Synthesis and Cytotoxicity Evaluation of Metal‐Chelator‐Bearing Flavone,Carbazole, Dibenzofuran,Xanthone, and Anthraquinone

2‐(Aryloxymethyl)‐5‐benzyloxy‐1‐methyl‐1H‐pyridin‐4‐ones 8a – 8g , 2‐(aryloxymethyl)‐5‐hydroxy‐4H‐pyran‐4‐ones 9a – 9g , and 2‐(aryloxymethyl)‐5‐hydroxy‐1‐methyl‐1H‐pyridin‐4‐ones 10a – 10g were prepared from the known 5‐benzyloxy‐2‐(hydroxymethyl)pyran‐4‐one ( 3 ) in a good overall yield. These compounds were evaluated in vitro against a three‐cell lines panel consisting of MCF7 (breast), NCI‐H460 (lung), and SF‐268 (CNS), and the active compounds passed on for evaluation in the full panel of 60 human tumor cell lines derived from nine cancer cell types. The results indicated that 5‐hydroxy derivatives are more favorable than their corresponding 5‐benzyloxy precursors ( 10a – 10g vs. 8a – 8g ), and 1‐methyl‐1H‐pyridin‐4‐ones are more favorable than their corresponding pyran‐4(1H)‐ones ( 10a – 10g vs. 9a – 9g ). Among these three types of compounds, 2‐(aryloxymethyl)‐5‐hydroxy‐1‐methyl‐1H‐pyridin‐4‐ones 10a – 10g were the most cytotoxic; they inhibited the growth of almost all the cancer cells tested. On the contrary, compound 8a (a mean GI₅₀=27.8 μM ), 8b (38.5), 8d (11.0), and 8e (30.5) are especially active against the growth of SK‐MEL‐5 (a melanoma cancer cell) with a GI₅₀ of <0.01, 5.65, 0.55, and 0.03 μM , respectively (cf. Table 2).     

Potential-controlled switching of 2-(2'-thienyl)pyridine adsorbed on Au(111)

Switching between three different adsorbed states was achieved using potential control to separately induce electrochemical behaviour associated with changes in binding and orientation of the thiophene and pyridine moieties of 2-(2'-thienyl)pyridine adsorbed to Au(111) in neutral and basic solution.     

Seasonal variation and activity size distribution of <Superscript>7</Superscript>Be in ambient air

The seasonal variation of the ⁷Be activities in air and the size distribution of the ⁷Be aerosols were studied by using a continuous air sampler and a five stage cascade impactor. The mean monthly activity level of ⁷Be at the Korea Atomic Energy Research Institute (KAERI) site varied from 0.5 to 4.8 Bq·m⁻³ and revealed a seasonal variation, in which the ⁷Be activity levels were high in winter and low in summer. The mass size distribution showed a bi-modal distribution with a higher peak around 0.49 μm and a smaller peak between 3 μm and 7.2 μm. The activity median aerodynamic diameter (AMAD) decreased with increasing ambient ⁷Be concentrations. The mean residence times by using a mean growth rate of 0.004 μm·h⁻¹ were estimated to be 2.5–6.4 days. The AMAD has an increasing tendency with higher relative humidity. It seemed that the high humidity condition facilitated the growth of the aerosol, resulting in increased deposition rates of the aerosols and the low ⁷Be content in the surface air. The AMAD of the ⁷Be aerosols increased with an increasing temperature, but the temperature dependency of AMAD should be explained with geological and meteorological conditions.     

Bimetallic complexes with porphyrins containing a cyclometalated phenylpyridine group

Treatment of Ni(HP¹) (H₃P¹ = meso-5-[4′-(2″-pyridyl)phenyl]-10,15,20-triphenyporphyrin) with K₂[PdCl₄] in EtOH afforded [Pd{Ni(P¹)}]₂(μ-Cl)₂ that reacted with NaS₂CNEt₂ to give Pd(S₂CNEt₂)[Ni(P¹)]. Reaction of Ni(HP¹) with [Ir(H)₂(PPh₃)₂(Me₂CO)₂][BF₄] afforded Ir(H)Cl(PPh₃)₂[Ni(P¹)]. The crystal structures of Pd(S₂CNEt₂)[Ni(P¹)] and Ir(H)(Cl)(PPh₃)₂[Ni(P¹)] have been determined.     

Synthesis of pyrido[3,4-<Emphasis Type="Italic">d</Emphasis>]pyrimidines by condensation of ethyl 1-benzyl-3-oxopiperidine-4-carboxylate with morpholine-4-carboxamidine

A method has been developed for the synthesis of 4-amino-substituted 7-benzyl-2-morpholin-4-yl-5,6,7,8-tetrahydropyrido[3,4-d]pyrimidines by condensation of ethyl 1-benzyl-3-oxopiperidine-4-carboxylate with morpholine-4-carboxamidine and subsequent reaction of the 7-benzyl-2-morpholin-4-yl-5,6,7,8-tetrahydro-3H-pyrido[3,4-d]pyrimidin-4-one with trifluoromethanesulfonic anhydride and secondary amines. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 762–768, May, 2007.     

Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.     

