Study of supramolecular side‐chain and cross‐linking polymers by complexation of various H‐donor acids with H‐acceptor copolymers containing pendent carbazole and fluorescent pyridyl units

Two H‐bonded acceptor (H‐acceptor) homopolymers 14 and 17 were successfully prepared by polymerization of fluorescent pyridyl monomers PBT and PBOT ( 12 and 13 ), which were synthesized via Sonogashira coupling and Wittig‐Horner reactions. To increase the glass transition temperatures as well as reduce the π‐π stacking of the photoluminescent (PL) H‐acceptor copolymers and their H‐bonded polymer complexes, fluorescent monomers 12 and 13 were copolymerized with N‐vinylcarbazole monomer CAZ (23) to produce H‐acceptor copolymers 15–16 and 18–19 . Supramolecular side‐chain and crosslinking polymers (i.e., H‐bonded polymer complexes) obtained by complexation of light‐emitting H‐acceptor polymers 14–19 with various proton donor (H‐donor) acids 20–22 were further characterized by DSC, POM, FTIR, XRD, and PL measurements. The mesomorphic properties can be tuned from the nematic phase in H‐acceptor homopolymers ( 14 and 17 ) to the tilted smectic C phase in their H‐bonded polymer complexes ( 14/20–21 and 17/20–22 ) by the introduction of H‐donor acids (20–22). Moreover, the PL properties of light‐emitting H‐acceptor polymers can be adjusted not only by the central structures of the conjugated pyridyl cores but also by their surrounding nonfluorescent H‐donor acids. In general, redder shifts of PL emissions in H‐bonded polymer complexes occurred when the light‐emitting H‐acceptor polymers were complexed with H‐donors having smaller pKa values. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2734–2753, 2009     

IMPROVEMENT OF THE SEMI-ANALYTICAL METHOD, FOR DETERMINING THE GEOMETRICALLY NON-LINEAR RESPONSE OF THIN STRAIGHT STRUCTURES. PART I: APPLICATION TO CLAMPED-CLAMPED AND SIMPLY SUPPORTED-CLAMPED BEAMS

In a previous series of papers (Benamar 1990 Ph.D. Thesis, University of Southampton; Benamaret al. 1991 Journal of Sound and Vibration149, 179-195;164, 399-424 [1-3]) a general model based on Hamilton's principle and spectral analysis has been developed for non-linear free vibrations occurring at large displacement amplitudes of fully clamped beams and rectangular homogeneous and composite plates. The results obtained with this model corresponding to the first non-linear mode shape of a clamped-clamped (CC) beam and to the first non-linear mode shape of a CC plate are in good agreement with those obtained in previous experimental studies (Benamaret al. 1991 Journal of Sound and Vibration 149, 179-195;164, 399-424 [2, 3]). More recently, this model has been re-derived (Azar et al. 1999 Journal of Sound and Vibration224, 377-395; submitted [4, 5]) using spectral analysis, Lagrange's equations and the harmonic balance method, and applied to obtain the non-linear steady state forced periodic response of simply supported (SS), CC, and simply supported-clamped (SSC) beams. The practical application of this approach to engineering problems necessitates the use of appropriate software in each case or use of published tables of data, obtained from numerical solution of the non-linear algebraic system, corresponding to each problem. The present work was an attempt to develop a more practical simple “multi-mode theory” based on the linearization of the non-linear algebraic equations, written on the modal basis, in the neighbourhood of each resonance. The purpose was to derive simple formulae, which are easy to use, for engineering purposes. In this paper, two models are proposed. The first is concerned with displacement amplitudes of vibrationW_max /H, obtained at the beam centre, up to about 0·7 times the beam thickness and the second may be used for higher amplitudes W_max/H up to about 1·5 times the beam thickness. This new approach has been successfully used in the free vibration case to the first, second and third non-linear modes shapes of CC beams and to the first non-linear mode shape of a CSS beam. It has also been applied to obtain the non-linear steady state periodic forced response of CC and CSS beams, excited harmonically with concentrated and distributed forces.     

