Solvent- and Substrate-Induced Chiroptical Inversion in Amphiphilic,Biocompatible Glycoconjugate Supramolecules: Shape-Persistent Gelation,Self-Healing,and Antibacterial Activity

We have shown solvent- and substrate-dependent chiral inversion of a few glycoconjugate supramolecules. (Z)-F-Gluco, in which d -glucosamine has been attached chemically to Cbz-protected l -phenylalanine at the C terminus, forms a self-healing hydrogel through intertwining of the nanofibers wherein the gelators undergo lamellar packing in the β-sheet secondary structures with a single chiral handedness. Dihybrid (Z)-F-gluco nanocomposite gel was prepared by in-situ formation of silver nanoparticles AgNPs in the gel; this enhances the mechanical properties of the composite gel through physical crosslinking without altering the packing pattern. In contrast, (Z)-L-gluco bearing an l -leucine moiety does not form a hydrogel but an organogel. Interestingly, the chiral handedness of the aggregates of (Z)-L-gluco can be reversed by choosing suitable solvents. In addition to self-healing behavior, (Z)-L-gluco gel revealed shape persistency. Further, (Z)-F-gluco hydrogel is benign, nontoxic, non-immunogenic, and non-allergenic in animal cells. AgNP-loaded (Z)-F-gluco hydrogel showed antibacterial activity against both Gram-positive and Gram-negative bacteria.     

Boron-Containing Lipids and Liposomes: New Conjugates of Cholesterol with Polyhedral Boron Hydrides

A series of boron-containing lipids were prepared by reactions of cyclic oxonium derivatives of polyhedron boranes and metallacarboranes (closo-dodecaborate anion, cobalt and iron bis(dicarbollides)) with amine and carboxylic acids which are derived from cholesterol. Stable liposomal formulations, on the basis of synthesized boron-containing lipids, hydrogenated soybean l -α-phosphatidylcholine and (HSPC) 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-PEG) as excipients, were prepared and then characterized by dynamic light scattering (DLS) that revealed the formation of particles to be smaller than 200 nm in diameter. The resulting liposomal formulations showed moderate to excellent loading and entrapment efficiency, thus justifying the design of the compounds to fit in the lipid bilayer and ensuring ease of in vivo use for future application. The liposomal formulations based on cobalt and iron bis(dicarbollide)-based lipids were found to be nontoxic against both human breast normal epithelial cells MCF-10A and human breast cancer cells MCF-7.     

Strategies to cure numerical shock instability in the HLLEM Riemann solver

The HLLEM scheme is a popular contact and shear preserving approximate Riemann solver that is known to be plagued by various forms of numerical shock instability. In this paper, we clarify that the shock instability exhibited by this scheme is primarily triggered by the spurious activation of the antidiffusive terms present in the first and third Riemann flux components on the transverse interfaces adjoining the shock front due to numerical perturbations. These erroneously activated terms are shown to counteract the favorable damping mechanism provided by its inherent HLL-type diffusive terms, causing an unphysical variation of the conserved quantity ρu both along and across the numerical shock. To prevent this, two distinct strategies are proposed termed as S elective W ave M odification and A nti D iffusion C ontrol. The former focuses on enhancing the quantity of the favorable HLL-type dissipation available on these critical flux components by carefully increasing the magnitudes of certain nonlinear wave speed estimates, while the latter focuses on directly controlling the magnitude of these critical antidiffusive terms. A linear perturbation analysis is performed to gauge the effectiveness of these cures and to estimate a von Neumann–type stability bounds on the CFL number associated with their use. Results from a variety of classic shock instability test cases show that the proposed strategies are able to provide excellent shock stable solutions even on grids that are highly elongated across the shock front without compromising the accuracy on inviscid contact or shear dominated viscous flows.     

Synthetic directions towards capsular polysaccharide of Streptococcus pneumoniae serotype 18C

An efficient synthetic strategy has been developed for the synthesis of the tri, tetrasaccharide block and pentasaccharide corresponding to the capsular polysaccharide of Streptococcus pneumonia serotype 18C as their 2-aminoethyl glycosides. A one-pot glycosylation-deprotection, sequential glycosylations strategy has been adopted for the construction of the fragments and pentasaccharide derivative, which were then transformed into target compound after a series of functional group transformations. The synthetic method relies on the use of p-methoxybenzyl ether as an in situ-removable protecting group to reduce the number of reaction steps significantly. Here H₂SO₄-silica has been used successfully as a promoter for all glycosylation reaction. In addition, the synthetic target also contained a free amino group at its reducing end, facilitating its conjugation with other molecules for various biological studies and applications.     

Pair correlation function and freezing transitions in a two-dimensional system of model ultrasoft colloids

Density functional theory (DFT) of freezing has been used to investigate the freezing transitions in a system of colloidal particles confined to a two-dimensional plane. The particles interact via a model Hertzian type potential of varying softness. The pair-correlation functions (PCFs) needed as input structural information in DFT are calculated by solving hypernetted chain (HNC) integral equation theory. The PCFs thus obtained have been compared with those obtained through experiment and simulations and are found to be in good qualitative agreement. We found that the PCFs are sensitive to the softness of the potential: showing splitting of pair-correlation peak in the harder case and anomalous non-monotonic density dependence in the softer case. Using the common tangent construction method, we have also proposed the fluid-triangular solid phase diagrams in the temperature-density plane. We found that the phase diagram exhibit solid-fluid coexistence region whose thickness decreases with the increasing temperature as well as with increasing softness of the potential. In the temperature and density range of our calculation, DFT fails to produce any reentrance in the phase diagram.     