Construction of diverse peptide structural architectures via chemoselective peptide ligation

Herein, we report the development of a facile synthetic strategy for constructing diverse peptide structural architectures via chemoselective peptide ligation. The key advancement involved is to utilize the benzofuran moiety as the peptide salicylaldehyde ester surrogate, and Dap–Ser/Lys–Ser dipeptide as the hydroxyl amino functionality, which could be successfully introduced at the side chain of peptides enabling peptide ligation. With this method, the side chain-to-side chain cyclic peptide, branched/bridged peptides, tailed cyclic peptides and multi-cyclic peptides have been designed and successfully synthesized with native peptidic linkages at the ligation sites. This strategy has provided an alternative strategic opportunity for synthetic peptide development. It also serves as an inspiration for the structural design of PPI inhibitors with new modalities.

Methods of introducing peptide salicylaldehyde esters and hydroxyl amine functionality into the peptide side chain have been developed. Diverse peptide structural motifs were constructed via ligation with native amide linkages at the ligation sites.     

Facile syntheses of all possible diastereomers of conduritol and various derivatives of inositol stereoisomers in high enantiopurity from myo-inositol

Phosphoinositide-based signaling processes are crucially important in intracellular signal transduction events. Inositol phosphate analogues have been useful in probing the structure-activity relationships between inositol phosphates and biomacromolecules, and in studying biological functions of newly found inositol phosphates. Thus, a systematic and ready access to inositol stereoisomers is highly desirable. And practical and convenient syntheses of conduritols and related compounds are also important because of their biological activities and their synthetic utilities in the preparation of other bioactive molecules. We herein report the first syntheses of all possible diastereomers of conduritol and various derivatives of eight inositol stereoisomers in high enantiopurity from myo-inositol, which involve efficient enzymatic resolution of the intermediates conduritol B and C derivatives, followed by oxidation-reduction or the Mitsunobu reaction, and cis-dihydroxylation in stereo- and regioselective manners.     

Self-assemblies of new rigid angular ligands and metal centers toward the rational construction and modification of novel coordination polymer networks

Self-assemblies of rigid angular ligands with 120 degrees molecular angle and metal centers have been investigated with the aim of achieving the rational construction and modification of coordination polymer structures. The reactions of Co(NCS)(2) with 1,3-bis(trans-4-styrylpyridyl)benzene (L(1)()), 2,6-bis(trans-4-styrylpyridyl)pyridine (L(2)()), 1,3-bis(trans-4-styrylpyrimidyl)benzene (L(3)()), and 1,3-bis(trans-4-styrylquinoly)benzene (L(4)()) afford complexes [Co(L(1)())(2)(NCS)(2)]( infinity ) (1), [Co(L(2)())(2)(NCS)(2)]( infinity ) (2), Co(L(3)())(2)(NCS)(2)(CH(3)OH)(2) (3), and [Co(L(4)())(NCS)(2)]( infinity ) (4), respectively. The resulting complexes exhibit open framework, stairlike hydrogen-bonded chain and single-stranded helical coil structures, which are controlled by the variation of the geometry around the coordination site in ligands. Moreover, the coordination of L(1)() and L(2)() to Mn(hfac)(2) (hfac = 1,1,1,5,5,5-hexafluoroacetylacetonate) yields single-stranded helical coordination polymers of [Mn(L(1)())(hfac)(2)]( infinity ) (5) and [Mn(L(2)())(hfac)(2)]( infinity ) (6), respectively.     

Characteristics of major dioxin/furan congeners in melted slag of ash from municipal solid waste incinerators

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in slag of fly ash from three municipal solid waste (MSW) incinerators were analyzed to observe any changes in characteristics and distribution of their congeners by melting process. Actual concentration and Toxic Equivalent (TEQ) concentration profiles of 17 major congeners of PCDDs/PCDFs for gas, fly ash and melted slag were compared. The distributions of PCDDs/PCDFs in different streams macroscopically showed similarities with the generally known profiles for emission gas from a municipal waste incinerator. The total concentrations of PCDDs/PCDFs in off-gas and fly ash have been known to be a function of incineration conditions and of air pollution control device utilization; however, their normalized distributions were independent of such conditions. The concentrations of PCDDs/PCDFs in the melted slag of fly ash were not related to the concentrations of PCDDs/PCDFs congeners in fly ash but were rather a function of the melting furnace type and operation. The total amount of PCDDs/PCDFs in the melted slag of fly ash contained almost 150–27,000 times less dioxin than that in fly ash, however, the TEQ of dioxin in the slag was reduced by 435–43,500 times, which could enable them to be utilized as recycled construction materials. In normalized TEQ concentration profiles of 17 congeners of PCDDs/PCDFs, the ratio of PCDFs to PCDDs changed from 1.32 to 2.19 by melting, which showed relatively higher portion of furans left in melted slag than those in fly ash. By comparing reduction ratios of different congeners, PCDDs (dioxins) were relatively easier to destruct than PCDFs (furans) during melting process. The most difficult congener to destruct could be octa-chlorinated dibenzofuran (OCDF) among major congeners. For slag cooling methods, dioxin concentration in TEQ of slow cooled slag by air was four times higher than that of fast cooled slag by water. Thus cooling by water is more appropriate with the added beneficial effect of producing granules/particles, which can be utilized as roadbed materials.