Embedding Uq(sl(2)) and Sine Algebras in Generalized Clifford Algebras

We establish the connection between certain quantum algebras and generalizedClifford algebras (GCA). To be precise, we embed the quantum tori Lie algebraand U _q (sl(2)) in GCA.     

Synthesis,characterization, and photovoltaic properties of dithienylbenzobisazole‐dithienylsilole copolymers

Three conjugated polymers comprised of dioctyl‐dithieno‐[2,3‐b:2',3'‐d]silole and a donor‐acceptor‐donor triad of either cis‐benzbisoxazole, trans‐benzobisoxazole or trans‐benzobisthiazole were synthesized via the Stille cross‐coupling reaction. The impact of varying the heteroatoms and/or the location within the benzobisazole moiety on the optical and electronic properties of the resulting polymers was evaluated via cyclic voltammetry and UV‐Visible spectroscopy. All of the polymers have similar optical band‐gaps of ～1.9 eV and highest occupied molecular orbital levels of ? 5.2 eV. However, the lowest unoccupied molecular orbitals (LUMO) ranged from ? 3.0 to ? 3.2 eV. Interestingly, when the polymers were used as donor materials in bulk‐heterojunction photovoltaic cells with PC₇₁BM as the electron‐acceptor, the benzobisoxazole‐based polymers gave slightly better results than the benzobisthiazole‐containing polymers with power conversion efficiencies up to 3.5%. These results indicate that benzobisoxazoles are promising materials for use in OPVs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1533–1540     

Mesomorphic behavior of new benzothiazole liquid crystals having Schiff base linker and terminal methyl group

正A homologous series of heterocycles,6-methyl-2-(4-alkoxybenzylidenamino)benzothiazoles,were synthesized and characterized using FT-IR,~1H and ~(13)C NMR and mass spectrometric analysis.Enantiotropic nematic phase was observed for shorter members.Smectic A phase only emerged from octyloxy derivative onwards.The terminal methyl group at the benzothiazole fragment and the Schiff base linkage influenced the mesomorphic behavior of the present series.     

COMBINED EFFECTS IN A SEMILINEAR POLYHARMONIC PROBLEM IN THE UNIT BALL

Let m be a positive integer and B be the unit ball of Rn(n ≥ 2). We investigate the existence, uniqueness and the asymptotic behavior of a positive continuous solution to the following semilinear polyharmonic boundary value problem(-△)mu = a1(x)uα1+ a2(x)uα2, lim|x|→1u(x)(1- |x|)m-1= 0,where α1, α2 ∈(-1, 1) and a1, a2 are two nonnegative measurable functions on B satisfying some appropriate assumptions related to Karamata regular variation theory.     

Spectrofluorometric Determination of Methocarbamol in Pharmaceutical Preparations and Human Plasma

A simple, sensitive and rapid spectrofluorometric method for determination of methocarbamol in pharmaceutical formulations and spiked human plasma has been developed. The proposed method is based on the measurement of the native fluorescence of methocarbamol in methanol at 313 nm after excitation at 277 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.05–2.0 μg/mL, with good correlation (r = 0.9999), limit of detection of 0.007 μg/ mL and a lower limit of quantification of 0.022 μg/ mL. The described method was successfully applied for the determination of methocarbamol in its tablets without interference from co-formulated drugs, such as aspirin, diclofenac, paracetamol and ibuprofen, The results obtained were in good agreement with those obtained using the official method (USP 30).The high sensitivity of the method allowed the determination of the studied drug in spiked human plasma with average percentage recovery of 99.42 ± 3.84.     

