Olefin polymerization with Me4Cp–Amido complexes with electron‐withdrawing groups

A series of Me₄Cp–amido complexes {[η⁵:η¹‐(Me₄C₅)SiMe₂NR]TiCl₂; R = t‐Bu, 1 ; C₆H₅, 2 ; C₆F₅, 3 ; SO₂Ph, 4 ; or SO₂Me, 5 } were prepared and investigated for olefin polymerization in the presence of methylaluminoxane (MAO). X‐ray crystallography of complexes 3 and 4 revealed very long Ti N bonds relative to the bonds of 1 . These complexes were employed for ethylene–styrene copolymerizations, styrene homopolymerizations, and propylene homopolymerizations in the presence of MAO. The productivities of the catalysts derived from 3 – 5 were much lower than the productivity of the catalyst derived from 1 for the propylene polymerizations and ethylene–styrene copolymerizations, whereas the styrene polymerization activities were much higher for the catalysts derived from 3 – 5 than for the catalyst derived from 1 . The polymerization behavior of the catalysts derived from the metallocenes 3 – 5 were more reminiscent of monocyclopentadienyl titanocene Cp′TiX₃/MAO catalysts than of CpATiX₂/MAO catalysts such as 1 containing alkylamido ligands. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4649–4660, 2000     

Simultaneous quantification of centchroman and its 7-demethylated metabolite in rat dried blood spot samples using LC-MS/MS

An approach has been developed for the quantitative determination of concentrations of centchroman ( I), a nonsteroidal once‐a‐week oral contraceptive, and its major metabolite (7‐desmethyl centchroman, II) using dried blood spots (DBS) on paper, rather than conventional plasma samples. The assay employed simple solvent extraction of the DBS sample circle (6 mm) requiring small blood volumes (30 μL) followed by reversed‐phase HPLC separation, combined with multiple reaction monitoring mass spectrometric detection. The calibration plot in matrix using d ‐trans‐hydroxy chroman as internal standard (IS) was linear (r² = 0.998) over ranges of 1.5–240 and 4.5–720 ng/mL for I and II, respectively. The recoveries of both I and II were always >60% with quantification limits (signal‐to‐noise ratio = 10) of 1.5 and 4.5 ng/mL for I and II, respectively. The intra‐day and inter‐day precision (%RSD) and accuracy (%bias) variations in blood spots for both I and II were better than 13%. Moreover, both I and II were stable in DBS for at least 3 months when stored at room temperature. The developed method was successfully applied to the pharmacokinetic interaction study after oral administration of centchroman with and without co‐administration of carbamazepine in female Sprague–Dawley rats using serial sampling and results were comparable with the plasma concentrations reported earlier. Copyright © 2011 John Wiley & Sons, Ltd.     

Structure and dynamics of solutions of a polystyrene–polybutadiene pentablock copolymer in a styrene‐selective solvent

We have examined solutions of a polystyrene–polybutadiene pentablock copolymer in 1,4‐dioxane, a slightly selective solvent for polystyrene and a θ solvent for polybutadiene, with static light scattering (SLS), dynamic light scattering (DLS), and small‐angle neutron scattering (SANS). The SANS data have been analyzed with the Percus–Yevick model to represent the scattering from interacting cores, approximated as hard spheres, and with a Lorentzian function to represent the scattering from unassociated and associated polymer chains. The SANS data at 25 °C clearly reveal interacting domains, approximately 6 nm in radius, formed by the association of the insoluble polybutadiene block in the 20% sample. The 4% sample does not show such domains, whereas the 7% sample represents an intermediate situation, with both unassociated polymer and associated polymer. At higher temperatures, the domains dissolve. The DLS data for samples with concentrations of 2–22% show two diffusive modes: a fast mode corresponding to the cooperative dynamics of concentration fluctuations and a slow mode corresponding to the diffusion of clusters. The large length‐scale heterogeneities, indicated by the strong angular dependence of SLS, implies that the small microdomains of about 10–15 polybutadiene blocks are bridged by the polystyrene chains, forming large aggregates with randomly distributed crosslinks on length scales much larger than the domain size. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2807–2816, 2002     

Regulation of vincamine biosynthesis and associated growth promoting effects through abiotic elicitation,cyclooxygenase inhibition,and precursor feeding of bioreactor grown Vinca minor hairy roots

Hydroxylase/acetyltransferase elicitors and cyclooxygenase inhibitor along with various precursors from primary shikimate and secoiridoid pools have been fortified to vincamine less hairy root clone of Vinca minor to determine the regulatory factors associated with vincamine biosynthesis. Growth kinetic studies revealed that acetyltransferase elicitor acetic anhydride and terpenoid precursor loganin significantly reduce the growth either supplemented alone or in combination (GI?=?140.6?±?18.5 to 246.7?±?24.3), while shikimate and tryptophan trigger biomass accumulation (GI?=?440.2?±?31.5 to 540.5?±?40.3). Loganin also downregulates total alkaloid biosynthesis. Maximum flux towards vincamine production (0.017?±?0.001 % dry wt.) was obtained when 20-day-old hairy roots were fortified with secologanin (10 mg/l) along with tryptophan (100 mg/l), naproxen (8.4 mg/l), hydrogen peroxide (20 μg/l), and acetic anhydride (32.4 mg/l). This was supported by RT PCR (qPCR) analysis where 2- and 3-fold increase in tryptophan decarboxylase (TDC; RQ?=?2.0?±?0.09) and strictosidine synthase (STR; RQ?=?3.3?±?0.36) activity, respectively, was recorded. The analysis of variance (ANOVA) for growth kinetics, total alkaloid content, and gene expression studies favored highly significant data (P?<?0.05–0.01). Above treated hairy roots were also up-scaled in a 5-l stirred-tank bioreactor where a 40-day cycle yielded 8-fold increase in fresh root mass.     