Synthesis and Characterization of New Phosphorus Containing Sulfonated Polytriazoles for Proton Exchange Membrane Application

Sulfonated polytriazoles have drawn a great attention as high performance polymers and their good film forming ability. In the present study, a phosphorus containing new diazide monomer namely, bis-[4-(4′-aminophenoxy)phenyl]phenylphosphine was synthesized and accordingly, a series of phosphorus containing sulfonated polytriazoles (PTPBSH-XX) was synthesized by reacting equimolar amount of this diazide monomer (PAZ) in combination with another sulfonated diazide monomer (DSAZ) and a terminal bis-alkyne (BPALK) by the Cu (I) catalyzed azide–alkyne click polymerization. The polymers were characterized by nuclear magnetic resonance (¹H, ¹³C, ³¹P NMR) and Fourier transform infrared spectroscopic techniques. The sulfonic acid content of the copolymers also determined from the different integral values obtained from the ¹H NMR signals. The small-angle X-ray scattering results unfolded the well-separated dispersion of the hydrophilic and hydrophobic domains of the polymers. As a whole, the copolymer membranes displayed sufficient thermal, mechanical, and oxidative stabilities high with high proton conductivity and low water uptake that are essential for proton exchange membrane applications. The copolymers exhibited oxidative stability in the range of 15–24 h and had proton conductivity values were found as high as 38–110 mS cm⁻¹ at 80 °C in completely hydrated condition. Among the all copolytriazoles, PTPBSH-90 (BPALK:DSAZ:PAZ = 100:90:10) having IEC_W = 2.44 mequiv g⁻¹, showed proton conductivity as high as 119 mS cm⁻¹ at 90 °C with an activation energy of 10.40 kJ mol⁻¹ for the proton conduction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 263–279     

Recent advances in Garratt-Braverman cyclization: Mechanistic and synthetic explorations

Garratt-Braverman cyclization has emerged as one of the simplest synthetic tool to construct two consecutive CC bonds leading to the formation of various important structural scaffolds having significance in the field of therapeutics and material science. The strategic design of suitable precursor for this cycloaromatization reaction involves the deep understanding of reaction pathways involving diradicals and ions. On the other hand, the reaction offers an unprecedented mechanistic paradox for the chemists to solve. This report aims at outlining the recent mechanistic and synthetic developments with special emphasis on the research outcomes from our laboratory.     

Novel glitazones as PPARγ agonists: molecular design,synthesis, glucose uptake activity and 3D QSAR studies

Background

An alarming requirement for finding newer antidiabetic glitazones as agonists to PPARγ are on its utmost need from past few years as the side effects associated with the available drug therapy is dreadful. In this context, herein, we have made an attempt to develop some novel glitazones as PPARγ agonists, by rational and computer aided drug design approach by implementing the principles of bioisosterism. The designed glitazones are scored for similarity with the developed 3D pharmacophore model and subjected for docking studies against PPARγ proteins. Synthesized by adopting appropriate synthetic methodology and evaluated for in vitro cytotoxicity and glucose uptake assay. Illustrations about the molecular design of glitazones, synthesis, analysis, glucose uptake activity and SAR via 3D QSAR studies are reported.

Results

The computationally designed and synthesized ligands such as 2-(4-((substituted phenylimino)methyl)phenoxy)acetic acid derivatives were analysed by IR, ¹H-NMR, ¹³C-NMR and MS-spectral techniques. The synthesized compounds were evaluated for their in vitro cytotoxicity and glucose uptake assay on 3T3-L1 and L6 cells. Further the activity data was used to develop 3D QSAR model to establish structure activity relationships for glucose uptake activity via CoMSIA studies.

Conclusion

The results of pharmacophore, molecular docking study and in vitro evaluation of synthesized compounds were found to be in good correlation. Specifically, CPD03, 07, 08, 18, 19, 21 and 24 are the candidate glitazones exhibited significant glucose uptake activity. 3D-QSAR model revealed the scope for possible further modifications as part of optimisation to find potent anti-diabetic agents.

Open image in new window

     

Synthesis, spectroscopy, and X-ray structures of fac-(CO)3(dppe)MnSC(S)H, fac-(CO)3(dppe)ReSC(S)H, fac-(CO)3(dppp)ReSC(S)H, and fac-(CO)3(dppb)ReSC(S)H

The monodentate dithioformato complexes, fac-(CO)₃(dppe)MnSC(S)H (1), fac- (CO)₃(dppe)ReSC(S)H (2), fac-(CO)₃(dppp)ReSC(S)H (3), and fac-(CO)₃ (dppb)ReSC(S)H (4), where dppe is 1,2-bis(diphenylphosphino)ethane, dppp is 1,3-bis(diphenylphosphino)propane, and dppb is 1,4-bis(diphenylphosphino)butane, were synthesized from the treatment of the corresponding hydrides, fac-(CO)₃ (P-P)MSC(S)H with CS₂. Compounds 1–4 crystallize in the monoclinic crystal system: for 1, space group = P2₁/c, a = 15.3139(3) Å, b = 9.7297(4) Å, c = 19.0991(6) Å, = 105.928(1), V = 2736.5 ų, Z = 4; for 2, space group = P2₁/c, a = 15.6395(8) Å, b = 9.8182(5) Å, c = 19.4153(11) Å, = 106.741(1), V = 2854.9(3) ų, Z = 4; for 3, space group = P2₁/n, a = 11.3570(10) Å, b = 19.465(2) Å, c = 15.5702(14) Å, = 104.776(2), V = 3328.3(5) ų, Z = 4; and for 4, space group = C2/c, a = 32.078(2) Å, b = 10.4741(6) Å, c = 19.0608(9) Å, = 94.315(2), V = 6386.1(6) ų, Z = 8.