

Cold nuclear matter effects on J/ψ yields as a function of rapidity and nuclear geometry in d+A collisions at sqrt[s(NN)]=200 GeV

We present measurements of J/ψ yields in d+Au collisions at sqrt[s(NN)]=200 GeV recorded by the PHENIX experiment and compare them with yields in p+p collisions at the same energy per nucleon-nucleon collision. The measurements cover a large kinematic range in J/ψ rapidity (-2.2相似文献   

Speckle suppression and contrast enhancement in reconstruction of freehand 3D ultrasound images using an adaptive distance-weighted method

In three-dimensional (3D) freehand ultrasound (US), reconstructing a set of B-scans into a regular voxel array is the key procedure for consequent visualization and analysis. This paper presents a new adaptive interpolation algorithm for computing the voxel array to suppress speckle noises and enhance contrast. The local statistics of homogeneous regions including mean and variance were measured and the ratio of variance to mean was used as homogeneity criteria. For the computation of each voxel, the interpolation method was adaptively determined with respect to its local statistics. If the neighbouring pixels of a voxel satisfied the homogeneity criterion, its value was computed with an arithmetic mean filter. Otherwise, the voxel was probably locating in an inhomogeneous region and an adaptive distance-weighted (ADW) interpolation method was employed to compute its value. A resolution phantom and a subject’s forearm were reconstructed using the proposed algorithm and two other well-known methods - conventional distance-weighted (DW) and voxel nearest neighbourhood (VNN) interpolations. The comparison results demonstrated that the adaptive interpolation algorithm was able to suppress speckles, preserve edges and enhance contrast effectively for the volume reconstruction.     

Deterministic secure quantum communication against collective-dephasing noise by using EPR pairs and auxiliary photons

A deterministic secure quantum communication against collective-dephasing noise is proposed. Alice constructs two sets of three-photon bases with EPR (Einstein-Podolsky-Rosen) pairs in the state |Ψ⁺〉 or |Ψ^-〉 and auxiliary single photons in the state |H〉. And then she sends them to Bob. Bob can get the secret message by his single-photon measurement outcomes and two public message strings from Alice if the quantum channel is secure. The scheme does not need photon storing technique and only single-photon measurement is necessary.     

Stacking chirped pulse optical parametric amplification

Stacking chirped pulse optical parametric amplification based on a home-built Yb³⁺-doped mode-locked fiber laser and an all-fiber pulse stacker has been demonstrated. Energic 11 mJ shaped pulses with pulse duration of 2.3 ns and a net total gain of higher than 1.1 × 10⁷ at fluctuation less than 2% rms are achieved by optical parametric amplification pumped by a Q-switched Nd:YAG frequency-doubled laser, which provides a simple and efficient amplification scheme for temporally shaped pulses by stacking chirped pulse.     

Optimization and Finite Element Analysis of the Temperature Field in a Nitride MOCVD Reactor by Induction Heating

A susceptor structure with a ring channel for a vertical metalorganic chemical vapor deposition reactor by induction heating is proposed. Thus the directions of heat conduction are changed by the channel, and the channel makes the heat in the susceptor redistribute. The pattern of heat transfer in this susceptor is also analyzed. In addition, the location and size of the channel in the susceptor are optimized using the finite element method. A comparison between the optimized and the conventional susceptor shows that the optimized susceptor not only enhances the heating efficiency but also the uniformity of temperature distribution in the wafer, which contributes to improving the quality of the film growth.     

掺铒光纤激光器反相位混沌同步及其编码

针对单模双环掺铒光纤激光器具有光耦合相互作用的非线性动力学特点,应用“交叉注入反相位双环对两环主动—被动”混沌同步方法,数值模拟实现了两组相互独立的单模单环掺铒光纤激光器激光分别和单模双环掺铒光纤激光器对应环激光混沌同步;提出并数值模拟了具有调制频率1kHz和15kHz的正弦信号的双环—两环的两路混沌隐藏编码保密通信系统,它们解码质量好,保密性能强,可以很好地应用在混沌多路保密通信中。     

用反射法自动测量大尺寸样品的折射率分布

针对大尺寸样品的折射率分布测量,引入自动扫描装置和适时数据处理系统,研究出一种高灵敏度的智能化反射法折射率分布测量仪,可进行快速、自动、准确的折射率分布测量.经理论分析和实验研究提出了一套合理的实验数据处理方法.并具体介绍和详尽分析了实验装置,讨论了有关理论和实验误差,给出了消除各种误差的有效方法,最终得出较为理想的实验结果.     

The reliability of measurements on electron energy distribution function in silane rf glow discharges

Electron energy distribution function (EEDF) is a key parameter of plasmas, which is directly proportional to the second derivative of the probe I-V characteristics. Because of an amplifying effect of unavoidable noises in the experimental probe I-V curves during the derivation process, the experimental I-V curves should be smoothed before performing the numerical derivation. This paper investigates the effect of adjustable factors used in the smoothing process on the deduced second derivative of the I-V curves, and an optimum group of the adjustable factors is selected to make the rms deviation of the smoothed I-V curves from the measured curves less than 1%. A simple differentiation circuit is designed and used to measure the EEDF parameter straightforwardly. It is the first time, so far as we know, to measure the EEDF parameters simultaneously by means of both numerical and circuit derivative methods under the same discharge conditions and on the same discharge equipment. The deviation between two groups of mean electron energy E and electron density n_e obtained by the above different methods is within about 7%. This apparently improves the reliability of the measurements of the EEDF parameters.     

Low-Loss Fiber De-Multiplexers

Reported are fiber de-multiplexers based on side-polished fibers with a long interaction length and intra-core fiberBragg gratings. In conjunction with the silicon processing technologies, we demonstrate fiber filters and advantages ofour approaches are addressed.