Application of solid phase microextraction in the determination of paralytic shellfish poisoning toxins

A SPME-HPLC-post-column fluorescent derivatization method for the direct determination of saxitoxin (STX), the most potent paralytic shellfish poisoning (PSP) toxin, in water has been developed. Commercially available SPME devices with 50 microm Carbowax templated resin (CW/TPR) coating was found to be able to pre-concentrate STX from aqueous media. A special pre-conditioning treatment of soaking the SPME coating in 0.1 M NaOH solution significantly improved the extraction efficiency. The optimal pH for the SPME process is 8.1 and the equilibration time is 40 min. The partition coefficient, K, of the distribution of STX between the SPME coating and the aqueous media was measured to be 2.99 +/- 0.04 x 10(3). Extracted toxin on the SPME stationary phase was difficult to be desorbed by the HPLC mobile phase under dynamic desorption mode. A static ion-pairing desorption technique using a desorption solvent mixture of 20 mM sodium 1-heptanesulfonate in 30% aqueous acetonitrile acidified with 50 mM sulfuric acid was developed to overcome this problem. The method detection limit and repeatability achieved by this SPME-HPLC method were 0.11 ng ml(-1) and 3.7%, respectively, with a sample volume of just 5 ml of water. This analytical method is adequate for the monitoring of the PSP toxin in fresh/drinking waters. However, serious interference was observed when this technique was applied to saline water samples. This is probably due to competition of sodium ions with the cationic STX for absorption into the SPME stationary phase.     

Synthesis and Mesogenic Properties of Liquid Crystals Containing Terminal Cyclohexylmethanol,Cyclopentylmethanol, Cyclobutylmethanol and Cyclopropylmethanol Moiety

Four series of compounds 11?50 containing terminal alicyclic rings such as cyclohexylmethyl, cyclopentylmethyl, cyclobutylmethyl, and cyclopropylmethyl rings were synthesized and their liquid crystal behavior studied. The ring size and the length of flexible alkoxy chain influence the phase formation in different ways. While the smaller ring and the shorter alkoxy chain tend to favor the formation of the N phase, the larger ring and the longer alkoxy chain tend to favor the formation of the SmC phase. All the compounds except 11 and 21 exhibit SmA phases. The widest temperature range of the N, SmA, and SmC phases are found in the compounds 41 , 46 , and 20 , respectively, which are 75 °C for 41 , 115 °C for 46 , and 100 °C for 20 .     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

All-solid-state carbonate-selective electrode based on a molecular tweezer-type neutral carrier with solvent-soluble conducting polymer solid contact

Carbonate-selective membranes were prepared by incorporating a molecular tweezer-type carbonate-selective neutral carrier [N,N-dioctyl-3alpha,12alpha-bis(4-trifluoroacetylbenzyloxy)-5beta-cholan-24-amide] into a room temperature vulcanizing-type silicone rubber (3140 RTV-SR) matrix, and deposited on the planar-type electrodes (Pt containing Ag/AgCl electrodes formed on a ceramic plate) with and without an intermediary conducting polymer layer. Two types of solvent-soluble conducting polymers [poly(1-hexyl-3,4-dimethyl-2,5-pyrrolylene) or poly(3-octylthiophene-2,5-diyl)] have been examined as the solid contact material. Potentiometric properties of the resultant all-solid-state electrodes were evaluated in terms of their carbonate selectivity, response slope, potential stability and reproducibility. The sensitivity and carbonate selectivity of the SR membrane-based all-solid-state electrodes with conducting polymer solid contact were comparable to those of conventional electrodes. Experimental results also showed that the intermediary conducting polymer layer used in the all-solid-state electrodes greatly reduces the interference from dissolved oxygen.     

Comparative studies of various run buffers for chiral capillary electrophoresis using chiral crown ether as a chiral selector

In the capillary electrophoretic separation of primary amine enantiomers using (+)-(18-crown-6)-tetracarboxylic acid (18C6H4) as a chiral selector, the presence of run buffer constituents such as tris(hydroxymethyl)aminomethane (Tris) or Na+ competing with analytes for 18C6H4, diminishes the effectiveness of 18C6H4. In order to determine appropriate buffer systems for 18C6H4, various run buffer cationic components including Tris, 1,3-bis[tris(hydroxymethyl)methylamino]propane, bis(2-hydroxyethyl)iminotris(hydroxymethyl)methane, triethanolamine, tetramethylammonium, and Na+ were compared. Quantitative studies of the effects of the competitive constituents were carried out by measuring the electrophoretic mobilities of histidine as a function of the 18C6H4 concentration. We also derived a simple equation to estimate the optimal chiral selector concentration for a maximum mobility difference in the presence of a competitive inhibitor.     

Enhancement of phosphoprotein analysis using a fluorescent affinity tag and mass spectrometry

A fluorescent affinity tag (FAT) was synthesized and was utilized to selectively modify phosphorylated serine and threonine residues via beta-elimination and Michael addition chemistries in a 'one-step' reaction. This labeling technique was used for covalent modification of both phosphoproteins and phosphopeptides, allowing identification of these molecular species by fluorescence imaging after solution- or gel-based separation methods. In addition to the strong fluorescence of the rhodamine tag, a commercially available antibody can be used to enrich low-abundance post-labeled phosphopeptides present in complex mixtures. Application of this methodology to phosphorylation-site mapping has been evaluated for a phosphoprotein standard, bovine beta-casein. Initial results demonstrated low femtomole detection limits after fluorescence image analysis of FAT-labeled proteins or peptides.     

Analysis of urban dust (PM<Subscript>2</Subscript>/PM<Subscript>10-2</Subscript>) in Daejeon city by instrumental neutron activation analysis

Summary As part of an air pollution monitoring study, airborne particulate matter (PM₂/PM_10-2) samples were collected from 2000 to 2003 at two sampling sites in an urban region, Daejeon, the middle of Korea. Mass concentrations of both fine and coarse fractions and that of the black carbon in the fine particles were measured using the Gent stacked filter unit sampler and the smoke stain reflectometer, respectively. In the collected samples the concentrations of 24 elements were analyzed using instrumental neutron activation analysis. Monitored data were investigated for their temporal trends under different environmental conditions and their seasonal correlation patterns. Crustal enrichment factors were also estimated to establish the contribution between anthropogenic and crustal origin. Patterns for airborne particle matter (APM) and elemental concentrations, seasonal variation of some marker elements were investigated. The results can be applied for the investigation of further air pollution sources and for the evaluation of air quality.     

Airborne particulates (PM2.5/PM10) monitoring in Korea by instrumental neutron activation analysis

Instrumental neutron activation analysis was used for the analysis of 25 trace elements in airborne particulate matter (PM) for air pollution monitoring. For the collection of air samples, the Gent stacked filter unit low volume sampler and two types of Nuclepore polycarbonate filters were employed. Samples were collected at selected sampling dates in suburban and industrial regions of Daejon city in the Republic of Korea. Mass concentrations and black carbon of PM were measured, and enrichment factors were calculated. The results were used to describe the emission sources and their correlation patterns.