Search for the rare decays K(L)→π0π0μ+μ- and K(L)→π0π0X0→π0π0μ+μ-

The KTeV E799 experiment has conducted a search for the rare decays, K(L)→π(0)π(0)μ(+)μ(-) and K(L)→π(0)π(0)X(0)→π(0)π(0)μ(+)μ(-), where the X(0) is a possible new neutral boson that was reported by the HyperCP experiment with a mass of (214.3 ± 0.5) MeV/c(2). We find no evidence for either decay. We obtain upper limits of Br(K(L)→π(0)π(0)X(0)→π(0)π(0)μ(+)μ(-)) < 1.0 × 10(-10) and Br(K(L)→π(0)π(0)μ(+)μ(-)) < 9.2 × 10(-11) at the 90% confidence level. This result rules out the pseudoscalar X(0) as an explanation of the HyperCP result under the scenario that the dsX(0) coupling is completely real.     

Reaction of Mercaptoacetate and Halides Containing Activated Methylenes with Thiocarbamoylimidates: A Novel Approach to the Synthesis of Aminothiazole Derivatives

The reaction of N-thiocarbamoylimidates 1 with methyl thioglycolate leads to the formation of 4-arylamino-5-methoxycarbonylthiazoles 2. The condensation of the same imidates 1 on ethyl bromoacetate, benzyl bromide and chloroacetonitrile provides the corresponding 2-arylaminothiazoles 4.      

Simulation and Experimental Study for Degradation of Organic Dyes Using Dual pin‐to‐plate Corona Discharge Plasma reactors for Industrial Wastewater Treatment

This work researches the possibility of increasing the dye removal efficiency from wastewater using nonthermal plasma. A study for the optimal air gap distance between dual pin and surface of Acid Blue 25 dye solution and thickness of ground plate is carried out using 3D‐EM simulator to find maximum electric field intensity at the tip of both pins. The consequences display that the best gap for corona discharge is approximately 5 mm using 15 kV source. In addition, the optimum plate thickness is 0.1 mm. These distance and thickness were mentioned are constant during the study of other factors. Dual pin‐to‐plate high‐voltage corona discharge plasma system is presented to investigation experimentally the gap distance, thickness of ground plate, initial dye concentration, pH solution and conductivity on the amount of Acid Blue 25 dye color removal efficiency from wastewater. There is a large consensus among the simulation and experimental work in the air gap and thickness of ground plate. Where the decolorization for air gap 5 mm is 95.74 at time 35 min compared with 91% and 17% for 1 mm and 20 mm gap distance respectively. Also, the discharge energy at each air gap are calculated. Measurement results for the impact of thickness of an Aluminum ground plate on color removal competence showed color removal efficiencies of 86.3%, 90.78% and 98.06%, after treatment time 15 min for thicknesses of 2, 0.5 and 0.1 mm respectively. The decolorization behavior utilizing dual pin‐to‐plate corona discharge plasma system display 82% pigment evacuation proficiency inside 11min. The complete decolorization was accomplished within 28min for distinctive examined introductory color focuses 5 ppm up to 100 ppm. Likewise, the impacts of conductivity by utilizing diverse salts as AlCl3, CaCl2, KCl and NaCl and with distinctive focuses have been explored. The rising of the solution conductivity leads to the reduction of decolorization efficiency. The decolorization efficiency and discharge energy are calculated at different concentration molarity for AlCl3, CaCl2, KCl and NaCl. It was observed that the presence of salts at the same concentration level substantially decreased the rate and the extent of decolorization. The results indicate that the optimum pH for the decolorization of Acid Blue 25 dye is in the range between 3 and 6. Furthermore the conductivity and discharge energy were measurement at each value of pH. Energy yield for decolorization and Electrical Energy per Order (EE/O) under different initial pH value were calculated. A kinetic model is used to define the performance of corona discharge system under different value of pH. The model of pseudo ‐zero, pseudo‐first order, and pseudo‐second order reactions kinetic are utilized to investigate the decolorization of Acid Blue 25 dye. The rate of degradation of Acid Blue 25 dye follows the pseudo‐first order kinetics in the dye concentration. Energy consumption requirements for decolorization was considered. The outcomes will be useful for designing the plasma treatment systems suitable for industrial wastewaters. (© 2016 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)