Sodium alginate/HPMC/liquid paraffin emulsified (o/w) gel beads,by factorial design approach; and in vitro analysis

The present study involved development of a novel sodium alginate (SA)/HPMC/light liquid paraffin emulsified (o/w) gel beads containing Diclofenac sodium (DS) as an active pharmaceutical ingredient and its site specific delivery by using hard gelatin capsule fabricated by enteric coated Eudragit L-100 polymer. Emulsified gel beads were formulated by 3-level factorial design, ionic gelatin method. The obtained beads were characterized by Fourier transform infrared, X-ray diffraction and Field emission scanning electron microscope analysis. The variables such as SA (X₁), HPMC (X₂), were optimized for drug loading and in vitro drug release with the help of response surface methodology (RSM). The RSM analysis predicted that SA was significant for both drug loading (p = 0.0005) and drug release (p = 0.0041). HPMC was only significant for drug release (p = 0.0154). The cross-product contribution (2FI) and quadratic model were found to be adequate and statistically accurate with correlation value (R²) of 0.9054 and 0.9450 to predict the drug loading and drug release respectively. An increase in concentration of HPMC and SA decreases the drug loading as well as the drug release. The obtained optimum values of drug loading and DS released were 7.43 % and 85.54 % respectively, which were well in agreement with the predicted value by RSM.     

Syntheses of aromatic aldehydes by laccase without the help of mediators

This communication reports the selective bioconversions of substituted toluenes to substituted benzaldehydes without the help of any mediators by purified laccase of indigenous fungal strain Fomes durissimus microbial type culture collection (MTCC)-1173. Molecular mass of laccase purified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis was found to be 74.86 kDa (～75 kDa). By using this purified laccase, selective bioconversions of 3-nitrotoluene to 3-nitrobenzaldehyde, 2-fluorotoluene to 2-fluorobenzaldehyde, 4-fluorotoluene to 4-fluorobenzaldehyde, 2-chlorotoluene to 2-chlorobenzaldehyde and 4-chlorotoluene to 4-chlorobenzaldehyde have been done without the help of mediator molecules within 1–2 hrs at room temperature and pressure with high yields (>90%). All the above bioconversions are good examples of green chemistry.     

Recent applications of sample preparation techniques in food analysis

Even with the emergence of advanced techniques of separation and identification, it is rarely possible to analyse food without manipulation. The traditional techniques for sample preparation are time consuming and require large amount of reagents, which are expensive, generate considerable waste, contaminate the sample and can enrich it for analytes. The more analytical techniques have become highly developed, the more has sample clean-up become important in order to fully take advantage of them. Due to the multiplicity of food matrices, it is not possible to use one sample preparation technique, so many methods have been proposed for meeting all the requirements. The newest variations of wet digestion, solvent and sorbent extraction and membrane separation are summarised and their most recent applications to food analysis are provided.     

Some neutral three-coordinate complexes of mercury(II) halides and pseudohalides with N-methylnicotinamide

Coordination compounds of mercury(II) chloride, bromide, cyanide and thiocyanate with N-methylnicotinamide, a potentially bidentate ligand, have been prepared. The complexesisolated have 1∶1 (metal:ligand)stoichiometry. Molecular weight measurements in molten camphor indicate that the mercury (II) chloride and bromide complexes are monomeric. Based on conductance values, molecular weight determinations and infrared spectral data, it is inferred that in the solid state in all these complexes the metal ion has a coordination number three and is bonded to the N-methylnicotinamide via its pyridine ring nitrogen, and is terminally bonded to the halogen/pseudohalogens.     

Poly(3,4‐ethylenedioxythiophene) (PEDOT)‐Coated MWCNTs Tethered to Conducting Substrates: Facile Electrochemistry and Enhanced Coloring Efficiency

Composite films of poly(3,4‐ethylenedioxythiophene) (PEDOT)‐coated over functionalized multiwalled coiled and linear carbon nanotubes (CNTs) have been fabricated by a simple oxidative electropolymerization route. The nanotubular morphology of the polymer–CNT composite is responsible for the lower charge transfer impedance, lower internal resistance, and superior capacitive response in comparison to that shown by the control PEDOT film doped by trifluoromethanesulfonate ions. This facile electrochemistry exhibited by the PEDOT–CNT composite film ensues in a remarkably high coloration efficiency of 367 cm² · C⁻¹ at 550 nm, hitherto unrealized for PEDOT; thus demonstrating the huge potential the PEDOT–CNT composite film has as cathode for the entire spectrum of electrochromic devices.